colin
/
cores-swerv-el2
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
cores-swerv-el2/design/lsu/el2_lsu_stbuf.sv

352 lines
21 KiB
Systemverilog
Raw Normal View History

Initial checkin.
2020-01-23 06:22:50 +08:00
// SPDX-License-Identifier: Apache-2.0
Branch 1.3
2020-11-18 02:25:18 +08:00
// Copyright 2020 Western Digital Corporation or its affiliates.
Initial checkin.
2020-01-23 06:22:50 +08:00
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//********************************************************************************
// $Id$
//
//
// Owner:
// Function: Store Buffer
// Comments: Dual writes and single drain
//
//
// DC1 -> DC2 -> DC3 -> DC4 (Commit)
//
// //********************************************************************************
module el2_lsu_stbuf
import el2_pkg::*;
#(
`include "el2_param.vh"
)
(
Branch 1.3
2020-11-18 02:25:18 +08:00
input logic clk, // core clock
input logic rst_l, // reset
Initial checkin.
2020-01-23 06:22:50 +08:00
Branch 1.3
2020-11-18 02:25:18 +08:00
input logic lsu_stbuf_c1_clk, // stbuf clock
input logic lsu_free_c2_clk, // free clk
Initial checkin.
2020-01-23 06:22:50 +08:00
// Store Buffer input
Branch 1.3
2020-11-18 02:25:18 +08:00
input logic store_stbuf_reqvld_r, // core instruction goes to stbuf
input logic lsu_commit_r, // lsu commits
input logic dec_lsu_valid_raw_d, // Speculative decode valid
input logic [pt.DCCM_DATA_WIDTH-1:0] store_data_hi_r, // merged data from the dccm for stores. This is used for fwding
input logic [pt.DCCM_DATA_WIDTH-1:0] store_data_lo_r, // merged data from the dccm for stores. This is used for fwding
input logic [pt.DCCM_DATA_WIDTH-1:0] store_datafn_hi_r, // merged data from the dccm for stores
input logic [pt.DCCM_DATA_WIDTH-1:0] store_datafn_lo_r, // merged data from the dccm for stores
Initial checkin.
2020-01-23 06:22:50 +08:00
// Store Buffer output
output logic stbuf_reqvld_any, // stbuf is draining
output logic stbuf_reqvld_flushed_any, // Top entry is flushed
output logic [pt.LSU_SB_BITS-1:0] stbuf_addr_any, // address
output logic [pt.DCCM_DATA_WIDTH-1:0] stbuf_data_any, // stbuf data
input logic lsu_stbuf_commit_any, // pop the stbuf as it commite
output logic lsu_stbuf_full_any, // stbuf is full
output logic lsu_stbuf_empty_any, // stbuf is empty
output logic ldst_stbuf_reqvld_r, // needed for clocking
Branch 1.3
2020-11-18 02:25:18 +08:00
input logic [pt.LSU_SB_BITS-1:0] lsu_addr_d, // lsu address D-stage
input logic [31:0] lsu_addr_m, // lsu address M-stage
input logic [31:0] lsu_addr_r, // lsu address R-stage
Initial checkin.
2020-01-23 06:22:50 +08:00
Branch 1.3
2020-11-18 02:25:18 +08:00
input logic [pt.LSU_SB_BITS-1:0] end_addr_d, // lsu end address D-stage - needed to check unaligned
input logic [31:0] end_addr_m, // lsu end address M-stage - needed to check unaligned
input logic [31:0] end_addr_r, // lsu end address R-stage - needed to check unaligned
Initial checkin.
2020-01-23 06:22:50 +08:00
Branch 1.3
2020-11-18 02:25:18 +08:00
input logic ldst_dual_d, ldst_dual_m, ldst_dual_r,
input logic addr_in_dccm_m, // address is in dccm
input logic addr_in_dccm_r, // address is in dccm
Initial checkin.
2020-01-23 06:22:50 +08:00
// Forwarding signals
input logic lsu_cmpen_m, // needed for forwarding stbuf - load
Branch 1.3
2020-11-18 02:25:18 +08:00
input el2_lsu_pkt_t lsu_pkt_m, // LSU packet M-stage
input el2_lsu_pkt_t lsu_pkt_r, // LSU packet R-stage
Initial checkin.
