cores-swerv-el2/design/exu/el2_exu_alu_ctl.sv

598 lines
22 KiB
Systemverilog
Raw Normal View History

2020-01-23 06:22:50 +08:00
// SPDX-License-Identifier: Apache-2.0
2020-11-18 02:25:18 +08:00
// Copyright 2020 Western Digital Corporation or its affiliates.
2020-01-23 06:22:50 +08:00
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
module el2_exu_alu_ctl
import el2_pkg::*;
#(
`include "el2_param.vh"
)
(
input logic clk, // Top level clock
input logic rst_l, // Reset
input logic scan_mode, // Scan control
input logic flush_upper_x, // Branch flush from previous cycle
input logic flush_lower_r, // Master flush of entire pipeline
input logic enable, // Clock enable
input logic valid_in, // Valid
input el2_alu_pkt_t ap, // predecodes
2020-11-18 02:25:18 +08:00
input logic csr_ren_in, // CSR select
input logic [31:0] csr_rddata_in, // CSR data
2020-01-23 06:22:50 +08:00
input logic signed [31:0] a_in, // A operand
input logic [31:0] b_in, // B operand
input logic [31:1] pc_in, // for pc=pc+2,4 calculations
input el2_predict_pkt_t pp_in, // Predicted branch structure
input logic [12:1] brimm_in, // Branch offset
output logic [31:0] result_ff, // final result
output logic flush_upper_out, // Branch flush
output logic flush_final_out, // Branch flush or flush entire pipeline
output logic [31:1] flush_path_out, // Branch flush PC
output logic [31:1] pc_ff, // flopped PC
output logic pred_correct_out, // NPC control
output el2_predict_pkt_t predict_p_out // Predicted branch structure
);
2020-11-18 02:25:18 +08:00
logic [31:0] zba_a_in;
2020-01-23 06:22:50 +08:00
logic [31:0] aout;
logic cout,ov,neg;
logic [31:0] lout;
logic [31:0] sout;
logic sel_shift;
logic sel_adder;
logic slt_one;
logic actual_taken;
logic [31:1] pcout;
logic cond_mispredict;
logic target_mispredict;
logic eq, ne, lt, ge;
logic any_jal;
logic [1:0] newhist;
logic sel_pc;
logic [31:0] csr_write_data;
logic [31:0] result;
2020-11-18 02:25:18 +08:00
// *** Start - BitManip ***
// Zbb
logic ap_clz;
logic ap_ctz;
logic ap_pcnt;
logic ap_sext_b;
logic ap_sext_h;
logic ap_min;
logic ap_max;
logic ap_pack;
logic ap_packu;
logic ap_packh;
logic ap_rol;
logic ap_ror;
logic ap_rev;
logic ap_rev8;
logic ap_orc_b;
logic ap_orc16;
logic ap_zbb;
// Zbs
logic ap_sbset;
logic ap_sbclr;
logic ap_sbinv;
logic ap_sbext;
// Zbr
logic ap_slo;
logic ap_sro;
// Zba
logic ap_sh1add;
logic ap_sh2add;
logic ap_sh3add;
logic ap_zba;
if (pt.BITMANIP_ZBB == 1)
begin
assign ap_clz = ap.clz;
assign ap_ctz = ap.ctz;
assign ap_pcnt = ap.pcnt;
assign ap_sext_b = ap.sext_b;
assign ap_sext_h = ap.sext_h;
assign ap_min = ap.min;
assign ap_max = ap.max;
end
else
begin
assign ap_clz = 1'b0;
