diff --git a/hdl/debug/dm/hazard3_dm.v b/hdl/debug/dm/hazard3_dm.v
index e4971eb..6a1520f 100644
--- a/hdl/debug/dm/hazard3_dm.v
+++ b/hdl/debug/dm/hazard3_dm.v
@@ -15,7 +15,7 @@ module hazard3_dm #(
 	// multiple of 'h200, so that bits[8:2] decode correctly.
 	parameter NEXT_DM_ADDR = 32'h0000_0000,
 	// Implement support for system bus access:
-	parameter HAVE_SBA     = 1,
+	parameter HAVE_SBA     = 0,
 
 	// Do not modify:
 	parameter XLEN         = 32,                               // Do not modify
@@ -69,7 +69,7 @@ module hazard3_dm #(
 	input  wire [N_HARTS-1:0]        hart_instr_caught_ebreak,
 
 	// System bus access (optional) -- can be hooked up to the standalone AHB
-	// shim (hazard3_sba_to_ahb.v) or the SBA input port on the processor
+	// shim (hazard3_sbus_to_ahb.v) or the SBA input port on the processor
 	// wrapper, which muxes SBA into the processor's load/store bus access
 	// port. SBA does not increase debugger bus throughput, but supports
 	// minimally intrusive debug bus access for e.g. Segger RTT.
diff --git a/hdl/debug/dm/hazard3_sbus_to_ahb.v b/hdl/debug/dm/hazard3_sbus_to_ahb.v
new file mode 100644
index 0000000..ab6949b
--- /dev/null
+++ b/hdl/debug/dm/hazard3_sbus_to_ahb.v
@@ -0,0 +1,74 @@
+/*****************************************************************************\
+|                        Copyright (C) 2022 Luke Wren                         |
+|                     SPDX-License-Identifier: Apache-2.0                     |
+\*****************************************************************************/
+
+// Standalone bus shim for connecting the DM's System Bus Access to AHB
+
+`default_nettype none
+
+module hazard3_sbus_to_ahb #(
+	parameter W_ADDR = 32,
+	parameter W_DATA = 32
+) (
+	input wire               clk,
+	input wire               rst_n,
+
+	input  wire [W_ADDR-1:0] sbus_addr,
+	input  wire              sbus_write,
+	input  wire [1:0]        sbus_size,
+	input  wire              sbus_vld,
+	output wire              sbus_rdy,
+	output wire              sbus_err,
+	input  wire [W_DATA-1:0] sbus_wdata,
+	output wire [W_DATA-1:0] sbus_rdata,
+
+	output wire [W_ADDR-1:0] ahblm_haddr,
+	output wire              ahblm_hwrite,
+	output wire [1:0]        ahblm_htrans,
+	output wire [2:0]        ahblm_hsize,
+	output wire [2:0]        ahblm_hburst,
+	output wire [3:0]        ahblm_hprot,
+	output wire              ahblm_hmastlock,
+	input  wire              ahblm_hready,
+	input  wire              ahblm_hresp,
+	output wire [W_DATA-1:0] ahblm_hwdata,
+	input  wire [W_DATA-1:0] ahblm_hrdata
+);
+
+// Most signals are simple tie-throughs
+
+assign ahblm_haddr     = sbus_addr;
+assign ahblm_hwrite    = sbus_write;
+assign ahblm_hsize     = {1'b0, sbus_size};
+assign ahblm_hwdata    = sbus_wdata;
+
+// HPROT = noncacheable nonbufferable privileged data access:
+assign ahblm_hprot     = 4'b0011;
+assign ahblm_hmastlock = 1'b0;
+assign ahblm_hburst    = 3'h0;
+
+assign sbus_err        = ahblm_hresp;
+assign sbus_rdata      = ahblm_hrdata;
+
+// Handshaking
+
+reg dph_active;
+
+always @ (posedge clk or negedge rst_n) begin
+	if (!rst_n) begin
+		dph_active <= 1'b0;
+	end else if (ahblm_hready) begin
+		dph_active <= ahblm_htrans[1];
+	end
+end
+
+assign ahblm_htrans = sbus_vld && !dph_active ? 2'b10 : 2'b00;
+
+assign sbus_rdy = ahblm_hready && dph_active;
+
+endmodule
+
+`ifndef YOSYS
+`default_nettype wire
+`endif
diff --git a/test/sim/tb_cxxrtl/tb.v b/test/sim/tb_cxxrtl/tb.v
index b5e41a0..99a2851 100644
--- a/test/sim/tb_cxxrtl/tb.v
+++ b/test/sim/tb_cxxrtl/tb.v
@@ -135,6 +135,7 @@ wire [31:0]               sbus_rdata;
 
 hazard3_dm #(
 	.N_HARTS      (N_HARTS),
+	.HAVE_SBA     (1),
 	.NEXT_DM_ADDR (0)
 ) dm (
 	.clk                         (clk),
diff --git a/test/sim/tb_cxxrtl/tb_multicore.v b/test/sim/tb_cxxrtl/tb_multicore.v
index 5345f4a..9f36a26 100644
--- a/test/sim/tb_cxxrtl/tb_multicore.v
+++ b/test/sim/tb_cxxrtl/tb_multicore.v
@@ -135,6 +135,7 @@ wire [31:0]               sbus_rdata;
 
 hazard3_dm #(
 	.N_HARTS      (N_HARTS),
+	.HAVE_SBA     (1),
 	.NEXT_DM_ADDR (0)
 ) dm (
 	.clk                         (clk),