2020-01-23 06:22:50 +08:00
Branch 1.3
2020-11-18 02:25:18 +08:00
output logic [pt.DCCM_DATA_WIDTH-1:0] stbuf_fwddata_hi_m, // stbuf data
output logic [pt.DCCM_DATA_WIDTH-1:0] stbuf_fwddata_lo_m, // stbuf data
output logic [pt.DCCM_BYTE_WIDTH-1:0] stbuf_fwdbyteen_hi_m, // stbuf data
output logic [pt.DCCM_BYTE_WIDTH-1:0] stbuf_fwdbyteen_lo_m, // stbuf data
Initial checkin.
2020-01-23 06:22:50 +08:00
Branch 1.3
2020-11-18 02:25:18 +08:00
input logic scan_mode // Scan mode
Initial checkin.
2020-01-23 06:22:50 +08:00
);
localparam DEPTH = pt.LSU_STBUF_DEPTH;
localparam DATA_WIDTH = pt.DCCM_DATA_WIDTH;
localparam BYTE_WIDTH = pt.DCCM_BYTE_WIDTH;
localparam DEPTH_LOG2 = $clog2(DEPTH);
// These are the fields in the store queue
logic [DEPTH-1:0] stbuf_vld;
logic [DEPTH-1:0] stbuf_dma_kill;
logic [DEPTH-1:0][pt.LSU_SB_BITS-1:0] stbuf_addr;
logic [DEPTH-1:0][BYTE_WIDTH-1:0] stbuf_byteen;
logic [DEPTH-1:0][DATA_WIDTH-1:0] stbuf_data;
logic [DEPTH-1:0] sel_lo;
logic [DEPTH-1:0] stbuf_wr_en;
logic [DEPTH-1:0] stbuf_dma_kill_en;
logic [DEPTH-1:0] stbuf_reset;
logic [DEPTH-1:0][pt.LSU_SB_BITS-1:0] stbuf_addrin;
logic [DEPTH-1:0][DATA_WIDTH-1:0] stbuf_datain;
logic [DEPTH-1:0][BYTE_WIDTH-1:0] stbuf_byteenin;
logic [7:0] store_byteen_ext_r;
logic [BYTE_WIDTH-1:0] store_byteen_hi_r;
logic [BYTE_WIDTH-1:0] store_byteen_lo_r;
logic WrPtrEn, RdPtrEn;
logic [DEPTH_LOG2-1:0] WrPtr, RdPtr;
logic [DEPTH_LOG2-1:0] NxtWrPtr, NxtRdPtr;
logic [DEPTH_LOG2-1:0] WrPtrPlus1, WrPtrPlus2, RdPtrPlus1;
logic dual_stbuf_write_r;
logic isdccmst_m, isdccmst_r;
logic [3:0] stbuf_numvld_any, stbuf_specvld_any;
Branch 1.3
2020-11-18 02:25:18 +08:00
logic [1:0] stbuf_specvld_m, stbuf_specvld_r;
Initial checkin.
2020-01-23 06:22:50 +08:00
logic [pt.LSU_SB_BITS-1:$clog2(BYTE_WIDTH)] cmpaddr_hi_m, cmpaddr_lo_m;
// variables to detect matching from the store queue
logic [DEPTH-1:0] stbuf_match_hi, stbuf_match_lo;
logic [DEPTH-1:0][BYTE_WIDTH-1:0] stbuf_fwdbyteenvec_hi, stbuf_fwdbyteenvec_lo;
logic [DATA_WIDTH-1:0] stbuf_fwddata_hi_pre_m, stbuf_fwddata_lo_pre_m;
logic [BYTE_WIDTH-1:0] stbuf_fwdbyteen_hi_pre_m, stbuf_fwdbyteen_lo_pre_m;
// logic to detect matching from the pipe - needed for store - load forwarding
logic [BYTE_WIDTH-1:0] ld_byte_rhit_lo_lo, ld_byte_rhit_hi_lo, ld_byte_rhit_lo_hi, ld_byte_rhit_hi_hi;
logic ld_addr_rhit_lo_lo, ld_addr_rhit_hi_lo, ld_addr_rhit_lo_hi, ld_addr_rhit_hi_hi;
logic [BYTE_WIDTH-1:0] ld_byte_hit_lo, ld_byte_rhit_lo;
logic [BYTE_WIDTH-1:0] ld_byte_hit_hi, ld_byte_rhit_hi;
logic [BYTE_WIDTH-1:0] ldst_byteen_hi_r;
logic [BYTE_WIDTH-1:0] ldst_byteen_lo_r;
// byte_en flowing down
logic [7:0] ldst_byteen_r;
logic [7:0] ldst_byteen_ext_r;
