// SPDX-License-Identifier: Apache-2.0 // Copyright 2020 Western Digital Corporation or its affiliates. // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. //******************************************************************************** // $Id$ // // // Owner: // Function: DCCM for LSU pipe // Comments: Single ported memory // // // DC1 -> DC2 -> DC3 -> DC4 (Commit) // // //******************************************************************************** module el2_lsu_dccm_ctl import el2_pkg::*; #( `include "el2_param.vh" ) ( input logic lsu_c2_m_clk, // clocks input logic lsu_c2_r_clk, // clocks input logic lsu_c1_r_clk, // clocks input logic lsu_store_c1_r_clk, // clocks input logic lsu_free_c2_clk, // clocks input logic clk_override, // Override non-functional clock gating input logic clk, // Clock only while core active. Through one clock header. For flops with second clock header built in. Connected to ACTIVE_L2CLK. input logic rst_l, // reset, active low input el2_lsu_pkt_t lsu_pkt_r,// lsu packets input el2_lsu_pkt_t lsu_pkt_m,// lsu packets input el2_lsu_pkt_t lsu_pkt_d,// lsu packets input logic addr_in_dccm_d, // address maps to dccm input logic addr_in_pic_d, // address maps to pic input logic addr_in_pic_m, // address maps to pic input logic addr_in_dccm_m, addr_in_dccm_r, // address in dccm per pipe stage input logic addr_in_pic_r, // address in pic per pipe stage input logic lsu_raw_fwd_lo_r, lsu_raw_fwd_hi_r, input logic lsu_commit_r, // lsu instruction in r commits input logic ldst_dual_m, ldst_dual_r,// load/store is unaligned at 32 bit boundary per pipe stage // lsu address down the pipe input logic [31:0] lsu_addr_d, input logic [pt.DCCM_BITS-1:0] lsu_addr_m, input logic [31:0] lsu_addr_r, // lsu address down the pipe - needed to check unaligned input logic [pt.DCCM_BITS-1:0] end_addr_d, input logic [pt.DCCM_BITS-1:0] end_addr_m, input logic [pt.DCCM_BITS-1:0] end_addr_r, input logic stbuf_reqvld_any, // write enable input logic [pt.LSU_SB_BITS-1:0] stbuf_addr_any, // stbuf address (aligned) input logic [pt.DCCM_DATA_WIDTH-1:0] stbuf_data_any, // the read out from stbuf input logic [pt.DCCM_ECC_WIDTH-1:0] stbuf_ecc_any, // the encoded data with ECC bits input logic [pt.DCCM_DATA_WIDTH-1:0] stbuf_fwddata_hi_m, // stbuf fowarding to load input logic [pt.DCCM_DATA_WIDTH-1:0] stbuf_fwddata_lo_m, // stbuf fowarding to load input logic [pt.DCCM_BYTE_WIDTH-1:0] stbuf_fwdbyteen_hi_m, // stbuf fowarding to load input logic [pt.DCCM_BYTE_WIDTH-1:0] stbuf_fwdbyteen_lo_m, // stbuf fowarding to load output logic [pt.DCCM_DATA_WIDTH-1:0] dccm_rdata_hi_r, // data from the dccm output logic [pt.DCCM_DATA_WIDTH-1:0] dccm_rdata_lo_r, // data from the dccm output logic [pt.DCCM_ECC_WIDTH-1:0] dccm_data_ecc_hi_r, // data from the dccm + ecc output logic [pt.DCCM_ECC_WIDTH-1:0] dccm_data_ecc_lo_r, output logic [pt.DCCM_DATA_WIDTH-1:0] lsu_ld_data_r, // right justified, ie load byte will have data at 7:0 output logic [pt.DCCM_DATA_WIDTH-1:0] lsu_ld_data_corr_r, // right justified & ECC corrected, ie load