92 lines
4.0 KiB
Verilog
92 lines
4.0 KiB
Verilog
// SPDX-License-Identifier: Apache-2.0
|
|
// Copyright 2019 Western Digital Corporation or its affiliates.
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
//
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
//------------------------------------------------------------------------------------
|
|
//
|
|
// Copyright Western Digital, 2019
|
|
// Owner : Anusha Narayanamoorthy
|
|
// Description:
|
|
// Wrapper module for JTAG_TAP and DMI synchronizer
|
|
//
|
|
//-------------------------------------------------------------------------------------
|
|
|
|
module dmi_wrapper(
|
|
input scan_mode, // scan mode
|
|
|
|
// JTAG signals
|
|
input trst_n, // JTAG reset
|
|
input tck, // JTAG clock
|
|
input tms, // Test mode select
|
|
input tdi, // Test Data Input
|
|
output tdo, // Test Data Output
|
|
output tdoEnable, // Test Data Output enable
|
|
|
|
// Processor Signals
|
|
input core_rst_n, // Core reset
|
|
input core_clk, // Core clock
|
|
input [31:1] jtag_id, // JTAG ID
|
|
input [31:0] rd_data, // 32 bit Read data from Processor
|
|
output [31:0] reg_wr_data, // 32 bit Write data to Processor
|
|
output [6:0] reg_wr_addr, // 7 bit reg address to Processor
|
|
output reg_en, // 1 bit Read enable to Processor
|
|
output reg_wr_en, // 1 bit Write enable to Processor
|
|
output dmi_hard_reset
|
|
);
|
|
|
|
|
|
|
|
|
|
|
|
//Wire Declaration
|
|
wire rd_en;
|
|
wire wr_en;
|
|
wire dmireset;
|
|
|
|
|
|
//jtag_tap instantiation
|
|
rvjtag_tap i_jtag_tap(
|
|
.trst(trst_n), // dedicated JTAG TRST (active low) pad signal or asynchronous active low power on reset
|
|
.tck(tck), // dedicated JTAG TCK pad signal
|
|
.tms(tms), // dedicated JTAG TMS pad signal
|
|
.tdi(tdi), // dedicated JTAG TDI pad signal
|
|
.tdo(tdo), // dedicated JTAG TDO pad signal
|
|
.tdoEnable(tdoEnable), // enable for TDO pad
|
|
.wr_data(reg_wr_data), // 32 bit Write data
|
|
.wr_addr(reg_wr_addr), // 7 bit Write address
|
|
.rd_en(rd_en), // 1 bit read enable
|
|
.wr_en(wr_en), // 1 bit Write enable
|
|
.rd_data(rd_data), // 32 bit Read data
|
|
.rd_status(2'b0),
|
|
.idle(3'h0), // no need to wait to sample data
|
|
.dmi_stat(2'b0), // no need to wait or error possible
|
|
.version(4'h1), // debug spec 0.13 compliant
|
|
.jtag_id(jtag_id),
|
|
.dmi_hard_reset(dmi_hard_reset),
|
|
.dmi_reset(dmireset)
|
|
);
|
|
|
|
|
|
// dmi_jtag_to_core_sync instantiation
|
|
dmi_jtag_to_core_sync i_dmi_jtag_to_core_sync(
|
|
.wr_en(wr_en), // 1 bit Write enable
|
|
.rd_en(rd_en), // 1 bit Read enable
|
|
|
|
.rst_n(core_rst_n),
|
|
.clk(core_clk),
|
|
.reg_en(reg_en), // 1 bit Write interface bit
|
|
.reg_wr_en(reg_wr_en) // 1 bit Write enable
|
|
);
|
|
|
|
endmodule
|