// fwd data through the pipe
logic [31:0] ld_fwddata_rpipe_lo;
logic [31:0] ld_fwddata_rpipe_hi;
// coalescing signals
logic [DEPTH-1:0] store_matchvec_lo_r, store_matchvec_hi_r;
logic store_coalesce_lo_r, store_coalesce_hi_r;
//----------------------------------------
// Logic starts here
//----------------------------------------
// Create high/low byte enables
assign store_byteen_ext_r[7:0] = ldst_byteen_r[7:0] << lsu_addr_r[1:0];
assign store_byteen_hi_r[BYTE_WIDTH-1:0] = store_byteen_ext_r[7:4] & {4{lsu_pkt_r.store}};
assign store_byteen_lo_r[BYTE_WIDTH-1:0] = store_byteen_ext_r[3:0] & {4{lsu_pkt_r.store}};
assign RdPtrPlus1[DEPTH_LOG2-1:0] = RdPtr[DEPTH_LOG2-1:0] + 1'b1;
assign WrPtrPlus1[DEPTH_LOG2-1:0] = WrPtr[DEPTH_LOG2-1:0] + 1'b1;
assign WrPtrPlus2[DEPTH_LOG2-1:0] = WrPtr[DEPTH_LOG2-1:0] + 2'b10;
// ecc error on both hi/lo
assign dual_stbuf_write_r = ldst_dual_r & store_stbuf_reqvld_r;
Branch 1.3
2020-11-18 02:25:18 +08:00
assign ldst_stbuf_reqvld_r = ((lsu_commit_r | lsu_pkt_r.dma) & store_stbuf_reqvld_r);
Initial checkin.
2020-01-23 06:22:50 +08:00
// Store Buffer coalescing
Branch 1.3
2020-11-18 02:25:18 +08:00
for (genvar i=0; i<DEPTH; i++) begin: FindMatchEntry
Initial checkin.
2020-01-23 06:22:50 +08:00
assign store_matchvec_lo_r[i] = (stbuf_addr[i][pt.LSU_SB_BITS-1:$clog2(BYTE_WIDTH)] == lsu_addr_r[pt.LSU_SB_BITS-1:$clog2(BYTE_WIDTH)]) & stbuf_vld[i] & ~stbuf_dma_kill[i] & ~stbuf_reset[i];
assign store_matchvec_hi_r[i] = (stbuf_addr[i][pt.LSU_SB_BITS-1:$clog2(BYTE_WIDTH)] == end_addr_r[pt.LSU_SB_BITS-1:$clog2(BYTE_WIDTH)]) & stbuf_vld[i] & ~stbuf_dma_kill[i] & dual_stbuf_write_r & ~stbuf_reset[i];
end: FindMatchEntry
assign store_coalesce_lo_r = |store_matchvec_lo_r[DEPTH-1:0];
assign store_coalesce_hi_r = |store_matchvec_hi_r[DEPTH-1:0];
Branch 1.3
2020-11-18 02:25:18 +08:00
if (pt.DCCM_ENABLE == 1) begin: Gen_dccm_enable
// Allocate new in this entry if :
// 1. wrptr, single allocate, lo did not coalesce
// 2. wrptr, double allocate, lo ^ hi coalesced
// 3. wrptr + 1, double alloacte, niether lo or hi coalesced
// Also update if there is a hi or a lo coalesce to this entry
// Store Buffer instantiation
for (genvar i=0; i<DEPTH; i++) begin: GenStBuf
assign stbuf_wr_en[i] = ldst_stbuf_reqvld_r & (
( (i == WrPtr[DEPTH_LOG2-1:0]) & ~store_coalesce_lo_r) | // Allocate : new Lo
( (i == WrPtr[DEPTH_LOG2-1:0]) & dual_stbuf_write_r & ~store_coalesce_hi_r) | // Allocate : only 1 new Write Either
( (i == WrPtrPlus1[DEPTH_LOG2-1:0]) & dual_stbuf_write_r & ~(store_coalesce_lo_r | store_coalesce_hi_r)) | // Allocate2 : 2 new so Write Hi
store_matchvec_lo_r[i] | store_matchvec_hi_r[i]); // Coalesced Write Lo or Hi
