abstractaccelerator/Flow/design/el2_pic_ctrl.sv

706 lines
28 KiB
Systemverilog
Raw Normal View History

2022-05-10 21:06:26 +08:00
//********************************************************************************
// SPDX-License-Identifier: Apache-2.0
// Copyright 2020 Western Digital Corporation or its affiliates.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//********************************************************************************
//********************************************************************************
// Function: Programmable Interrupt Controller
// Comments:
//********************************************************************************
module el2_pic_ctrl #(
2022-05-23 22:16:04 +08:00
`include "el2_param.vh"
) (
input logic clk, // Core clock
input logic free_clk, // free clock
input logic rst_l, // Reset for all flops
input logic clk_override, // Clock over-ride for gating
input logic io_clk_override, // PIC IO Clock over-ride for gating
input logic [pt.PIC_TOTAL_INT_PLUS1-1:0] extintsrc_req, // Interrupt requests
input logic [ 31:0] picm_rdaddr, // Address of the register
input logic [ 31:0] picm_wraddr, // Address of the register
input logic [ 31:0] picm_wr_data, // Data to be written to the register
input logic picm_wren, // Write enable to the register
input logic picm_rden, // Read enable for the register
input logic picm_mken, // Read the Mask for the register
input logic [ 3:0] meicurpl, // Current Priority Level
input logic [ 3:0] meipt, // Current Priority Threshold
output logic mexintpend, // External Inerrupt request to the core
output logic [ 7:0] claimid, // Claim Id of the requested interrupt
output logic [ 3:0] pl, // Priority level of the requested interrupt
output logic [31:0] picm_rd_data, // Read data of the register
output logic mhwakeup, // Wake-up interrupt request
input logic scan_mode // scan mode
2022-05-10 21:06:26 +08:00
);
2022-05-23 22:16:04 +08:00
localparam NUM_LEVELS = $clog2(pt.PIC_TOTAL_INT_PLUS1);
localparam INTPRIORITY_BASE_ADDR = pt.PIC_BASE_ADDR;
localparam INTPEND_BASE_ADDR = pt.PIC_BASE_ADDR + 32'h00001000;
localparam INTENABLE_BASE_ADDR = pt.PIC_BASE_ADDR + 32'h00002000;
localparam EXT_INTR_PIC_CONFIG = pt.PIC_BASE_ADDR + 32'h00003000;
localparam EXT_INTR_GW_CONFIG = pt.PIC_BASE_ADDR + 32'h00004000;
localparam EXT_INTR_GW_CLEAR = pt.PIC_BASE_ADDR + 32'h00005000;
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
localparam INTPEND_SIZE = (pt.PIC_TOTAL_INT_PLUS1 < 32) ? 32 :
2022-05-10 21:06:26 +08:00
(pt.PIC_TOTAL_INT_PLUS1 < 64) ? 64 :
(pt.PIC_TOTAL_INT_PLUS1 < 128) ? 128 :
(pt.PIC_TOTAL_INT_PLUS1 < 256) ? 256 :
(pt.PIC_TOTAL_INT_PLUS1 < 512) ? 512 : 1024 ;
2022-05-23 22:16:04 +08:00
localparam INT_GRPS = INTPEND_SIZE / 32;
localparam INTPRIORITY_BITS = 4;
localparam ID_BITS = 8;
localparam int GW_CONFIG[pt.PIC_TOTAL_INT_PLUS1-1:0] = '{default: 0};
localparam INT_ENABLE_GRPS = (pt.PIC_TOTAL_INT_PLUS1 - 1) / 4;
logic [pt.PIC_TOTAL_INT_PLUS1-1:0] intenable_clk_enable;
logic [ INT_ENABLE_GRPS:0] intenable_clk_enable_grp;
logic [ INT_ENABLE_GRPS:0] gw_clk;
logic addr_intpend_base_match;
logic raddr_config_pic_match;
