abstractaccelerator/Cores-SweRV/design/lsu/lsu_stbuf.sv

415 lines
25 KiB
Systemverilog

// SPDX-License-Identifier: Apache-2.0
// Copyright 2019 Western Digital Corporation or its affiliates.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//********************************************************************************
// $Id$
//
//
// Owner:
// Function: Store Buffer
// Comments: Dual writes and single drain
//
//
// DC1 -> DC2 -> DC3 -> DC4 (Commit)
//
// //********************************************************************************
module lsu_stbuf
import swerv_types::*;
(
input logic clk, // core clock
input logic rst_l, // reset
input logic lsu_freeze_c2_dc2_clk, // freeze clock
input logic lsu_freeze_c2_dc3_clk, // freeze clock
input logic lsu_freeze_c1_dc2_clk, // freeze clock
input logic lsu_freeze_c1_dc3_clk, // freeze clock
input logic lsu_freeze_c2_dc2_clken,
input logic lsu_freeze_c2_dc3_clken,
input logic lsu_freeze_c1_dc2_clken,
input logic lsu_freeze_c1_dc3_clken,
input logic lsu_c1_dc4_clk, // lsu pipe clock
input logic lsu_c1_dc5_clk, // lsu pipe clock
input logic lsu_c2_dc4_clk, // lsu pipe clock
input logic lsu_c2_dc5_clk, // lsu pipe clock
input logic lsu_stbuf_c1_clk, // stbuf clock
input logic lsu_free_c2_clk, // free clk
// Store Buffer input
input logic load_stbuf_reqvld_dc3, // core instruction goes to stbuf
input logic store_stbuf_reqvld_dc3, // core instruction goes to stbuf
//input logic ldst_stbuf_reqvld_dc3,
input logic addr_in_pic_dc2, // address is in pic
input logic addr_in_pic_dc3, // address is in pic
input logic addr_in_dccm_dc2, // address is in pic
input logic addr_in_dccm_dc3, // address is in pic
input logic [`RV_DCCM_DATA_WIDTH-1:0] store_ecc_datafn_hi_dc3, // data to write
input logic [`RV_DCCM_DATA_WIDTH-1:0] store_ecc_datafn_lo_dc3, // data to write
input logic isldst_dc1, // instruction in dc1 is lsu
input logic dccm_ldst_dc2, // instruction in dc2 is lsu
input logic dccm_ldst_dc3, // instruction in dc3 is lsu
input logic single_ecc_error_hi_dc3, // single ecc error in hi bank
input logic single_ecc_error_lo_dc3, // single ecc error in lo bank
input logic lsu_single_ecc_error_dc5, // single_ecc_error in either bank staged to the dc5 - needed for the load repairs
input logic lsu_commit_dc5, // lsu commits
input logic lsu_freeze_dc3, // lsu freeze
input logic flush_prior_dc5, // Flush is due to i0 and ld/st is in i1
// Store Buffer output
output logic stbuf_reqvld_any, // stbuf is draining
output logic stbuf_reqvld_flushed_any, // Top entry is flushed
output logic stbuf_addr_in_pic_any, // address maps to pic
output logic [`RV_DCCM_BYTE_WIDTH-1:0] stbuf_byteen_any, // which bytes are active
output logic [`RV_LSU_SB_BITS-1:0] stbuf_addr_any, // address