assign ap_ctz = 1'b0;
assign ap_pcnt = 1'b0;
assign ap_sext_b = 1'b0;
assign ap_sext_h = 1'b0;
assign ap_min = 1'b0;
assign ap_max = 1'b0;
end
if ( (pt.BITMANIP_ZBB == 1) | (pt.BITMANIP_ZBP == 1) )
begin
assign ap_pack = ap.pack;
assign ap_packu = ap.packu;
assign ap_packh = ap.packh;
assign ap_rol = ap.rol;
assign ap_ror = ap.ror;
assign ap_rev = ap.grev & (b_in[4:0] == 5'b11111);
assign ap_rev8 = ap.grev & (b_in[4:0] == 5'b11000);
assign ap_orc_b = ap.gorc & (b_in[4:0] == 5'b00111);
assign ap_orc16 = ap.gorc & (b_in[4:0] == 5'b10000);
assign ap_zbb = ap.zbb;
end
else
begin
assign ap_pack = 1'b0;
assign ap_packu = 1'b0;
assign ap_packh = 1'b0;
assign ap_rol = 1'b0;
assign ap_ror = 1'b0;
assign ap_rev = 1'b0;
assign ap_rev8 = 1'b0;
assign ap_orc_b = 1'b0;
assign ap_orc16 = 1'b0;
assign ap_zbb = 1'b0;
end
if (pt.BITMANIP_ZBS == 1)
begin
assign ap_sbset = ap.sbset;
assign ap_sbclr = ap.sbclr;
assign ap_sbinv = ap.sbinv;
assign ap_sbext = ap.sbext;
end
else
begin
assign ap_sbset = 1'b0;
assign ap_sbclr = 1'b0;
assign ap_sbinv = 1'b0;
assign ap_sbext = 1'b0;
end
if (pt.BITMANIP_ZBP == 1)
begin
assign ap_slo = ap.slo;
assign ap_sro = ap.sro;
end
else
begin
assign ap_slo = 1'b0;
assign ap_sro = 1'b0;
end
if (pt.BITMANIP_ZBA == 1)
begin
assign ap_sh1add = ap.sh1add;
assign ap_sh2add = ap.sh2add;
assign ap_sh3add = ap.sh3add;
assign ap_zba = ap.zba;
end
else
begin
assign ap_sh1add = 1'b0;
assign ap_sh2add = 1'b0;
assign ap_sh3add = 1'b0;
assign ap_zba = 1'b0;
end
// *** End - BitManip ***
rvdffpcie #(31) i_pc_ff (.*, .clk(clk), .en(enable), .din(pc_in[31:1]), .dout(pc_ff[31:1])); // any PC is run through here - doesn't have to be alu
rvdffe #(32) i_result_ff (.*, .clk(clk), .en(enable & valid_in), .din(result[31:0]), .dout(result_ff[31:0]));
2020-01-23 06:22:50 +08:00
// immediates are just muxed into rs2
// add => add=1;
// sub => add=1; sub=1;
// and => lctl=3
// or => lctl=2
// xor => lctl=1
// sll => sctl=3
// srl => sctl=2
// sra => sctl=1
// slt => slt
// lui => lctl=2; or x0, imm20 previously << 12
// auipc => add; add pc, imm20 previously << 12
// beq => bctl=4; add; add x0, pc, sext(offset[12:1])
// bne => bctl=3; add; add x0, pc, sext(offset[12:1])
// blt => bctl=2; add; add x0, pc, sext(offset[12:1])
// bge => bctl=1; add; add x0, pc, sext(offset[12:1])
// jal => rs1=pc {pc[31:1],1'b0}, rs2=sext(offset20:1]); rd=pc+[2,4]
// jalr => rs1=rs1, rs2=sext(offset20:1]); rd=pc+[2,4]
2020-11-18 02:25:18 +08:00
assign zba_a_in[31:0] = ( {32{ ap_sh1add}} & {a_in[30:0],1'b0} ) |
( {32{ ap_sh2add}} & {a_in[29:0],2'b0} ) |
( {32{ ap_sh3add}} & {a_in[28:0],3'b0} ) |
( {32{~ap_zba }} & a_in[31:0] );
2020-01-23 06:22:50 +08:00