logic raddr_intenable_base_match;
logic raddr_intpriority_base_match;
logic raddr_config_gw_base_match;
logic waddr_config_pic_match;
logic waddr_intpriority_base_match;
logic waddr_intenable_base_match;
logic waddr_config_gw_base_match;
logic addr_clear_gw_base_match;
logic mexintpend_in;
logic mhwakeup_in;
logic intpend_reg_read;
logic [31:0] picm_rd_data_in, intpend_rd_out;
logic intenable_rd_out;
logic [ INTPRIORITY_BITS-1:0] intpriority_rd_out;
logic [ 1:0] gw_config_rd_out;
logic [pt.PIC_TOTAL_INT_PLUS1-1:0][INTPRIORITY_BITS-1:0] intpriority_reg;
logic [pt.PIC_TOTAL_INT_PLUS1-1:0][INTPRIORITY_BITS-1:0] intpriority_reg_inv;
logic [pt.PIC_TOTAL_INT_PLUS1-1:0] intpriority_reg_we;
logic [pt.PIC_TOTAL_INT_PLUS1-1:0] intpriority_reg_re;
logic [pt.PIC_TOTAL_INT_PLUS1-1:0][ 1:0] gw_config_reg;
logic [pt.PIC_TOTAL_INT_PLUS1-1:0] intenable_reg;
logic [pt.PIC_TOTAL_INT_PLUS1-1:0] intenable_reg_we;
logic [pt.PIC_TOTAL_INT_PLUS1-1:0] intenable_reg_re;
logic [pt.PIC_TOTAL_INT_PLUS1-1:0] gw_config_reg_we;
logic [pt.PIC_TOTAL_INT_PLUS1-1:0] gw_config_reg_re;
logic [pt.PIC_TOTAL_INT_PLUS1-1:0] gw_clear_reg_we;
logic [ INTPEND_SIZE-1:0] intpend_reg_extended;
logic [pt.PIC_TOTAL_INT_PLUS1-1:0][INTPRIORITY_BITS-1:0] intpend_w_prior_en;
logic [pt.PIC_TOTAL_INT_PLUS1-1:0][ ID_BITS-1:0] intpend_id;
logic [ INTPRIORITY_BITS-1:0] maxint;
logic [ INTPRIORITY_BITS-1:0] selected_int_priority;
logic [ INT_GRPS-1:0][ 31:0] intpend_rd_part_out;
logic config_reg;
logic intpriord;
logic config_reg_we;
logic config_reg_re;
logic config_reg_in;
logic prithresh_reg_write, prithresh_reg_read;
logic intpriority_reg_read;
logic intenable_reg_read;
logic gw_config_reg_read;
logic picm_wren_ff, picm_rden_ff;
logic [ 31:0] picm_raddr_ff;
logic [ 31:0] picm_waddr_ff;
logic [ 31:0] picm_wr_data_ff;
logic [ 3:0] mask;
logic picm_mken_ff;
logic [ ID_BITS-1:0] claimid_in;
logic [ INTPRIORITY_BITS-1:0] pl_in;
logic [ INTPRIORITY_BITS-1:0] pl_in_q;
logic [pt.PIC_TOTAL_INT_PLUS1-1:0] extintsrc_req_sync;
logic [pt.PIC_TOTAL_INT_PLUS1-1:0] extintsrc_req_gw;
logic picm_bypass_ff;
// clkens
logic pic_raddr_c1_clken;
logic pic_waddr_c1_clken;
logic pic_data_c1_clken;
logic pic_pri_c1_clken;
logic pic_int_c1_clken;
logic gw_config_c1_clken;
// clocks
logic pic_raddr_c1_clk;
logic pic_data_c1_clk;
logic pic_pri_c1_clk;
logic pic_int_c1_clk;
logic gw_config_c1_clk;
// ---- Clock gating section ------
// c1 clock enables
assign pic_raddr_c1_clken = picm_mken | picm_rden | clk_override;
assign pic_data_c1_clken = picm_wren | clk_override;
assign pic_pri_c1_clken = (waddr_intpriority_base_match & picm_wren_ff) | (raddr_intpriority_base_match & picm_rden_ff) | clk_override;
assign pic_int_c1_clken = (waddr_intenable_base_match & picm_wren_ff) | (raddr_intenable_base_match & picm_rden_ff) | clk_override;
assign gw_config_c1_clken = (waddr_config_gw_base_match & picm_wren_ff) | (raddr_config_gw_base_match & picm_rden_ff) | clk_override;
// C1 - 1 clock pulse for data
rvoclkhdr pic_addr_c1_cgc (
.en(pic_raddr_c1_clken),
.l1clk(pic_raddr_c1_clk),
.*
);
rvoclkhdr pic_data_c1_cgc (
.en(pic_data_c1_clken),
.l1clk(pic_data_c1_clk),