output logic [`RV_DCCM_DATA_WIDTH-1:0] stbuf_data_any, // stbuf data
input logic lsu_stbuf_commit_any, // pop the stbuf as it commite
output logic lsu_stbuf_full_any, // stbuf is full
output logic lsu_stbuf_empty_any, // stbuf is empty
output logic lsu_stbuf_nodma_empty_any, // stbuf is empty except dma
output logic lsu_load_ecc_stbuf_full_dc3, // Load with ecc error can't allocate to stbuf
input logic [`RV_LSU_SB_BITS-1:0] lsu_addr_dc1, // lsu address
input logic [`RV_LSU_SB_BITS-1:0] lsu_addr_dc2,
input logic [`RV_LSU_SB_BITS-1:0] lsu_addr_dc3,
input logic [`RV_LSU_SB_BITS-1:0] end_addr_dc1, // lsu end addrress - needed to check unaligned
input logic [`RV_LSU_SB_BITS-1:0] end_addr_dc2,
input logic [`RV_LSU_SB_BITS-1:0] end_addr_dc3,
// Forwarding signals
input logic lsu_cmpen_dc2, // needed for forwarding stbuf - load
input lsu_pkt_t lsu_pkt_dc2,
input lsu_pkt_t lsu_pkt_dc3,
input lsu_pkt_t lsu_pkt_dc5,
output logic [`RV_DCCM_DATA_WIDTH-1:0] stbuf_fwddata_hi_dc3, // stbuf data
output logic [`RV_DCCM_DATA_WIDTH-1:0] stbuf_fwddata_lo_dc3,
output logic [`RV_DCCM_BYTE_WIDTH-1:0] stbuf_fwdbyteen_hi_dc3,
output logic [`RV_DCCM_BYTE_WIDTH-1:0] stbuf_fwdbyteen_lo_dc3,
input logic scan_mode
);
`include "global.h"
localparam DEPTH = LSU_STBUF_DEPTH;
localparam DATA_WIDTH = DCCM_DATA_WIDTH;
localparam BYTE_WIDTH = DCCM_BYTE_WIDTH;
localparam DEPTH_LOG2 = $clog2(DEPTH);
logic [DEPTH-1:0] stbuf_data_vld;
logic [DEPTH-1:0] stbuf_drain_vld;
logic [DEPTH-1:0] stbuf_flush_vld;
logic [DEPTH-1:0] stbuf_addr_in_pic;
logic [DEPTH-1:0] stbuf_dma;
logic [DEPTH-1:0][LSU_SB_BITS-1:0] stbuf_addr;
logic [DEPTH-1:0][BYTE_WIDTH-1:0] stbuf_byteen;
logic [DEPTH-1:0][DATA_WIDTH-1:0] stbuf_data;
logic [DEPTH-1:0] sel_lo;
logic [DEPTH-1:0] stbuf_wr_en;
logic [DEPTH-1:0] stbuf_data_en;
logic [DEPTH-1:0] stbuf_drain_or_flush_en;
logic [DEPTH-1:0] stbuf_flush_en;
logic [DEPTH-1:0] stbuf_drain_en;
logic [DEPTH-1:0] stbuf_reset;
logic [DEPTH-1:0][LSU_SB_BITS-1:0] stbuf_addrin;
logic [DEPTH-1:0][DATA_WIDTH-1:0] stbuf_datain;
logic [DEPTH-1:0][BYTE_WIDTH-1:0] stbuf_byteenin;
logic [7:0] ldst_byteen_dc3;
logic [7:0] store_byteen_ext_dc3;
logic [BYTE_WIDTH-1:0] store_byteen_hi_dc3;
logic [BYTE_WIDTH-1:0] store_byteen_lo_dc3;
logic ldst_stbuf_reqvld_dc3;
logic dual_ecc_error_dc3;
logic dual_stbuf_write_dc3;
logic WrPtrEn, RdPtrEn;
logic [DEPTH_LOG2-1:0] WrPtr, RdPtr;
logic [DEPTH_LOG2-1:0] NxtWrPtr, NxtRdPtr;
logic [DEPTH_LOG2-1:0] WrPtrPlus1, WrPtrPlus1_dc5, WrPtrPlus2, RdPtrPlus1;
logic [DEPTH_LOG2-1:0] WrPtr_dc3, WrPtr_dc4, WrPtr_dc5;
logic ldst_dual_dc1, ldst_dual_dc2, ldst_dual_dc3, ldst_dual_dc4, ldst_dual_dc5;
logic ldst_stbuf_reqvld_dc4, ldst_stbuf_reqvld_dc5;
logic dual_stbuf_write_dc4, dual_stbuf_write_dc5;