assign stbuf_reset[i] = (lsu_stbuf_commit_any | stbuf_reqvld_flushed_any) & (i == RdPtr[DEPTH_LOG2-1:0]);
// Mux select for start/end address
assign sel_lo[i] = ((~ldst_dual_r | store_stbuf_reqvld_r) & (i == WrPtr[DEPTH_LOG2-1:0]) & ~store_coalesce_lo_r) | // lo allocated new entry
store_matchvec_lo_r[i]; // lo coalesced in to this entry
assign stbuf_addrin[i][pt.LSU_SB_BITS-1:0] = sel_lo[i] ? lsu_addr_r[pt.LSU_SB_BITS-1:0] : end_addr_r[pt.LSU_SB_BITS-1:0];
assign stbuf_byteenin[i][BYTE_WIDTH-1:0] = sel_lo[i] ? (stbuf_byteen[i][BYTE_WIDTH-1:0] | store_byteen_lo_r[BYTE_WIDTH-1:0]) : (stbuf_byteen[i][BYTE_WIDTH-1:0] | store_byteen_hi_r[BYTE_WIDTH-1:0]);
assign stbuf_datain[i][7:0] = sel_lo[i] ? ((~stbuf_byteen[i][0] | store_byteen_lo_r[0]) ? store_datafn_lo_r[7:0] : stbuf_data[i][7:0]) :
((~stbuf_byteen[i][0] | store_byteen_hi_r[0]) ? store_datafn_hi_r[7:0] : stbuf_data[i][7:0]);
assign stbuf_datain[i][15:8] = sel_lo[i] ? ((~stbuf_byteen[i][1] | store_byteen_lo_r[1]) ? store_datafn_lo_r[15:8] : stbuf_data[i][15:8]) :
((~stbuf_byteen[i][1] | store_byteen_hi_r[1]) ? store_datafn_hi_r[15:8] : stbuf_data[i][15:8]);
assign stbuf_datain[i][23:16] = sel_lo[i] ? ((~stbuf_byteen[i][2] | store_byteen_lo_r[2]) ? store_datafn_lo_r[23:16] : stbuf_data[i][23:16]) :
((~stbuf_byteen[i][2] | store_byteen_hi_r[2]) ? store_datafn_hi_r[23:16] : stbuf_data[i][23:16]);
assign stbuf_datain[i][31:24] = sel_lo[i] ? ((~stbuf_byteen[i][3] | store_byteen_lo_r[3]) ? store_datafn_lo_r[31:24] : stbuf_data[i][31:24]) :
((~stbuf_byteen[i][3] | store_byteen_hi_r[3]) ? store_datafn_hi_r[31:24] : stbuf_data[i][31:24]);
rvdffsc #(.WIDTH(1)) stbuf_vldff (.din(1'b1), .dout(stbuf_vld[i]), .en(stbuf_wr_en[i]), .clear(stbuf_reset[i]), .clk(lsu_free_c2_clk), .*);
rvdffsc #(.WIDTH(1)) stbuf_killff (.din(1'b1), .dout(stbuf_dma_kill[i]), .en(stbuf_dma_kill_en[i]), .clear(stbuf_reset[i]), .clk(lsu_free_c2_clk), .*);
rvdffe #(.WIDTH(pt.LSU_SB_BITS)) stbuf_addrff (.din(stbuf_addrin[i][pt.LSU_SB_BITS-1:0]), .dout(stbuf_addr[i][pt.LSU_SB_BITS-1:0]), .en(stbuf_wr_en[i]), .*);
rvdffsc #(.WIDTH(BYTE_WIDTH)) stbuf_byteenff (.din(stbuf_byteenin[i][BYTE_WIDTH-1:0]), .dout(stbuf_byteen[i][BYTE_WIDTH-1:0]), .en(stbuf_wr_en[i]), .clear(stbuf_reset[i]), .clk(lsu_stbuf_c1_clk), .*);
rvdffe #(.WIDTH(DATA_WIDTH)) stbuf_dataff (.din(stbuf_datain[i][DATA_WIDTH-1:0]), .dout(stbuf_data[i][DATA_WIDTH-1:0]), .en(stbuf_wr_en[i]), .*);
end
end else begin: Gen_dccm_disable
assign stbuf_wr_en[DEPTH-1:0] = '0;
assign stbuf_reset[DEPTH-1:0] = '0;
assign stbuf_vld[DEPTH-1:0] = '0;
assign stbuf_dma_kill[DEPTH-1:0] = '0;
assign stbuf_addr[DEPTH-1:0] = '0;
assign stbuf_byteen[DEPTH-1:0] = '0;
assign stbuf_data[DEPTH-1:0] = '0;
Initial checkin.