.*
);
rvoclkhdr pic_pri_c1_cgc (
.en(pic_pri_c1_clken),
.l1clk(pic_pri_c1_clk),
.*
);
rvoclkhdr pic_int_c1_cgc (
.en(pic_int_c1_clken),
.l1clk(pic_int_c1_clk),
.*
);
rvoclkhdr gw_config_c1_cgc (
.en(gw_config_c1_clken),
.l1clk(gw_config_c1_clk),
.*
);
// ------ end clock gating section ------------------------
assign raddr_intenable_base_match = (picm_raddr_ff[31:NUM_LEVELS+2] == INTENABLE_BASE_ADDR[31:NUM_LEVELS+2]) ;
assign raddr_intpriority_base_match = (picm_raddr_ff[31:NUM_LEVELS+2] == INTPRIORITY_BASE_ADDR[31:NUM_LEVELS+2]) ;
assign raddr_config_gw_base_match = (picm_raddr_ff[31:NUM_LEVELS+2] == EXT_INTR_GW_CONFIG[31:NUM_LEVELS+2]) ;
assign raddr_config_pic_match = (picm_raddr_ff[31:0] == EXT_INTR_PIC_CONFIG[31:0]);
assign addr_intpend_base_match = (picm_raddr_ff[31:6] == INTPEND_BASE_ADDR[31:6]);
assign waddr_config_pic_match = (picm_waddr_ff[31:0] == EXT_INTR_PIC_CONFIG[31:0]);
assign addr_clear_gw_base_match = (picm_waddr_ff[31:NUM_LEVELS+2] == EXT_INTR_GW_CLEAR[31:NUM_LEVELS+2]) ;
assign waddr_intpriority_base_match = (picm_waddr_ff[31:NUM_LEVELS+2] == INTPRIORITY_BASE_ADDR[31:NUM_LEVELS+2]) ;
assign waddr_intenable_base_match = (picm_waddr_ff[31:NUM_LEVELS+2] == INTENABLE_BASE_ADDR[31:NUM_LEVELS+2]) ;
assign waddr_config_gw_base_match = (picm_waddr_ff[31:NUM_LEVELS+2] == EXT_INTR_GW_CONFIG[31:NUM_LEVELS+2]) ;
assign picm_bypass_ff = picm_rden_ff & picm_wren_ff & ( picm_raddr_ff[31:0] == picm_waddr_ff[31:0] ); // pic writes and reads to same address together
rvdff #(32) picm_radd_flop (
.*,
.din (picm_rdaddr),
.dout(picm_raddr_ff),
.clk (pic_raddr_c1_clk)
);
rvdff #(32) picm_wadd_flop (
.*,
.din (picm_wraddr),
.dout(picm_waddr_ff),
.clk (pic_data_c1_clk)
);
rvdff #(1) picm_wre_flop (
.*,
.din (picm_wren),
.dout(picm_wren_ff),
.clk (free_clk)
);
rvdff #(1) picm_rde_flop (
.*,
.din (picm_rden),
.dout(picm_rden_ff),
.clk (free_clk)
);
rvdff #(1) picm_mke_flop (
.*,
.din (picm_mken),
.dout(picm_mken_ff),
.clk (free_clk)
);
rvdff #(32) picm_dat_flop (
.*,
.din (picm_wr_data[31:0]),
.dout(picm_wr_data_ff[31:0]),
.clk (pic_data_c1_clk)
);
//rvsyncss #(pt.PIC_TOTAL_INT_PLUS1-1) sync_inst
//(
// .clk (free_clk),
// .dout(extintsrc_req_sync[pt.PIC_TOTAL_INT_PLUS1-1:1]),
// .din (extintsrc_req[pt.PIC_TOTAL_INT_PLUS1-1:1]),
// .*) ;
//
//assign extintsrc_req_sync[0] = extintsrc_req[0];
/*
2022-05-10 21:06:26 +08:00
genvar p ;
for (p=0; p<=INT_ENABLE_GRPS ; p++) begin : IO_CLK_GRP
if (p==INT_ENABLE_GRPS) begin : LAST_GRP
assign intenable_clk_enable_grp[p] = |intenable_clk_enable[pt.PIC_TOTAL_INT_PLUS1-1 : p*4] | io_clk_override;
rvoclkhdr intenable_c1_cgc ( .en(intenable_clk_enable_grp[p]), .l1clk(gw_clk[p]), .* );
end else begin : CLK_GRPS
assign intenable_clk_enable_grp[p] = |intenable_clk_enable[p*4+3 : p*4] | io_clk_override;
rvoclkhdr intenable_c1_cgc ( .en(intenable_clk_enable_grp[p]), .l1clk(gw_clk[p]), .* );
end
end
*/
2022-05-23 22:16:04 +08:00
genvar i;
genvar p;
for (p = 0; p <= INT_ENABLE_GRPS; p++) begin : IO_CLK_GRP
wire grp_clk, grp_clken;
2022-05-10 21:06:26 +08:00
assign grp_clken = |intenable_clk_enable[(p==INT_ENABLE_GRPS?pt.PIC_TOTAL_INT_PLUS1-1:p*4+3) : p*4] | io_clk_override;