logic [3:0] stbuf_numvld_any, stbuf_specvld_any;
logic [1:0] stbuf_specvld_dc1, stbuf_specvld_dc2, stbuf_specvld_dc3;
logic stbuf_oneavl_any, stbuf_twoavl_any;
logic cmpen_hi_dc2, cmpen_lo_dc2, jit_in_same_region;
logic [LSU_SB_BITS-1:$clog2(BYTE_WIDTH)] cmpaddr_hi_dc2, cmpaddr_lo_dc2;
logic stbuf_ldmatch_hi_hi, stbuf_ldmatch_hi_lo;
logic stbuf_ldmatch_lo_hi, stbuf_ldmatch_lo_lo;
logic [BYTE_WIDTH-1:0] stbuf_fwdbyteen_hi_hi, stbuf_fwdbyteen_hi_lo;
logic [BYTE_WIDTH-1:0] stbuf_fwdbyteen_lo_hi, stbuf_fwdbyteen_lo_lo;
logic [DATA_WIDTH-1:0] stbuf_fwddata_hi_hi, stbuf_fwddata_hi_lo;
logic [DATA_WIDTH-1:0] stbuf_fwddata_lo_hi, stbuf_fwddata_lo_lo;
logic [DEPTH-1:0] stbuf_ldmatch_hi, stbuf_ldmatch_lo;
logic [DEPTH-1:0][BYTE_WIDTH-1:0] stbuf_fwdbyteenvec_hi, stbuf_fwdbyteenvec_lo;
logic [DEPTH-1:0][DATA_WIDTH-1:0] stbuf_fwddatavec_hi, stbuf_fwddatavec_lo;
logic [DATA_WIDTH-1:0] stbuf_fwddata_hi_dc2, stbuf_fwddata_lo_dc2;
logic [DATA_WIDTH-1:0] stbuf_fwddata_hi_fn_dc2, stbuf_fwddata_lo_fn_dc2;
logic [BYTE_WIDTH-1:0] stbuf_fwdbyteen_hi_dc2, stbuf_fwdbyteen_lo_dc2;
logic [BYTE_WIDTH-1:0] stbuf_fwdbyteen_hi_fn_dc2, stbuf_fwdbyteen_lo_fn_dc2;
logic stbuf_load_repair_dc5;
//----------------------------------------
// Logic starts here
//----------------------------------------
// Create high/low byte enables
assign ldst_byteen_dc3[7:0] = ({8{lsu_pkt_dc3.by}} & 8'b0000_0001) |
({8{lsu_pkt_dc3.half}} & 8'b0000_0011) |
({8{lsu_pkt_dc3.word}} & 8'b0000_1111) |
({8{lsu_pkt_dc3.dword}} & 8'b1111_1111);
assign store_byteen_ext_dc3[7:0] = ldst_byteen_dc3[7:0] << lsu_addr_dc3[1:0];
assign store_byteen_hi_dc3[BYTE_WIDTH-1:0] = store_byteen_ext_dc3[7:4];
assign store_byteen_lo_dc3[BYTE_WIDTH-1:0] = store_byteen_ext_dc3[3:0];
assign RdPtrPlus1[DEPTH_LOG2-1:0] = RdPtr[DEPTH_LOG2-1:0] + 1'b1;
assign WrPtrPlus1[DEPTH_LOG2-1:0] = WrPtr[DEPTH_LOG2-1:0] + 1'b1;
assign WrPtrPlus2[DEPTH_LOG2-1:0] = WrPtr[DEPTH_LOG2-1:0] + 2'b10;
assign WrPtrPlus1_dc5[DEPTH_LOG2-1:0] = WrPtr_dc5[DEPTH_LOG2-1:0] + 1'b1;
// ecc error on both hi/lo
assign ldst_dual_dc1 = (lsu_addr_dc1[2] != end_addr_dc1[2]);
assign dual_ecc_error_dc3 = (single_ecc_error_hi_dc3 & single_ecc_error_lo_dc3);
assign dual_stbuf_write_dc3 = ldst_dual_dc3 & (store_stbuf_reqvld_dc3 | dual_ecc_error_dc3);
assign ldst_stbuf_reqvld_dc3 = store_stbuf_reqvld_dc3 |
(load_stbuf_reqvld_dc3 & (dual_ecc_error_dc3 ? stbuf_twoavl_any : stbuf_oneavl_any)); // Don't correct ecc if not enough entries. Load will be flushed and come back again
assign stbuf_load_repair_dc5 = lsu_single_ecc_error_dc5 & (lsu_pkt_dc5.valid & lsu_pkt_dc5.load & ~flush_prior_dc5);
// Store Buffer instantiation
for (genvar i=0; i<DEPTH; i++) begin: GenStBuf
assign stbuf_wr_en[i] = ldst_stbuf_reqvld_dc3 & ((i == WrPtr[DEPTH_LOG2-1:0]) |