2020-01-23 06:22:50 +08:00
end
// Store Buffer drain logic
assign stbuf_reqvld_flushed_any = stbuf_vld[RdPtr] & stbuf_dma_kill[RdPtr];
assign stbuf_reqvld_any = stbuf_vld[RdPtr] & ~stbuf_dma_kill[RdPtr] & ~(|stbuf_dma_kill_en[DEPTH-1:0]); // Don't drain if some kill bit is being set this cycle
assign stbuf_addr_any[pt.LSU_SB_BITS-1:0] = stbuf_addr[RdPtr][pt.LSU_SB_BITS-1:0];
assign stbuf_data_any[DATA_WIDTH-1:0] = stbuf_data[RdPtr][DATA_WIDTH-1:0];
// Update the RdPtr/WrPtr logic
// Need to revert the WrPtr for flush cases. Also revert the pipe WrPtrs
assign WrPtrEn = (ldst_stbuf_reqvld_r & ~dual_stbuf_write_r & ~(store_coalesce_hi_r | store_coalesce_lo_r)) | // writing 1 and did not coalesce
(ldst_stbuf_reqvld_r & dual_stbuf_write_r & ~(store_coalesce_hi_r & store_coalesce_lo_r)); // writing 2 and atleast 1 did not coalesce
assign NxtWrPtr[DEPTH_LOG2-1:0] = (ldst_stbuf_reqvld_r & dual_stbuf_write_r & ~(store_coalesce_hi_r | store_coalesce_lo_r)) ? WrPtrPlus2[DEPTH_LOG2-1:0] : WrPtrPlus1[DEPTH_LOG2-1:0];
assign RdPtrEn = lsu_stbuf_commit_any | stbuf_reqvld_flushed_any;
assign NxtRdPtr[DEPTH_LOG2-1:0] = RdPtrPlus1[DEPTH_LOG2-1:0];
always_comb begin
stbuf_numvld_any[3:0] = '0;
Branch 1.3
2020-11-18 02:25:18 +08:00
for (int i=0; i<DEPTH; i++) begin
Initial checkin.
2020-01-23 06:22:50 +08:00
stbuf_numvld_any[3:0] += {3'b0, stbuf_vld[i]};
end
end
// These go to store buffer to detect full
assign isdccmst_m = lsu_pkt_m.valid & lsu_pkt_m.store & addr_in_dccm_m & ~lsu_pkt_m.dma;
assign isdccmst_r = lsu_pkt_r.valid & lsu_pkt_r.store & addr_in_dccm_r & ~lsu_pkt_r.dma;
assign stbuf_specvld_m[1:0] = {1'b0,isdccmst_m} << (isdccmst_m & ldst_dual_m);
assign stbuf_specvld_r[1:0] = {1'b0,isdccmst_r} << (isdccmst_r & ldst_dual_r);
assign stbuf_specvld_any[3:0] = stbuf_numvld_any[3:0] + {2'b0, stbuf_specvld_m[1:0]} + {2'b0, stbuf_specvld_r[1:0]};
assign lsu_stbuf_full_any = (~ldst_dual_d & dec_lsu_valid_raw_d) ? (stbuf_specvld_any[3:0] >= DEPTH) : (stbuf_specvld_any[3:0] >= (DEPTH-1));
assign lsu_stbuf_empty_any = (stbuf_numvld_any[3:0] == 4'b0);
// Load forwarding logic from the store queue
assign cmpaddr_hi_m[pt.LSU_SB_BITS-1:$clog2(BYTE_WIDTH)] = end_addr_m[pt.LSU_SB_BITS-1:$clog2(BYTE_WIDTH)];
assign cmpaddr_lo_m[pt.LSU_SB_BITS-1:$clog2(BYTE_WIDTH)] = lsu_addr_m[pt.LSU_SB_BITS-1:$clog2(BYTE_WIDTH)];
always_comb begin: GenLdFwd
stbuf_fwdbyteen_hi_pre_m[BYTE_WIDTH-1:0] = '0;
stbuf_fwdbyteen_lo_pre_m[BYTE_WIDTH-1:0] = '0;
Branch 1.3
2020-11-18 02:25:18 +08:00
for (int i=0; i<DEPTH; i++) begin
Initial checkin.