2022-05-23 22:16:04 +08:00
rvclkhdr intenable_c1_cgc (
.en(grp_clken),
.l1clk(grp_clk),
.*
);
for (
genvar i = (p == 0 ? 1 : 0);
i < (p == INT_ENABLE_GRPS ? pt.PIC_TOTAL_INT_PLUS1 - p * 4 : 4);
i++
) begin : GW
el2_configurable_gw gw_inst (
.*,
.gw_clk(grp_clk),
.rawclk(clk),
.clken(grp_clken),
.extintsrc_req(extintsrc_req[i+p*4]),
.meigwctrl_polarity(gw_config_reg[i+p*4][0]),
.meigwctrl_type(gw_config_reg[i+p*4][1]),
.meigwclr(gw_clear_reg_we[i+p*4]),
.extintsrc_req_config(extintsrc_req_gw[i+p*4])
);
2022-05-10 21:06:26 +08:00
end
2022-05-23 22:16:04 +08:00
end
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
for (i = 0; i < pt.PIC_TOTAL_INT_PLUS1; i++) begin : SETREG
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
if (i > 0) begin : NON_ZERO_INT
assign intpriority_reg_we[i] = waddr_intpriority_base_match & (picm_waddr_ff[NUM_LEVELS+1:2] == i) & picm_wren_ff;
assign intpriority_reg_re[i] = raddr_intpriority_base_match & (picm_raddr_ff[NUM_LEVELS+1:2] == i) & picm_rden_ff;
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
assign intenable_reg_we[i] = waddr_intenable_base_match & (picm_waddr_ff[NUM_LEVELS+1:2] == i) & picm_wren_ff;
assign intenable_reg_re[i] = raddr_intenable_base_match & (picm_raddr_ff[NUM_LEVELS+1:2] == i) & picm_rden_ff;
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
assign gw_config_reg_we[i] = waddr_config_gw_base_match & (picm_waddr_ff[NUM_LEVELS+1:2] == i) & picm_wren_ff;
assign gw_config_reg_re[i] = raddr_config_gw_base_match & (picm_raddr_ff[NUM_LEVELS+1:2] == i) & picm_rden_ff;
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
assign gw_clear_reg_we[i] = addr_clear_gw_base_match & (picm_waddr_ff[NUM_LEVELS+1:2] == i) & picm_wren_ff ;
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
rvdffs #(INTPRIORITY_BITS) intpriority_ff (
.*,
.en (intpriority_reg_we[i]),
.din (picm_wr_data_ff[INTPRIORITY_BITS-1:0]),
.dout(intpriority_reg[i]),
.clk (pic_pri_c1_clk)
);
rvdffs #(1) intenable_ff (
.*,
.en (intenable_reg_we[i]),
.din (picm_wr_data_ff[0]),
.dout(intenable_reg[i]),
.clk (pic_int_c1_clk)
);
rvdffs #(2) gw_config_ff (
.*,
.en (gw_config_reg_we[i]),
.din (picm_wr_data_ff[1:0]),
.dout(gw_config_reg[i]),
.clk (gw_config_c1_clk)
);
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
assign intenable_clk_enable[i] = gw_config_reg[i][1] | intenable_reg_we[i] | intenable_reg[i] | gw_clear_reg_we[i] ;
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
end else begin : INT_ZERO
assign intpriority_reg_we[i] = 1'b0 ;
assign intpriority_reg_re[i] = 1'b0 ;
assign intenable_reg_we[i] = 1'b0 ;
assign intenable_reg_re[i] = 1'b0 ;
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
assign gw_config_reg_we[i] = 1'b0 ;
assign gw_config_reg_re[i] = 1'b0 ;
assign gw_clear_reg_we[i] = 1'b0 ;
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
assign gw_config_reg[i] = '0 ;
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
assign intpriority_reg[i] = {INTPRIORITY_BITS{1'b0}} ;
assign intenable_reg[i] = 1'b0 ;
assign extintsrc_req_gw[i] = 1'b0 ;
assign extintsrc_req_sync[i] = 1'b0 ;
assign intenable_clk_enable[i] = 1'b0;
end