(i == WrPtrPlus1[DEPTH_LOG2-1:0] & dual_stbuf_write_dc3));
assign stbuf_data_en[i] = stbuf_wr_en[i];
assign stbuf_drain_or_flush_en[i] = ldst_stbuf_reqvld_dc5 & ~lsu_pkt_dc5.dma & ((i == WrPtr_dc5[DEPTH_LOG2-1:0]) |
(i == WrPtrPlus1_dc5[DEPTH_LOG2-1:0] & dual_stbuf_write_dc5));
assign stbuf_drain_en[i] = (stbuf_drain_or_flush_en[i] & lsu_commit_dc5) | (stbuf_wr_en[i] & lsu_pkt_dc3.dma);
assign stbuf_flush_en[i] = stbuf_drain_or_flush_en[i] & ~lsu_commit_dc5;
assign stbuf_reset[i] = (lsu_stbuf_commit_any | stbuf_reqvld_flushed_any) & (i == RdPtr[DEPTH_LOG2-1:0]);
// Mux select for start/end address
assign sel_lo[i] = (~ldst_dual_dc3 | (store_stbuf_reqvld_dc3 | single_ecc_error_lo_dc3)) & (i == WrPtr[DEPTH_LOG2-1:0]);
assign stbuf_addrin[i][LSU_SB_BITS-1:0] = sel_lo[i] ? lsu_addr_dc3[LSU_SB_BITS-1:0] : end_addr_dc3[LSU_SB_BITS-1:0];
assign stbuf_byteenin[i][BYTE_WIDTH-1:0] = sel_lo[i] ? store_byteen_lo_dc3[BYTE_WIDTH-1:0] : store_byteen_hi_dc3[BYTE_WIDTH-1:0];
assign stbuf_datain[i][DATA_WIDTH-1:0] = sel_lo[i] ? store_ecc_datafn_lo_dc3[DATA_WIDTH-1:0] : store_ecc_datafn_hi_dc3[DATA_WIDTH-1:0];
rvdffsc #(.WIDTH(1)) stbuf_data_vldff (.din(1'b1), .dout(stbuf_data_vld[i]), .en(stbuf_wr_en[i]), .clear(stbuf_reset[i]), .clk(lsu_stbuf_c1_clk), .*);
rvdffsc #(.WIDTH(1)) stbuf_drain_vldff (.din(1'b1), .dout(stbuf_drain_vld[i]), .en(stbuf_drain_en[i]), .clear(stbuf_reset[i]), .clk(lsu_free_c2_clk), .*);
rvdffsc #(.WIDTH(1)) stbuf_flush_vldff (.din(1'b1), .dout(stbuf_flush_vld[i]), .en(stbuf_flush_en[i]), .clear(stbuf_reset[i]), .clk(lsu_free_c2_clk), .*);
rvdffs #(.WIDTH(1)) stbuf_dma_picff (.din(lsu_pkt_dc3.dma), .dout(stbuf_dma[i]), .en(stbuf_wr_en[i]), .clk(lsu_stbuf_c1_clk), .*);
rvdffs #(.WIDTH(1)) stbuf_addr_in_picff (.din(addr_in_pic_dc3), .dout(stbuf_addr_in_pic[i]), .en(stbuf_wr_en[i]), .clk(lsu_stbuf_c1_clk), .*);
rvdffe #(.WIDTH(LSU_SB_BITS)) stbuf_addrff (.din(stbuf_addrin[i][LSU_SB_BITS-1:0]), .dout(stbuf_addr[i][LSU_SB_BITS-1:0]), .en(stbuf_wr_en[i]), .*);
rvdffs #(.WIDTH(BYTE_WIDTH)) stbuf_byteenff (.din(stbuf_byteenin[i][BYTE_WIDTH-1:0]), .dout(stbuf_byteen[i][BYTE_WIDTH-1:0]), .en(stbuf_wr_en[i]), .clk(lsu_stbuf_c1_clk), .*);
rvdffe #(.WIDTH(DATA_WIDTH)) stbuf_dataff (.din(stbuf_datain[i][DATA_WIDTH-1:0]), .dout(stbuf_data[i][DATA_WIDTH-1:0]), .en(stbuf_data_en[i]), .*);
end
// WrPtr flops to dc5
assign WrPtr_dc3[DEPTH_LOG2-1:0] = WrPtr[DEPTH_LOG2-1:0];
rvdff #(.WIDTH(DEPTH_LOG2)) WrPtr_dc4ff (.din(WrPtr_dc3[DEPTH_LOG2-1:0]), .dout(WrPtr_dc4[DEPTH_LOG2-1:0]), .clk(lsu_c1_dc4_clk), .*);
rvdff #(.WIDTH(DEPTH_LOG2)) WrPtr_dc5ff (.din(WrPtr_dc4[DEPTH_LOG2-1:0]), .dout(WrPtr_dc5[DEPTH_LOG2-1:0]), .clk(lsu_c1_dc5_clk), .*);