logic [31:0] bm;
assign bm[31:0] = ( ap.sub ) ? ~b_in[31:0] : b_in[31:0];
2020-11-18 02:25:18 +08:00
assign {cout, aout[31:0]} = {1'b0, zba_a_in[31:0]} + {1'b0, bm[31:0]} + {32'b0, ap.sub};
2020-01-23 06:22:50 +08:00
assign ov = (~a_in[31] & ~bm[31] & aout[31]) |
( a_in[31] & bm[31] & ~aout[31] );
assign lt = (~ap.unsign & (neg ^ ov)) |
( ap.unsign & ~cout);
assign eq = (a_in[31:0] == b_in[31:0]);
assign ne = ~eq;
assign neg = aout[31];
assign ge = ~lt;
2020-11-18 02:25:18 +08:00
assign lout[31:0] = ( {32{csr_ren_in }} & csr_rddata_in[31:0] ) |
( {32{ap.land & ~ap_zbb}} & a_in[31:0] & b_in[31:0] ) |
( {32{ap.lor & ~ap_zbb}} & (a_in[31:0] | b_in[31:0]) ) |
( {32{ap.lxor & ~ap_zbb}} & (a_in[31:0] ^ b_in[31:0]) ) |
( {32{ap.land & ap_zbb}} & a_in[31:0] & ~b_in[31:0] ) |
( {32{ap.lor & ap_zbb}} & (a_in[31:0] | ~b_in[31:0]) ) |
( {32{ap.lxor & ap_zbb}} & (a_in[31:0] ^ ~b_in[31:0]) );
2020-01-23 06:22:50 +08:00
2020-11-18 02:25:18 +08:00
// * * * * * * * * * * * * * * * * * * BitManip : SLO,SRO * * * * * * * * * * * * * * * * * *
// * * * * * * * * * * * * * * * * * * BitManip : ROL,ROR * * * * * * * * * * * * * * * * * *
// * * * * * * * * * * * * * * * * * * BitManip : ZBEXT * * * * * * * * * * * * * * * * * *
logic [5:0] shift_amount;
logic [31:0] shift_mask;
logic [62:0] shift_extend;
logic [62:0] shift_long;
2020-01-23 06:22:50 +08:00
assign shift_amount[5:0] = ( { 6{ap.sll}} & (6'd32 - {1'b0,b_in[4:0]}) ) | // [5] unused
( { 6{ap.srl}} & {1'b0,b_in[4:0]} ) |
2020-11-18 02:25:18 +08:00
( { 6{ap.sra}} & {1'b0,b_in[4:0]} ) |
( { 6{ap_rol}} & (6'd32 - {1'b0,b_in[4:0]}) ) |
( { 6{ap_ror}} & {1'b0,b_in[4:0]} ) |
( { 6{ap_slo}} & (6'd32 - {1'b0,b_in[4:0]}) ) |
( { 6{ap_sro}} & {1'b0,b_in[4:0]} ) |
( { 6{ap_sbext}} & {1'b0,b_in[4:0]} );
2020-01-23 06:22:50 +08:00
2020-11-18 02:25:18 +08:00
assign shift_mask[31:0] = ( 32'hffffffff << ({5{ap.sll | ap_slo}} & b_in[4:0]) );
2020-01-23 06:22:50 +08:00
assign shift_extend[31:0] = a_in[31:0];
assign shift_extend[62:32] = ( {31{ap.sra}} & {31{a_in[31]}} ) |
2020-11-18 02:25:18 +08:00
( {31{ap.sll}} & a_in[30:0] ) |
( {31{ap_rol}} & a_in[30:0] ) |
( {31{ap_ror}} & a_in[30:0] ) |
( {31{ap_slo}} & a_in[30:0] ) |
( {31{ap_sro}} & {31{ 1'b1 }} );
2020-01-23 06:22:50 +08:00
assign shift_long[62:0] = ( shift_extend[62:0] >> shift_amount[4:0] ); // 62-32 unused
2020-11-18 02:25:18 +08:00
assign sout[31:0] = ( shift_long[31:0] & shift_mask[31:0] ) | ( {32{ap_slo}} & ~shift_mask[31:0] );
// * * * * * * * * * * * * * * * * * * BitManip : CLZ,CTZ * * * * * * * * * * * * * * * * * *
logic bitmanip_clz_ctz_sel;
logic [31:0] bitmanip_a_reverse_ff;
logic [31:0] bitmanip_lzd_in;
logic [5:0] bitmanip_dw_lzd_enc;