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
assign intpriority_reg_inv[i] = intpriord ? ~intpriority_reg[i] : intpriority_reg[i];
2022-05-10 21:06:26 +08:00
assign intpend_w_prior_en[i] = {INTPRIORITY_BITS{(extintsrc_req_gw[i] & intenable_reg[i])}} & intpriority_reg_inv[i] ;
2022-05-23 22:16:04 +08:00
assign intpend_id[i] = i;
end
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
assign pl_in[INTPRIORITY_BITS-1:0] = selected_int_priority[INTPRIORITY_BITS-1:0];
//if (pt.PIC_2CYCLE == 1) begin : genblock
//end
//else begin : genblock
//end
genvar l, m, j, k;
if (pt.PIC_2CYCLE == 1) begin : genblock
logic [NUM_LEVELS/2:0] [pt.PIC_TOTAL_INT_PLUS1+2:0] [INTPRIORITY_BITS-1:0] level_intpend_w_prior_en;
logic [NUM_LEVELS/2:0][pt.PIC_TOTAL_INT_PLUS1+2:0][ID_BITS-1:0] level_intpend_id;
logic [NUM_LEVELS:NUM_LEVELS/2] [(pt.PIC_TOTAL_INT_PLUS1/2**(NUM_LEVELS/2))+1:0] [INTPRIORITY_BITS-1:0] levelx_intpend_w_prior_en;
logic [NUM_LEVELS:NUM_LEVELS/2] [(pt.PIC_TOTAL_INT_PLUS1/2**(NUM_LEVELS/2))+1:0] [ID_BITS-1:0] levelx_intpend_id;
assign level_intpend_w_prior_en[0][pt.PIC_TOTAL_INT_PLUS1+2:0] = {
4'b0, 4'b0, 4'b0, intpend_w_prior_en[pt.PIC_TOTAL_INT_PLUS1-1:0]
};
assign level_intpend_id[0][pt.PIC_TOTAL_INT_PLUS1+2:0] = {
8'b0, 8'b0, 8'b0, intpend_id[pt.PIC_TOTAL_INT_PLUS1-1:0]
};
logic [(pt.PIC_TOTAL_INT_PLUS1/2**(NUM_LEVELS/2)):0] [INTPRIORITY_BITS-1:0] l2_intpend_w_prior_en_ff;
logic [(pt.PIC_TOTAL_INT_PLUS1/2**(NUM_LEVELS/2)):0][ID_BITS-1:0] l2_intpend_id_ff;
assign levelx_intpend_w_prior_en[NUM_LEVELS/2][(pt.PIC_TOTAL_INT_PLUS1/2**(NUM_LEVELS/2))+1:0] = {
{1 * INTPRIORITY_BITS{1'b0}},
l2_intpend_w_prior_en_ff[(pt.PIC_TOTAL_INT_PLUS1/2**(NUM_LEVELS/2)):0]
};
assign levelx_intpend_id[NUM_LEVELS/2][(pt.PIC_TOTAL_INT_PLUS1/2**(NUM_LEVELS/2))+1:0] = {
{1 * ID_BITS{1'b1}}, l2_intpend_id_ff[(pt.PIC_TOTAL_INT_PLUS1/2**(NUM_LEVELS/2)):0]
};
/// Do the prioritization of the interrupts here ////////////
for (l = 0; l < NUM_LEVELS / 2; l++) begin : TOP_LEVEL
for (m = 0; m <= (pt.PIC_TOTAL_INT_PLUS1) / (2 ** (l + 1)); m++) begin : COMPARE
if (m == (pt.PIC_TOTAL_INT_PLUS1) / (2 ** (l + 1))) begin
assign level_intpend_w_prior_en[l+1][m+1] = '0;
assign level_intpend_id[l+1][m+1] = '0;
2022-05-10 21:06:26 +08:00
end
2022-05-23 22:16:04 +08:00
el2_cmp_and_mux #(
.ID_BITS(ID_BITS),
.INTPRIORITY_BITS(INTPRIORITY_BITS)
) cmp_l1 (
.a_id(level_intpend_id[l][2*m]),
.a_priority(level_intpend_w_prior_en[l][2*m]),
.b_id(level_intpend_id[l][2*m+1]),
.b_priority(level_intpend_w_prior_en[l][2*m+1]),
.out_id(level_intpend_id[l+1][m]),
.out_priority(level_intpend_w_prior_en[l+1][m])
);
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
end
2022-05-10 21:06:26 +08:00
end
2022-05-23 22:16:04 +08:00
for (i = 0; i <= pt.PIC_TOTAL_INT_PLUS1 / 2 ** (NUM_LEVELS / 2); i++) begin : MIDDLE_FLOPS
rvdff #(INTPRIORITY_BITS) level2_intpend_prior_reg (
.*,
.din (level_intpend_w_prior_en[NUM_LEVELS/2][i]),
.dout(l2_intpend_w_prior_en_ff[i]),
.clk (free_clk)
);
rvdff #(ID_BITS) level2_intpend_id_reg (
.*,
.din (level_intpend_id[NUM_LEVELS/2][i]),
.dout(l2_intpend_id_ff[i]),
.clk (free_clk)
);
2022-05-10 21:06:26 +08:00
end