rvdff_fpga #(.WIDTH(1)) ldst_dual_dc2ff (.din(ldst_dual_dc1), .dout(ldst_dual_dc2), .clk(lsu_freeze_c1_dc2_clk), .clken(lsu_freeze_c1_dc2_clken), .rawclk(clk), .*);
rvdff_fpga #(.WIDTH(1)) ldst_dual_dc3ff (.din(ldst_dual_dc2), .dout(ldst_dual_dc3), .clk(lsu_freeze_c1_dc3_clk), .clken(lsu_freeze_c1_dc3_clken), .rawclk(clk), .*);
rvdff_fpga #(.WIDTH(BYTE_WIDTH)) stbuf_fwdbyteen_hi_dc3ff (.din(stbuf_fwdbyteen_hi_fn_dc2[BYTE_WIDTH-1:0]), .dout(stbuf_fwdbyteen_hi_dc3[BYTE_WIDTH-1:0]), .clk(lsu_freeze_c1_dc3_clk), .clken(lsu_freeze_c1_dc3_clken), .rawclk(clk), .*);
rvdff_fpga #(.WIDTH(BYTE_WIDTH)) stbuf_fwdbyteen_lo_dc3ff (.din(stbuf_fwdbyteen_lo_fn_dc2[BYTE_WIDTH-1:0]), .dout(stbuf_fwdbyteen_lo_dc3[BYTE_WIDTH-1:0]), .clk(lsu_freeze_c1_dc3_clk), .clken(lsu_freeze_c1_dc3_clken), .rawclk(clk), .*);
rvdff #(.WIDTH(1)) ldst_dual_dc4ff (.din(ldst_dual_dc3), .dout(ldst_dual_dc4), .clk(lsu_c1_dc4_clk), .*);
rvdff #(.WIDTH(1)) ldst_dual_dc5ff (.din(ldst_dual_dc4), .dout(ldst_dual_dc5), .clk(lsu_c1_dc5_clk), .*);
rvdff #(.WIDTH(1)) dual_stbuf_write_dc4ff (.din(dual_stbuf_write_dc3), .dout(dual_stbuf_write_dc4), .clk(lsu_c1_dc4_clk), .*);
rvdff #(.WIDTH(1)) dual_stbuf_write_dc5ff (.din(dual_stbuf_write_dc4), .dout(dual_stbuf_write_dc5), .clk(lsu_c1_dc5_clk), .*);
rvdff #(.WIDTH(1)) ldst_reqvld_dc4ff (.din(ldst_stbuf_reqvld_dc3), .dout(ldst_stbuf_reqvld_dc4), .clk(lsu_c2_dc4_clk), .*);
rvdff #(.WIDTH(1)) ldst_reqvld_dc5ff (.din(ldst_stbuf_reqvld_dc4), .dout(ldst_stbuf_reqvld_dc5), .clk(lsu_c2_dc5_clk), .*);
// Store Buffer drain logic
assign stbuf_reqvld_flushed_any = stbuf_flush_vld[RdPtr];
assign stbuf_reqvld_any = stbuf_drain_vld[RdPtr];
assign stbuf_addr_in_pic_any = stbuf_addr_in_pic[RdPtr];
assign stbuf_addr_any[LSU_SB_BITS-1:0] = stbuf_addr[RdPtr][LSU_SB_BITS-1:0];
assign stbuf_byteen_any[BYTE_WIDTH-1:0] = stbuf_byteen[RdPtr][BYTE_WIDTH-1:0]; // Not needed as we always write all the bytes
assign stbuf_data_any[DATA_WIDTH-1:0] = stbuf_data[RdPtr][DATA_WIDTH-1:0];
// Update the RdPtr/WrPtr logic
// Need to revert the WrPtr for flush cases. Also revert the pipe WrPtrs
assign WrPtrEn = ldst_stbuf_reqvld_dc3;
assign NxtWrPtr[DEPTH_LOG2-1:0] = (ldst_stbuf_reqvld_dc3 & dual_stbuf_write_dc3) ? WrPtrPlus2[DEPTH_LOG2-1:0] : WrPtrPlus1[DEPTH_LOG2-1:0];
assign RdPtrEn = lsu_stbuf_commit_any | stbuf_reqvld_flushed_any;
assign NxtRdPtr[DEPTH_LOG2-1:0] = RdPtrPlus1[DEPTH_LOG2-1:0];
always_comb begin
//stbuf_numvld_any[3:0] = {3'b0,isldst_dc3} << ldst_dual_dc3; // Use isldst_dc3 for timing reason
stbuf_numvld_any[3:0] = '0;
for (int i=0; i<DEPTH; i++) begin
stbuf_numvld_any[3:0] += {3'b0, stbuf_data_vld[i]};
end
end
assign stbuf_specvld_dc1[1:0] = {1'b0,isldst_dc1} << (isldst_dc1 & ldst_dual_dc1); // Gate dual with isldst to avoid X propagation