logic [5:0] bitmanip_clz_ctz_result;
assign bitmanip_clz_ctz_sel = ap_clz | ap_ctz;
assign bitmanip_a_reverse_ff[31:0] = {a_in[0], a_in[1], a_in[2], a_in[3], a_in[4], a_in[5], a_in[6], a_in[7],
a_in[8], a_in[9], a_in[10], a_in[11], a_in[12], a_in[13], a_in[14], a_in[15],
a_in[16], a_in[17], a_in[18], a_in[19], a_in[20], a_in[21], a_in[22], a_in[23],
a_in[24], a_in[25], a_in[26], a_in[27], a_in[28], a_in[29], a_in[30], a_in[31]};
assign bitmanip_lzd_in[31:0] = ( {32{ap_clz}} & a_in[31:0] ) |
( {32{ap_ctz}} & bitmanip_a_reverse_ff[31:0]);
logic [31:0] bitmanip_lzd_os;
integer i;
logic found;
always_comb
begin
bitmanip_lzd_os[31:0] = bitmanip_lzd_in[31:0];
bitmanip_dw_lzd_enc[5:0]= 6'b0;
found = 1'b0;
for (int i=0; i<32 && found==0; i++) begin
if (bitmanip_lzd_os[31] == 1'b0) begin
bitmanip_dw_lzd_enc[5:0]= bitmanip_dw_lzd_enc[5:0] + 6'b00_0001;
bitmanip_lzd_os[31:0] = bitmanip_lzd_os[31:0] << 1;
end
else
found=1'b1;
end
end
assign bitmanip_clz_ctz_result[5:0] = {6{bitmanip_clz_ctz_sel}} & {bitmanip_dw_lzd_enc[5],( {5{~bitmanip_dw_lzd_enc[5]}} & bitmanip_dw_lzd_enc[4:0] )};
// * * * * * * * * * * * * * * * * * * BitManip : PCNT * * * * * * * * * * * * * * * * * *
logic [5:0] bitmanip_pcnt;
logic [5:0] bitmanip_pcnt_result;
integer bitmanip_pcnt_i;
always_comb
begin
bitmanip_pcnt[5:0] = 6'b0;
for (bitmanip_pcnt_i=0; bitmanip_pcnt_i<32; bitmanip_pcnt_i++)
begin
bitmanip_pcnt[5:0] = bitmanip_pcnt[5:0] + {5'b0,a_in[bitmanip_pcnt_i]};
end // FOR bitmanip_pcnt_i
end // ALWAYS_COMB
assign bitmanip_pcnt_result[5:0] = {6{ap_pcnt}} & bitmanip_pcnt[5:0];
// * * * * * * * * * * * * * * * * * * BitManip : SEXT_B,SEXT_H * * * * * * * * * * * * * * * * *
logic [31:0] bitmanip_sext_result;
assign bitmanip_sext_result[31:0] = ( {32{ap_sext_b}} & { {24{a_in[7]}} ,a_in[7:0] } ) |
( {32{ap_sext_h}} & { {16{a_in[15]}},a_in[15:0] } );
// * * * * * * * * * * * * * * * * * * BitManip : MIN,MAX,MINU,MAXU * * * * * * * * * * * * * * *
logic bitmanip_minmax_sel;
logic [31:0] bitmanip_minmax_result;
assign bitmanip_minmax_sel = ap_min | ap_max;
logic bitmanip_minmax_sel_a;
assign bitmanip_minmax_sel_a = ge ^ ap_min;
assign bitmanip_minmax_result[31:0] = ({32{bitmanip_minmax_sel & bitmanip_minmax_sel_a}} & a_in[31:0]) |
({32{bitmanip_minmax_sel & ~bitmanip_minmax_sel_a}} & b_in[31:0]);
// * * * * * * * * * * * * * * * * * * BitManip : PACK, PACKU, PACKH * * * * * * * * * * * * * * *
logic [31:0] bitmanip_pack_result;
logic [31:0] bitmanip_packu_result;
logic [31:0] bitmanip_packh_result;
assign bitmanip_pack_result[31:0] = {32{ap_pack}} & {b_in[15:0], a_in[15:0]};
assign bitmanip_packu_result[31:0] = {32{ap_packu}} & {b_in[31:16],a_in[31:16]};