2022-05-23 22:16:04 +08:00
for (j = NUM_LEVELS / 2; j < NUM_LEVELS; j++) begin : BOT_LEVELS
for (k = 0; k <= (pt.PIC_TOTAL_INT_PLUS1) / (2 ** (j + 1)); k++) begin : COMPARE
if (k == (pt.PIC_TOTAL_INT_PLUS1) / (2 ** (j + 1))) begin
assign levelx_intpend_w_prior_en[j+1][k+1] = '0;
assign levelx_intpend_id[j+1][k+1] = '0;
end
el2_cmp_and_mux #(
.ID_BITS(ID_BITS),
.INTPRIORITY_BITS(INTPRIORITY_BITS)
) cmp_l1 (
.a_id(levelx_intpend_id[j][2*k]),
.a_priority(levelx_intpend_w_prior_en[j][2*k]),
.b_id(levelx_intpend_id[j][2*k+1]),
.b_priority(levelx_intpend_w_prior_en[j][2*k+1]),
.out_id(levelx_intpend_id[j+1][k]),
.out_priority(levelx_intpend_w_prior_en[j+1][k])
);
end
end
assign claimid_in[ID_BITS-1:0] = levelx_intpend_id[NUM_LEVELS][0] ; // This is the last level output
assign selected_int_priority[INTPRIORITY_BITS-1:0] = levelx_intpend_w_prior_en[NUM_LEVELS][0];
end else begin : genblock
logic [NUM_LEVELS:0] [pt.PIC_TOTAL_INT_PLUS1+1:0] [INTPRIORITY_BITS-1:0] level_intpend_w_prior_en;
logic [NUM_LEVELS:0][pt.PIC_TOTAL_INT_PLUS1+1:0][ID_BITS-1:0] level_intpend_id;
assign level_intpend_w_prior_en[0][pt.PIC_TOTAL_INT_PLUS1+1:0] = {
{2 * INTPRIORITY_BITS{1'b0}}, intpend_w_prior_en[pt.PIC_TOTAL_INT_PLUS1-1:0]
};
assign level_intpend_id[0][pt.PIC_TOTAL_INT_PLUS1+1:0] = {
{2 * ID_BITS{1'b1}}, intpend_id[pt.PIC_TOTAL_INT_PLUS1-1:0]
};
/// Do the prioritization of the interrupts here ////////////
// genvar l, m , j, k; already declared outside ifdef
for (l = 0; l < NUM_LEVELS; l++) begin : LEVEL
for (m = 0; m <= (pt.PIC_TOTAL_INT_PLUS1) / (2 ** (l + 1)); m++) begin : COMPARE
if (m == (pt.PIC_TOTAL_INT_PLUS1) / (2 ** (l + 1))) begin
assign level_intpend_w_prior_en[l+1][m+1] = '0;
assign level_intpend_id[l+1][m+1] = '0;
end
el2_cmp_and_mux #(
.ID_BITS(ID_BITS),
.INTPRIORITY_BITS(INTPRIORITY_BITS)
) cmp_l1 (
.a_id(level_intpend_id[l][2*m]),
.a_priority(level_intpend_w_prior_en[l][2*m]),
.b_id(level_intpend_id[l][2*m+1]),
.b_priority(level_intpend_w_prior_en[l][2*m+1]),
.out_id(level_intpend_id[l+1][m]),
.out_priority(level_intpend_w_prior_en[l+1][m])
);
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
end
end
assign claimid_in[ID_BITS-1:0] = level_intpend_id[NUM_LEVELS][0] ; // This is the last level output
assign selected_int_priority[INTPRIORITY_BITS-1:0] = level_intpend_w_prior_en[NUM_LEVELS][0];
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
end
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
///////////////////////////////////////////////////////////////////////
// Config Reg`
///////////////////////////////////////////////////////////////////////
assign config_reg_we = waddr_config_pic_match & picm_wren_ff;
assign config_reg_re = raddr_config_pic_match & picm_rden_ff;
assign config_reg_in = picm_wr_data_ff[0]; //
rvdffs #(1) config_reg_ff (
.*,
.clk (free_clk),
.en (config_reg_we),
.din (config_reg_in),
.dout(config_reg)
);
assign intpriord = config_reg;
//////////////////////////////////////////////////////////////////////////
// Send the interrupt to the core if it is above the thresh-hold
//////////////////////////////////////////////////////////////////////////