assign stbuf_specvld_dc2[1:0] = {1'b0,dccm_ldst_dc2} << (dccm_ldst_dc2 & ldst_dual_dc2);
assign stbuf_specvld_dc3[1:0] = {1'b0,dccm_ldst_dc3} << (dccm_ldst_dc3 & ldst_dual_dc3);
assign stbuf_specvld_any[3:0] = stbuf_numvld_any[3:0] + {2'b0, stbuf_specvld_dc1[1:0]} + {2'b0, stbuf_specvld_dc2[1:0]} + {2'b0, stbuf_specvld_dc3[1:0]};
assign lsu_stbuf_full_any = (stbuf_specvld_any[3:0] > (DEPTH - 2));
assign lsu_stbuf_empty_any = (stbuf_numvld_any[3:0] == 4'b0);
assign lsu_stbuf_nodma_empty_any = ~(|(stbuf_data_vld[DEPTH-1:0] & ~stbuf_dma[DEPTH-1:0]));
assign lsu_load_ecc_stbuf_full_dc3 = load_stbuf_reqvld_dc3 & ~ldst_stbuf_reqvld_dc3;
assign stbuf_oneavl_any = (stbuf_numvld_any[3:0] < DEPTH);
assign stbuf_twoavl_any = (stbuf_numvld_any[3:0] < (DEPTH - 1));
// Load forwarding logic
assign cmpen_hi_dc2 = lsu_cmpen_dc2 & ldst_dual_dc2;
assign cmpaddr_hi_dc2[LSU_SB_BITS-1:$clog2(BYTE_WIDTH)] = end_addr_dc2[LSU_SB_BITS-1:$clog2(BYTE_WIDTH)];
assign cmpen_lo_dc2 = lsu_cmpen_dc2;
assign cmpaddr_lo_dc2[LSU_SB_BITS-1:$clog2(BYTE_WIDTH)] = lsu_addr_dc2[LSU_SB_BITS-1:$clog2(BYTE_WIDTH)];
assign jit_in_same_region = (addr_in_pic_dc2 & addr_in_pic_dc3) | (addr_in_dccm_dc2 & addr_in_dccm_dc3);
// JIT forwarding
assign stbuf_ldmatch_hi_hi = (end_addr_dc3[LSU_SB_BITS-1:$clog2(BYTE_WIDTH)] == cmpaddr_hi_dc2[LSU_SB_BITS-1:$clog2(BYTE_WIDTH)]) & ~(cmpen_hi_dc2 & lsu_pkt_dc2.dma & ~lsu_pkt_dc3.dma) & jit_in_same_region;
assign stbuf_ldmatch_hi_lo = (lsu_addr_dc3[LSU_SB_BITS-1:$clog2(BYTE_WIDTH)] == cmpaddr_hi_dc2[LSU_SB_BITS-1:$clog2(BYTE_WIDTH)]) & ~(cmpen_hi_dc2 & lsu_pkt_dc2.dma & ~lsu_pkt_dc3.dma) & jit_in_same_region;
assign stbuf_ldmatch_lo_hi = (end_addr_dc3[LSU_SB_BITS-1:$clog2(BYTE_WIDTH)] == cmpaddr_lo_dc2[LSU_SB_BITS-1:$clog2(BYTE_WIDTH)]) & ~(cmpen_lo_dc2 & lsu_pkt_dc2.dma & ~lsu_pkt_dc3.dma) & jit_in_same_region;
assign stbuf_ldmatch_lo_lo = (lsu_addr_dc3[LSU_SB_BITS-1:$clog2(BYTE_WIDTH)] == cmpaddr_lo_dc2[LSU_SB_BITS-1:$clog2(BYTE_WIDTH)]) & ~(cmpen_lo_dc2 & lsu_pkt_dc2.dma & ~lsu_pkt_dc3.dma) & jit_in_same_region;
for (genvar i=0; i<BYTE_WIDTH; i++) begin
assign stbuf_fwdbyteen_hi_hi[i] = stbuf_ldmatch_hi_hi & store_byteen_hi_dc3[i] & ldst_stbuf_reqvld_dc3 & dual_stbuf_write_dc3;
assign stbuf_fwdbyteen_hi_lo[i] = stbuf_ldmatch_hi_lo & store_byteen_lo_dc3[i] & ldst_stbuf_reqvld_dc3;
assign stbuf_fwdbyteen_lo_hi[i] = stbuf_ldmatch_lo_hi & store_byteen_hi_dc3[i] & ldst_stbuf_reqvld_dc3 & dual_stbuf_write_dc3;
assign stbuf_fwdbyteen_lo_lo[i] = stbuf_ldmatch_lo_lo & store_byteen_lo_dc3[i] & ldst_stbuf_reqvld_dc3;
assign stbuf_fwddata_hi_hi[(8*i)+7:(8*i)] = {8{stbuf_fwdbyteen_hi_hi[i]}} & store_ecc_datafn_hi_dc3[(8*i)+7:(8*i)];
assign stbuf_fwddata_hi_lo[(8*i)+7:(8*i)] = {8{stbuf_fwdbyteen_hi_lo[i]}} & store_ecc_datafn_lo_dc3[(8*i)+7:(8*i)];