assign bitmanip_packh_result[31:0] = {32{ap_packh}} & {16'b0,b_in[7:0],a_in[7:0]};
// * * * * * * * * * * * * * * * * * * BitManip : REV, REV8, ORC_B * * * * * * * * * * * * * * * *
logic [31:0] bitmanip_rev_result;
logic [31:0] bitmanip_rev8_result;
logic [31:0] bitmanip_orc_b_result;
logic [31:0] bitmanip_orc16_result;
assign bitmanip_rev_result[31:0] = {32{ap_rev}} &
{a_in[00],a_in[01],a_in[02],a_in[03],a_in[04],a_in[05],a_in[06],a_in[07],
a_in[08],a_in[09],a_in[10],a_in[11],a_in[12],a_in[13],a_in[14],a_in[15],
a_in[16],a_in[17],a_in[18],a_in[19],a_in[20],a_in[21],a_in[22],a_in[23],
a_in[24],a_in[25],a_in[26],a_in[27],a_in[28],a_in[29],a_in[30],a_in[31]};
assign bitmanip_rev8_result[31:0] = {32{ap_rev8}} & {a_in[7:0],a_in[15:8],a_in[23:16],a_in[31:24]};
// uint32_t gorc32(uint32_t rs1, uint32_t rs2)
// {
// uint32_t x = rs1;
// int shamt = rs2 & 31; ORC.B ORC16
// if (shamt & 1) x |= ((x & 0x55555555) << 1) | ((x & 0xAAAAAAAA) >> 1); 1 0
// if (shamt & 2) x |= ((x & 0x33333333) << 2) | ((x & 0xCCCCCCCC) >> 2); 1 0
// if (shamt & 4) x |= ((x & 0x0F0F0F0F) << 4) | ((x & 0xF0F0F0F0) >> 4); 1 0
// if (shamt & 8) x |= ((x & 0x00FF00FF) << 8) | ((x & 0xFF00FF00) >> 8); 0 0
// if (shamt & 16) x |= ((x & 0x0000FFFF) << 16) | ((x & 0xFFFF0000) >> 16); 0 1
// return x;
// }
// BEFORE 31 , 30 , 29 , 28 , 27 , 26, 25, 24
// shamt[0] b = a31|a30,a31|a30,a29|a28,a29|a28, a27|a26,a27|a26,a25|a24,a25|a24
// shamt[1] c = b31|b29,b30|b28,b31|b29,b30|b28, b27|b25,b26|b24,b27|b25,b26|b24
// shamt[2] d = c31|c27,c30|c26,c29|c25,c28|c24, c31|c27,c30|c26,c29|c25,c28|c24
//
// Expand d31 = c31 | c27;
// = b31 | b29 | b27 | b25;
// = a31|a30 | a29|a28 | a27|a26 | a25|a24
assign bitmanip_orc_b_result[31:0] = {32{ap_orc_b}} & { {8{| a_in[31:24]}}, {8{| a_in[23:16]}}, {8{| a_in[15:8]}}, {8{| a_in[7:0]}} };
assign bitmanip_orc16_result[31:0] = {32{ap_orc16}} & { {a_in[31:16] | a_in[15:0]}, {a_in[31:16] | a_in[15:0]} };
// * * * * * * * * * * * * * * * * * * BitManip : ZBSET, ZBCLR, ZBINV * * * * * * * * * * * * * *
logic [31:0] bitmanip_sb_1hot;
logic [31:0] bitmanip_sb_data;
assign bitmanip_sb_1hot[31:0] = ( 32'h00000001 << b_in[4:0] );
assign bitmanip_sb_data[31:0] = ( {32{ap_sbset}} & ( a_in[31:0] | bitmanip_sb_1hot[31:0]) ) |
( {32{ap_sbclr}} & ( a_in[31:0] & ~bitmanip_sb_1hot[31:0]) ) |
( {32{ap_sbinv}} & ( a_in[31:0] ^ bitmanip_sb_1hot[31:0]) );
2020-01-23 06:22:50 +08:00
2020-11-18 02:25:18 +08:00
assign sel_shift = ap.sll | ap.srl | ap.sra | ap_slo | ap_sro | ap_rol | ap_ror;
assign sel_adder = (ap.add | ap.sub | ap_zba) & ~ap.slt & ~ap_min & ~ap_max;
2020-01-23 06:22:50 +08:00
assign sel_pc = ap.jal | pp_in.pcall | pp_in.pja | pp_in.pret;