///////////////////////////////////////////////////////////
/// ClaimId Reg and Corresponding PL
///////////////////////////////////////////////////////////
//
assign pl_in_q[INTPRIORITY_BITS-1:0] = intpriord ? ~pl_in : pl_in;
rvdff #(ID_BITS) claimid_ff (
.*,
.din (claimid_in[ID_BITS-1:00]),
.dout(claimid[ID_BITS-1:00]),
.clk (free_clk)
);
rvdff #(INTPRIORITY_BITS) pl_ff (
.*,
.din (pl_in_q[INTPRIORITY_BITS-1:0]),
.dout(pl[INTPRIORITY_BITS-1:0]),
.clk (free_clk)
);
logic [INTPRIORITY_BITS-1:0] meipt_inv, meicurpl_inv;
assign meipt_inv[INTPRIORITY_BITS-1:0] = intpriord ? ~meipt[INTPRIORITY_BITS-1:0] : meipt[INTPRIORITY_BITS-1:0] ;
assign meicurpl_inv[INTPRIORITY_BITS-1:0] = intpriord ? ~meicurpl[INTPRIORITY_BITS-1:0] : meicurpl[INTPRIORITY_BITS-1:0] ;
assign mexintpend_in = (( selected_int_priority[INTPRIORITY_BITS-1:0] > meipt_inv[INTPRIORITY_BITS-1:0]) &
2022-05-10 21:06:26 +08:00
( selected_int_priority[INTPRIORITY_BITS-1:0] > meicurpl_inv[INTPRIORITY_BITS-1:0]) );
2022-05-23 22:16:04 +08:00
rvdff #(1) mexintpend_ff (
.*,
.clk (free_clk),
.din (mexintpend_in),
.dout(mexintpend)
);
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
assign maxint[INTPRIORITY_BITS-1:0] = intpriord ? 0 : 15;
assign mhwakeup_in = (pl_in_q[INTPRIORITY_BITS-1:0] == maxint);
rvdff #(1) wake_up_ff (
.*,
.clk (free_clk),
.din (mhwakeup_in),
.dout(mhwakeup)
);
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
//////////////////////////////////////////////////////////////////////////
// Reads of register.
// 1- intpending
//////////////////////////////////////////////////////////////////////////
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
assign intpend_reg_read = addr_intpend_base_match & picm_rden_ff;
assign intpriority_reg_read = raddr_intpriority_base_match & picm_rden_ff;
assign intenable_reg_read = raddr_intenable_base_match & picm_rden_ff;
assign gw_config_reg_read = raddr_config_gw_base_match & picm_rden_ff;
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
assign intpend_reg_extended[INTPEND_SIZE-1:0] = {
{INTPEND_SIZE - pt.PIC_TOTAL_INT_PLUS1{1'b0}}, extintsrc_req_gw[pt.PIC_TOTAL_INT_PLUS1-1:0]
};
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
for (i = 0; i < (INT_GRPS); i++) begin
assign intpend_rd_part_out[i] = (({32{intpend_reg_read & picm_raddr_ff[5:2] == i}}) & intpend_reg_extended[((32*i)+31):(32*i)]) ;
end
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
always_comb begin : INTPEND_RD
intpend_rd_out = '0;
for (int i = 0; i < INT_GRPS; i++) begin
intpend_rd_out |= intpend_rd_part_out[i];
end
end
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
always_comb begin : INTEN_RD
intenable_rd_out = '0;
intpriority_rd_out = '0;
gw_config_rd_out = '0;
for (int i = 0; i < pt.PIC_TOTAL_INT_PLUS1; i++) begin
if (intenable_reg_re[i]) begin
intenable_rd_out = intenable_reg[i];
end
if (intpriority_reg_re[i]) begin
intpriority_rd_out = intpriority_reg[i];
end
if (gw_config_reg_re[i]) begin
gw_config_rd_out = gw_config_reg[i];
end
end
end
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
assign picm_rd_data_in[31:0] = ({32{intpend_reg_read }} & intpend_rd_out ) |
2022-05-10 21:06:26 +08:00