assign stbuf_fwddata_lo_hi[(8*i)+7:(8*i)] = {8{stbuf_fwdbyteen_lo_hi[i]}} & store_ecc_datafn_hi_dc3[(8*i)+7:(8*i)];
assign stbuf_fwddata_lo_lo[(8*i)+7:(8*i)] = {8{stbuf_fwdbyteen_lo_lo[i]}} & store_ecc_datafn_lo_dc3[(8*i)+7:(8*i)];
end
always_comb begin: GenLdFwd
stbuf_fwdbyteen_hi_dc2[BYTE_WIDTH-1:0] = '0;
stbuf_fwdbyteen_lo_dc2[BYTE_WIDTH-1:0] = '0;
for (int i=0; i<DEPTH; i++) begin
stbuf_ldmatch_hi[i] = (stbuf_addr[i][LSU_SB_BITS-1:$clog2(BYTE_WIDTH)] == cmpaddr_hi_dc2[LSU_SB_BITS-1:$clog2(BYTE_WIDTH)]) &
(stbuf_drain_vld[i] | ~lsu_pkt_dc2.dma) & ~stbuf_flush_vld[i] & ((stbuf_addr_in_pic[i] & addr_in_pic_dc2) | (~stbuf_addr_in_pic[i] & addr_in_dccm_dc2));
stbuf_ldmatch_lo[i] = (stbuf_addr[i][LSU_SB_BITS-1:$clog2(BYTE_WIDTH)] == cmpaddr_lo_dc2[LSU_SB_BITS-1:$clog2(BYTE_WIDTH)]) &
(stbuf_drain_vld[i] | ~lsu_pkt_dc2.dma) & ~stbuf_flush_vld[i] & ((stbuf_addr_in_pic[i] & addr_in_pic_dc2) | (~stbuf_addr_in_pic[i] & addr_in_dccm_dc2));
for (int j=0; j<BYTE_WIDTH; j++) begin
stbuf_fwdbyteenvec_hi[i][j] = stbuf_ldmatch_hi[i] & stbuf_byteen[i][j] & stbuf_data_vld[i];
stbuf_fwdbyteen_hi_dc2[j] |= stbuf_fwdbyteenvec_hi[i][j];
stbuf_fwdbyteenvec_lo[i][j] = stbuf_ldmatch_lo[i] & stbuf_byteen[i][j] & stbuf_data_vld[i];
stbuf_fwdbyteen_lo_dc2[j] |= stbuf_fwdbyteenvec_lo[i][j];
end
end
end // block: GenLdFwd
for (genvar i=0; i<DEPTH; i++) begin
for (genvar j=0; j<BYTE_WIDTH; j++) begin
assign stbuf_fwddatavec_hi[i][(8*j)+7:(8*j)] = {8{stbuf_fwdbyteenvec_hi[i][j]}} & stbuf_data[i][(8*j)+7:(8*j)];
assign stbuf_fwddatavec_lo[i][(8*j)+7:(8*j)] = {8{stbuf_fwdbyteenvec_lo[i][j]}} & stbuf_data[i][(8*j)+7:(8*j)];
end
end
always_comb begin
stbuf_fwddata_hi_dc2[DATA_WIDTH-1:0] = '0;
stbuf_fwddata_lo_dc2[DATA_WIDTH-1:0] = '0;
for (int i=0; i<DEPTH; i++) begin
// Byte0
if (stbuf_fwdbyteenvec_hi[DEPTH_LOG2'(WrPtr[DEPTH_LOG2-1:0] + DEPTH_LOG2'(i))][0]) begin
stbuf_fwddata_hi_dc2[7:0] = stbuf_fwddatavec_hi[DEPTH_LOG2'(WrPtr[DEPTH_LOG2-1:0] + DEPTH_LOG2'(i))][7:0];
end
if (stbuf_fwdbyteenvec_lo[DEPTH_LOG2'(WrPtr[DEPTH_LOG2-1:0] + DEPTH_LOG2'(i))][0]) begin
stbuf_fwddata_lo_dc2[7:0] = stbuf_fwddatavec_lo[DEPTH_LOG2'(WrPtr[DEPTH_LOG2-1:0] + DEPTH_LOG2'(i))][7:0];
end
// Byte1
if (stbuf_fwdbyteenvec_hi[DEPTH_LOG2'(WrPtr[DEPTH_LOG2-1:0] + DEPTH_LOG2'(i))][1]) begin
stbuf_fwddata_hi_dc2[15:8] = stbuf_fwddatavec_hi[DEPTH_LOG2'(WrPtr[DEPTH_LOG2-1:0] + DEPTH_LOG2'(i))][15:8];
end
if (stbuf_fwdbyteenvec_lo[DEPTH_LOG2'(WrPtr[DEPTH_LOG2-1:0] + DEPTH_LOG2'(i))][1]) begin
stbuf_fwddata_lo_dc2[15:8] = stbuf_fwddatavec_lo[DEPTH_LOG2'(WrPtr[DEPTH_LOG2-1:0] + DEPTH_LOG2'(i))][15:8];
end
// Byte2
if (stbuf_fwdbyteenvec_hi[DEPTH_LOG2'(WrPtr[DEPTH_LOG2-1:0] + DEPTH_LOG2'(i))][2]) begin