2020-01-23 06:22:50 +08:00
stbuf_match_hi[i] = (stbuf_addr[i][pt.LSU_SB_BITS-1:$clog2(BYTE_WIDTH)] == cmpaddr_hi_m[pt.LSU_SB_BITS-1:$clog2(BYTE_WIDTH)]) & stbuf_vld[i] & ~stbuf_dma_kill[i] & addr_in_dccm_m;
stbuf_match_lo[i] = (stbuf_addr[i][pt.LSU_SB_BITS-1:$clog2(BYTE_WIDTH)] == cmpaddr_lo_m[pt.LSU_SB_BITS-1:$clog2(BYTE_WIDTH)]) & stbuf_vld[i] & ~stbuf_dma_kill[i] & addr_in_dccm_m;
// Kill the store buffer entry if there is a dma store since it already updated the dccm
stbuf_dma_kill_en[i] = (stbuf_match_hi[i] | stbuf_match_lo[i]) & lsu_pkt_m.valid & lsu_pkt_m.dma & lsu_pkt_m.store;
Branch 1.3
2020-11-18 02:25:18 +08:00
for (int j=0; j<BYTE_WIDTH; j++) begin
Initial checkin.
2020-01-23 06:22:50 +08:00
stbuf_fwdbyteenvec_hi[i][j] = stbuf_match_hi[i] & stbuf_byteen[i][j] & stbuf_vld[i];
stbuf_fwdbyteen_hi_pre_m[j] |= stbuf_fwdbyteenvec_hi[i][j];
stbuf_fwdbyteenvec_lo[i][j] = stbuf_match_lo[i] & stbuf_byteen[i][j] & stbuf_vld[i];
stbuf_fwdbyteen_lo_pre_m[j] |= stbuf_fwdbyteenvec_lo[i][j];
end
end
end // block: GenLdFwd
always_comb begin: GenLdData
stbuf_fwddata_hi_pre_m[31:0] = '0;
stbuf_fwddata_lo_pre_m[31:0] = '0;
Branch 1.3
2020-11-18 02:25:18 +08:00
for (int i=0; i<DEPTH; i++) begin
Initial checkin.
2020-01-23 06:22:50 +08:00
stbuf_fwddata_hi_pre_m[31:0] |= {32{stbuf_match_hi[i]}} & stbuf_data[i][31:0];
stbuf_fwddata_lo_pre_m[31:0] |= {32{stbuf_match_lo[i]}} & stbuf_data[i][31:0];
end
end // block: GenLdData
// Create Hi/Lo signals - needed for the pipe forwarding
assign ldst_byteen_r[7:0] = ({8{lsu_pkt_r.by}} & 8'b0000_0001) |
({8{lsu_pkt_r.half}} & 8'b0000_0011) |
({8{lsu_pkt_r.word}} & 8'b0000_1111) |
({8{lsu_pkt_r.dword}} & 8'b1111_1111);
assign ldst_byteen_ext_r[7:0] = ldst_byteen_r[7:0] << lsu_addr_r[1:0];
assign ldst_byteen_hi_r[3:0] = ldst_byteen_ext_r[7:4];
assign ldst_byteen_lo_r[3:0] = ldst_byteen_ext_r[3:0];
assign ld_addr_rhit_lo_lo = (lsu_addr_m[31:2] == lsu_addr_r[31:2]) & lsu_pkt_r.valid & lsu_pkt_r.store & ~lsu_pkt_r.dma;
assign ld_addr_rhit_lo_hi = (end_addr_m[31:2] == lsu_addr_r[31:2]) & lsu_pkt_r.valid & lsu_pkt_r.store & ~lsu_pkt_r.dma;
assign ld_addr_rhit_hi_lo = (lsu_addr_m[31:2] == end_addr_r[31:2]) & lsu_pkt_r.valid & lsu_pkt_r.store & ~lsu_pkt_r.dma & dual_stbuf_write_r;
assign ld_addr_rhit_hi_hi = (end_addr_m[31:2] == end_addr_r[31:2]) & lsu_pkt_r.valid & lsu_pkt_r.store & ~lsu_pkt_r.dma & dual_stbuf_write_r;
Branch 1.3
2020-11-18 02:25:18 +08:00
for (genvar i=0; i<BYTE_WIDTH; i++) begin
Initial checkin.