({32{intpriority_reg_read }} & {{32-INTPRIORITY_BITS{1'b0}}, intpriority_rd_out } ) |
({32{intenable_reg_read }} & {31'b0 , intenable_rd_out } ) |
({32{gw_config_reg_read }} & {30'b0 , gw_config_rd_out } ) |
({32{config_reg_re }} & {31'b0 , config_reg } ) |
({32{picm_mken_ff & mask[3]}} & {30'b0 , 2'b11 } ) |
({32{picm_mken_ff & mask[2]}} & {31'b0 , 1'b1 } ) |
({32{picm_mken_ff & mask[1]}} & {28'b0 , 4'b1111 } ) |
({32{picm_mken_ff & mask[0]}} & 32'b0 ) ;
2022-05-23 22:16:04 +08:00
assign picm_rd_data[31:0] = picm_bypass_ff ? picm_wr_data_ff[31:0] : picm_rd_data_in[31:0];
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
logic [14:0] address;
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
assign address[14:0] = picm_raddr_ff[14:0];
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
`include "pic_map_auto.h"
2022-05-10 21:06:26 +08:00
endmodule
2022-05-23 22:16:04 +08:00
module el2_cmp_and_mux #(
parameter ID_BITS = 8,
INTPRIORITY_BITS = 4
) (
input logic [ ID_BITS-1:0] a_id,
input logic [INTPRIORITY_BITS-1:0] a_priority,
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
input logic [ ID_BITS-1:0] b_id,
input logic [INTPRIORITY_BITS-1:0] b_priority,
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
output logic [ ID_BITS-1:0] out_id,
output logic [INTPRIORITY_BITS-1:0] out_priority
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
);
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
logic a_is_lt_b;
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
assign a_is_lt_b = (a_priority[INTPRIORITY_BITS-1:0] < b_priority[INTPRIORITY_BITS-1:0]);
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
assign out_id[ID_BITS-1:0] = a_is_lt_b ? b_id[ID_BITS-1:0] : a_id[ID_BITS-1:0];
assign out_priority[INTPRIORITY_BITS-1:0] = a_is_lt_b ? b_priority[INTPRIORITY_BITS-1:0] :
2022-05-10 21:06:26 +08:00
a_priority[INTPRIORITY_BITS-1:0] ;
2022-05-23 22:16:04 +08:00
endmodule // cmp_and_mux
2022-05-10 21:06:26 +08:00
module el2_configurable_gw (
2022-05-23 22:16:04 +08:00
input logic gw_clk,
input logic rawclk,
input logic clken,
input logic rst_l,
input logic extintsrc_req,
input logic meigwctrl_polarity,
input logic meigwctrl_type,
input logic meigwclr,
output logic extintsrc_req_config
);
2022-05-10 21:06:26 +08:00
2022-05-23 22:16:04 +08:00
logic gw_int_pending_in, gw_int_pending, extintsrc_req_sync;
2022-05-10 21:06:26 +08:00
2022-05-23 23:37:09 +08:00
rvsyncss #(1) sync_inst (
.clk (gw_clk),
2022-05-23 22:16:04 +08:00
.dout(extintsrc_req_sync),
.din (extintsrc_req),
.*
);
2022-05-10 21:06:26 +08:00
assign gw_int_pending_in = (extintsrc_req_sync ^ meigwctrl_polarity) | (gw_int_pending & ~meigwclr) ;
2022-05-23 23:37:09 +08:00
rvdff #(1) int_pend_ff (
2022-05-23 22:16:04 +08:00
.*,
2022-05-23 23:37:09 +08:00
.clk (gw_clk),
.din (gw_int_pending_in),
2022-05-23 22:16:04 +08:00
.dout(gw_int_pending)
);
2022-05-10 21:06:26 +08:00
assign extintsrc_req_config = meigwctrl_type ? ((extintsrc_req_sync ^ meigwctrl_polarity) | gw_int_pending) : (extintsrc_req_sync ^ meigwctrl_polarity) ;
2022-05-23 22:16:04 +08:00
endmodule // configurable_gw
2022-05-10 21:06:26 +08:00