stbuf_fwddata_hi_dc2[23:16] = stbuf_fwddatavec_hi[DEPTH_LOG2'(WrPtr[DEPTH_LOG2-1:0] + DEPTH_LOG2'(i))][23:16];
end
if (stbuf_fwdbyteenvec_lo[DEPTH_LOG2'(WrPtr[DEPTH_LOG2-1:0] + DEPTH_LOG2'(i))][2]) begin
stbuf_fwddata_lo_dc2[23:16] = stbuf_fwddatavec_lo[DEPTH_LOG2'(WrPtr[DEPTH_LOG2-1:0] + DEPTH_LOG2'(i))][23:16];
end
// Byte3
if (stbuf_fwdbyteenvec_hi[DEPTH_LOG2'(WrPtr[DEPTH_LOG2-1:0] + DEPTH_LOG2'(i))][3]) begin
stbuf_fwddata_hi_dc2[31:24] = stbuf_fwddatavec_hi[DEPTH_LOG2'(WrPtr[DEPTH_LOG2-1:0] + DEPTH_LOG2'(i))][31:24];
end
if (stbuf_fwdbyteenvec_lo[DEPTH_LOG2'(WrPtr[DEPTH_LOG2-1:0] + DEPTH_LOG2'(i))][3]) begin
stbuf_fwddata_lo_dc2[31:24] = stbuf_fwddatavec_lo[DEPTH_LOG2'(WrPtr[DEPTH_LOG2-1:0] + DEPTH_LOG2'(i))][31:24];
end
end
end
for (genvar i=0; i<BYTE_WIDTH; i++) begin
assign stbuf_fwdbyteen_hi_fn_dc2[i] = stbuf_fwdbyteen_hi_hi[i] | stbuf_fwdbyteen_hi_lo[i] | stbuf_fwdbyteen_hi_dc2[i];
assign stbuf_fwdbyteen_lo_fn_dc2[i] = stbuf_fwdbyteen_lo_hi[i] | stbuf_fwdbyteen_lo_lo[i] | stbuf_fwdbyteen_lo_dc2[i];
assign stbuf_fwddata_hi_fn_dc2[(8*i)+7:(8*i)] = (stbuf_fwdbyteen_hi_hi[i] | stbuf_fwdbyteen_hi_lo[i]) ?
(stbuf_fwddata_hi_hi[(8*i)+7:(8*i)] | stbuf_fwddata_hi_lo[(8*i)+7:(8*i)]) :
stbuf_fwddata_hi_dc2[(8*i)+7:(8*i)];
assign stbuf_fwddata_lo_fn_dc2[(8*i)+7:(8*i)] = (stbuf_fwdbyteen_lo_hi[i] | stbuf_fwdbyteen_lo_lo[i]) ?
(stbuf_fwddata_lo_hi[(8*i)+7:(8*i)] | stbuf_fwddata_lo_lo[(8*i)+7:(8*i)]) :
stbuf_fwddata_lo_dc2[(8*i)+7:(8*i)];
end
// Flops
rvdffs #(.WIDTH(DEPTH_LOG2)) WrPtrff (.din(NxtWrPtr[DEPTH_LOG2-1:0]), .dout(WrPtr[DEPTH_LOG2-1:0]), .en(WrPtrEn), .clk(lsu_stbuf_c1_clk), .*);
rvdffs #(.WIDTH(DEPTH_LOG2)) RdPtrff (.din(NxtRdPtr[DEPTH_LOG2-1:0]), .dout(RdPtr[DEPTH_LOG2-1:0]), .en(RdPtrEn), .clk(lsu_stbuf_c1_clk), .*);
rvdffe #(.WIDTH(DATA_WIDTH)) stbuf_fwddata_hi_dc3ff (.din(stbuf_fwddata_hi_fn_dc2[DATA_WIDTH-1:0]), .dout(stbuf_fwddata_hi_dc3[DATA_WIDTH-1:0]), .en(lsu_freeze_c1_dc3_clken), .*);
rvdffe #(.WIDTH(DATA_WIDTH)) stbuf_fwddata_lo_dc3ff (.din(stbuf_fwddata_lo_fn_dc2[DATA_WIDTH-1:0]), .dout(stbuf_fwddata_lo_dc3[DATA_WIDTH-1:0]), .en(lsu_freeze_c1_dc3_clken), .*);
`ifdef ASSERT_ON
assert_drainorflushvld_notvld: assert #0 (~(|((stbuf_drain_vld[DEPTH-1:0] | stbuf_flush_vld[DEPTH-1:0]) & ~stbuf_data_vld[DEPTH-1:0])));
assert_drainAndflushvld: assert #0 (~(|(stbuf_drain_vld[DEPTH-1:0] & stbuf_flush_vld[DEPTH-1:0])));
assert_stbufempty: assert #0 (~lsu_stbuf_empty_any | lsu_stbuf_nodma_empty_any);
property ldecc_stbuffull_commit;
@(posedge clk) disable iff(~rst_l) (load_stbuf_reqvld_dc3 & lsu_load_ecc_stbuf_full_dc3) |-> ##2 (lsu_commit_dc5 == 1'b0);
endproperty
assert_ldecc_stbuffull_commit: assert property (ldecc_stbuffull_commit) else
$display("load with ecc error committed with store buffer full");
`endif
endmodule