2020-01-23 06:22:50 +08:00
assign ld_byte_rhit_lo_lo[i] = ld_addr_rhit_lo_lo & ldst_byteen_lo_r[i];
assign ld_byte_rhit_lo_hi[i] = ld_addr_rhit_lo_hi & ldst_byteen_lo_r[i];
assign ld_byte_rhit_hi_lo[i] = ld_addr_rhit_hi_lo & ldst_byteen_hi_r[i];
assign ld_byte_rhit_hi_hi[i] = ld_addr_rhit_hi_hi & ldst_byteen_hi_r[i];
assign ld_byte_rhit_lo[i] = ld_byte_rhit_lo_lo[i] | ld_byte_rhit_hi_lo[i];
assign ld_byte_rhit_hi[i] = ld_byte_rhit_lo_hi[i] | ld_byte_rhit_hi_hi[i];
assign ld_fwddata_rpipe_lo[(8*i)+7:(8*i)] = ({8{ld_byte_rhit_lo_lo[i]}} & store_data_lo_r[(8*i)+7:(8*i)]) |
({8{ld_byte_rhit_hi_lo[i]}} & store_data_hi_r[(8*i)+7:(8*i)]);
assign ld_fwddata_rpipe_hi[(8*i)+7:(8*i)] = ({8{ld_byte_rhit_lo_hi[i]}} & store_data_lo_r[(8*i)+7:(8*i)]) |
({8{ld_byte_rhit_hi_hi[i]}} & store_data_hi_r[(8*i)+7:(8*i)]);
assign ld_byte_hit_lo[i] = ld_byte_rhit_lo_lo[i] | ld_byte_rhit_hi_lo[i];
assign ld_byte_hit_hi[i] = ld_byte_rhit_lo_hi[i] | ld_byte_rhit_hi_hi[i];
assign stbuf_fwdbyteen_hi_m[i] = ld_byte_hit_hi[i] | stbuf_fwdbyteen_hi_pre_m[i];
assign stbuf_fwdbyteen_lo_m[i] = ld_byte_hit_lo[i] | stbuf_fwdbyteen_lo_pre_m[i];
// // Pipe vs Store Queue priority
assign stbuf_fwddata_lo_m[(8*i)+7:(8*i)] = ld_byte_rhit_lo[i] ? ld_fwddata_rpipe_lo[(8*i)+7:(8*i)] : stbuf_fwddata_lo_pre_m[(8*i)+7:(8*i)];
// // Pipe vs Store Queue priority
assign stbuf_fwddata_hi_m[(8*i)+7:(8*i)] = ld_byte_rhit_hi[i] ? ld_fwddata_rpipe_hi[(8*i)+7:(8*i)] : stbuf_fwddata_hi_pre_m[(8*i)+7:(8*i)];
end
// Flops
rvdffs #(.WIDTH(DEPTH_LOG2)) WrPtrff (.din(NxtWrPtr[DEPTH_LOG2-1:0]), .dout(WrPtr[DEPTH_LOG2-1:0]), .en(WrPtrEn), .clk(lsu_stbuf_c1_clk), .*);
rvdffs #(.WIDTH(DEPTH_LOG2)) RdPtrff (.din(NxtRdPtr[DEPTH_LOG2-1:0]), .dout(RdPtr[DEPTH_LOG2-1:0]), .en(RdPtrEn), .clk(lsu_stbuf_c1_clk), .*);
Branch 1.3
2020-11-18 02:25:18 +08:00
`ifdef RV_ASSERT_ON
Initial checkin.
2020-01-23 06:22:50 +08:00
assert_stbuf_overflow: assert #0 (stbuf_specvld_any[2:0] <= DEPTH);
property stbuf_wren_store_dccm;
Branch 1.3
2020-11-18 02:25:18 +08:00
@(posedge clk) disable iff(~rst_l) (|stbuf_wr_en[DEPTH-1:0]) |-> (lsu_pkt_r.valid & lsu_pkt_r.store & addr_in_dccm_r);
Initial checkin.
2020-01-23 06:22:50 +08:00
endproperty
assert_stbuf_wren_store_dccm: assert property (stbuf_wren_store_dccm) else
$display("Illegal store buffer write");
`endif
endmodule