assign csr_write_data[31:0]= (ap.csr_imm) ? b_in[31:0] : a_in[31:0];
assign slt_one = ap.slt & lt;
assign result[31:0] = lout[31:0] |
({32{sel_shift}} & sout[31:0] ) |
({32{sel_adder}} & aout[31:0] ) |
({32{sel_pc}} & {pcout[31:1],1'b0} ) |
({32{ap.csr_write}} & csr_write_data[31:0] ) |
2020-11-18 02:25:18 +08:00
{31'b0, slt_one} |
({32{ap_sbext}} & {31'b0, sout[0]} ) |
{26'b0, bitmanip_clz_ctz_result[5:0]} |
{26'b0, bitmanip_pcnt_result[5:0]} |
bitmanip_sext_result[31:0] |
bitmanip_minmax_result[31:0] |
bitmanip_pack_result[31:0] |
bitmanip_packu_result[31:0] |
bitmanip_packh_result[31:0] |
bitmanip_rev_result[31:0] |
bitmanip_rev8_result[31:0] |
bitmanip_orc_b_result[31:0] |
bitmanip_orc16_result[31:0] |
bitmanip_sb_data[31:0];
2020-01-23 06:22:50 +08:00
// *** branch handling ***
assign any_jal = ap.jal |
pp_in.pcall |
pp_in.pja |
pp_in.pret;
assign actual_taken = (ap.beq & eq) |
(ap.bne & ne) |
(ap.blt & lt) |
(ap.bge & ge) |
any_jal;
// for a conditional br pcout[] will be the opposite of the branch prediction
// for jal or pcall, it will be the link address pc+2 or pc+4
rvbradder ibradder (
.pc ( pc_in[31:1] ),
.offset ( brimm_in[12:1] ),
.dout ( pcout[31:1] ));
// pred_correct is for the npc logic
// pred_correct indicates not to use the flush_path
// for any_jal pred_correct==0
assign pred_correct_out = (valid_in & ap.predict_nt & ~actual_taken & ~any_jal) |
(valid_in & ap.predict_t & actual_taken & ~any_jal);
// for any_jal adder output is the flush path
assign flush_path_out[31:1]= (any_jal) ? aout[31:1] : pcout[31:1];
// pcall and pret are included here
assign cond_mispredict = (ap.predict_t & ~actual_taken) |
(ap.predict_nt & actual_taken);
// target mispredicts on ret's
assign target_mispredict = pp_in.pret & (pp_in.prett[31:1] != aout[31:1]);
assign flush_upper_out = (ap.jal | cond_mispredict | target_mispredict) & valid_in & ~flush_upper_x & ~flush_lower_r;
assign flush_final_out = ( (ap.jal | cond_mispredict | target_mispredict) & valid_in & ~flush_upper_x ) | flush_lower_r;
// .i 3
// .o 2
// .ilb hist[1] hist[0] taken
// .ob newhist[1] newhist[0]
// .type fd
//
// 00 0 01
// 01 0 01
// 10 0 00
// 11 0 10
// 00 1 10
// 01 1 00
// 10 1 11
// 11 1 11
assign newhist[1] = ( pp_in.hist[1] & pp_in.hist[0]) | (~pp_in.hist[0] & actual_taken);
assign newhist[0] = (~pp_in.hist[1] & ~actual_taken) | ( pp_in.hist[1] & actual_taken);
always_comb begin
predict_p_out = pp_in;
predict_p_out.misp = ~flush_upper_x & ~flush_lower_r & (cond_mispredict | target_mispredict);
predict_p_out.ataken = actual_taken;
predict_p_out.hist[1] = newhist[1];
predict_p_out.hist[0] = newhist[0];
end
endmodule // el2_exu_alu_ctl