byte will have data at 7:0 input logic lsu_double_ecc_error_r, // lsu has a DED input logic single_ecc_error_hi_r, // sec detected on hi dccm bank input logic single_ecc_error_lo_r, // sec detected on lower dccm bank input logic [pt.DCCM_DATA_WIDTH-1:0] sec_data_hi_r, // corrected dccm data input logic [pt.DCCM_DATA_WIDTH-1:0] sec_data_lo_r, // corrected dccm data input logic [pt.DCCM_DATA_WIDTH-1:0] sec_data_hi_r_ff, // corrected dccm data input logic [pt.DCCM_DATA_WIDTH-1:0] sec_data_lo_r_ff, // corrected dccm data input logic [pt.DCCM_ECC_WIDTH-1:0] sec_data_ecc_hi_r_ff, // the encoded data with ECC bits input logic [pt.DCCM_ECC_WIDTH-1:0] sec_data_ecc_lo_r_ff, // the encoded data with ECC bits output logic [pt.DCCM_DATA_WIDTH-1:0] dccm_rdata_hi_m, // data from the dccm output logic [pt.DCCM_DATA_WIDTH-1:0] dccm_rdata_lo_m, // data from the dccm output logic [pt.DCCM_ECC_WIDTH-1:0] dccm_data_ecc_hi_m, // data from the dccm + ecc output logic [pt.DCCM_ECC_WIDTH-1:0] dccm_data_ecc_lo_m, output logic [pt.DCCM_DATA_WIDTH-1:0] lsu_ld_data_m, // right justified, ie load byte will have data at 7:0 input logic lsu_double_ecc_error_m, // lsu has a DED input logic [pt.DCCM_DATA_WIDTH-1:0] sec_data_hi_m, // corrected dccm data input logic [pt.DCCM_DATA_WIDTH-1:0] sec_data_lo_m, // corrected dccm data input logic [31:0] store_data_m, // Store data M-stage input logic dma_dccm_wen, // Perform DMA writes only for word/dword input logic dma_pic_wen, // Perform PIC writes input logic [2:0] dma_mem_tag_m, // DMA Buffer entry number M-stage input logic [31:0] dma_mem_addr, // DMA request address input logic [63:0] dma_mem_wdata, // DMA write data input logic [31:0] dma_dccm_wdata_lo, // Shift the dma data to lower bits to make it consistent to lsu stores input logic [31:0] dma_dccm_wdata_hi, // Shift the dma data to lower bits to make it consistent to lsu stores input logic [pt.DCCM_ECC_WIDTH-1:0] dma_dccm_wdata_ecc_hi, // ECC bits for the DMA wdata input logic [pt.DCCM_ECC_WIDTH-1:0] dma_dccm_wdata_ecc_lo, // ECC bits for the DMA wdata output logic [pt.DCCM_DATA_WIDTH-1:0] store_data_hi_r, output logic [pt.DCCM_DATA_WIDTH-1:0] store_data_lo_r, output logic [pt.DCCM_DATA_WIDTH-1:0] store_datafn_hi_r, // data from the dccm output logic [pt.DCCM_DATA_WIDTH-1:0] store_datafn_lo_r, // data from the dccm output logic [31:0] store_data_r, // raw store data to be sent to bus output logic ld_single_ecc_error_r, output logic ld_single_ecc_error_r_ff, output logic [31:0] picm_mask_data_m, // pic data to stbuf output logic lsu_stbuf_commit_any, // stbuf wins the dccm port or is to pic output logic lsu_dccm_rden_m, // dccm read output logic lsu_dccm_rden_r, // dccm read output logic dccm_dma_rvalid, // dccm serviving the dma load output logic dccm_dma_ecc_error, // DMA load had ecc error output logic [2:0] dccm_dma_rtag, // DMA return tag output logic [63:0] dccm_dma_rdata, // dccm data to dma request // DCCM ports output logic dccm_wren, // dccm interface -- write output logic dccm_rden, // dccm interface -- write output logic [pt.DCCM_BITS-1:0] dccm_wr_addr_lo, // dccm interface -- wr addr for lo bank output logic [pt.DCCM_BITS-1:0] dccm_wr_addr_hi, // dccm interface -- wr addr for hi bank output logic [pt.DCCM_BITS-1:0] dccm_rd_addr_lo, // dccm interface -- read address for lo bank output logic [pt.DCCM_BITS-1:0] dccm_rd_addr_hi, // dccm interface -- read address for hi bank output logic [pt.DCCM_FDATA_WIDTH-1:0] dccm_wr_data_lo, // dccm write data for lo bank output logic [pt.DCCM_FDATA_WIDTH-1:0] dccm_wr_data_hi, // dccm write data for hi bank input logic [pt.DCCM_FDATA_WIDTH-1:0] dccm_rd_data_lo, // dccm read data back from the dccm input logic [pt.DCCM_FDATA_WIDTH-1:0] dccm_rd_data_hi, // dccm read data back from the dccm // PIC ports output logic picm_wren, // write to pic output logic picm_rden, // read to pick output logic picm_mken, // write to pic need a mask output logic [31:0] picm_rdaddr, // address for pic read access output logic [31:0] picm_wraddr, // address for pic write access output logic [31:0] picm_wr_data, // write data input logic [31:0] picm_rd_data, // read data input logic scan_mode // scan mode ); localparam DCCM_WIDTH_BITS = $clog2(pt.DCCM_BYTE_WIDTH); logic lsu_dccm_rden_d, lsu_dccm_wren_d; logic ld_single_ecc_error_lo_r, ld_single_ecc_error_hi_r; logic ld_single_ecc_error_lo_r_ns, ld_single_ecc_error_hi_r_ns; logic ld_single_ecc_error_lo_r_ff, ld_single_ecc_error_hi_r_ff; logic lsu_double_ecc_error_r_ff; logic [pt.DCCM_BITS-1:0] ld_sec_addr_lo_r_ff, ld_sec_addr_hi_r_ff; logic [pt.DCCM_DATA_WIDTH-1:0] store_data_lo_r_in, store_data_hi_r_in ; logic [63:0] picm_rd_data_m; logic dccm_wr_bypass_d_m_hi, dccm_wr_bypass_d_r_hi; logic dccm_wr_bypass_d_m_lo, dccm_wr_bypass_d_r_lo; logic kill_ecc_corr_lo_r, kill_ecc_corr_hi_r; // byte_en flowing down logic [3:0] store_byteen_m ,store_byteen_r; logic [7:0] store_byteen_ext_m, store_byteen_ext_r; if (pt.LOAD_TO_USE_PLUS1 == 1) begin: L2U_Plus1_1 logic [63:0] lsu_rdata_r, lsu_rdata_corr_r; logic [63:0] dccm_rdata_r, dccm_rdata_corr_r; logic [63:0] stbuf_fwddata_r; logic [7:0] stbuf_fwdbyteen_r; logic [31:0] stbuf_fwddata_lo_r, stbuf_fwddata_hi_r; logic [3:0] stbuf_fwdbyteen_lo_r, stbuf_fwdbyteen_hi_r; logic [31:0] lsu_rdata_lo_r, lsu_rdata_hi_r; logic [63:0] picm_rd_data_r; logic [63:32] lsu_ld_data_r_nc, lsu_ld_data_corr_r_nc; logic [2:0] dma_mem_tag_r; logic stbuf_fwddata_en; assign dccm_dma_rvalid = lsu_pkt_r.valid & lsu_pkt_r.load & lsu_pkt_r.dma; assign dccm_dma_ecc_error = lsu_double_ecc_error_r; assign dccm_dma_rtag[2:0] = dma_mem_tag_r[2:0]; assign dccm_dma_rdata[63:0] = ldst_dual_r ? lsu_rdata_corr_r[63:0] : {2{lsu_rdata_corr_r[31:0]}}; assign {lsu_ld_data_r_nc[63:32], lsu_ld_data_r[31:0]} = lsu_rdata_r[63:0] >> 8*lsu_addr_r[1:0]; assign {lsu_ld_data_corr_r_nc[63:32], lsu_ld_data_corr_r[31:0]} = lsu_rdata_corr_r[63:0] >> 8*lsu_addr_r[1:0]; assign picm_rd_data_r[63:32] = picm_rd_data_r[31:0]; assign dccm_rdata_r[63:0] = {dccm_rdata_hi_r[31:0],dccm_rdata_lo_r[31:0]}; assign dccm_rdata_corr_r[63:0] = {sec_data_hi_r[31:0],sec_data_lo_r[31:0]}; assign stbuf_fwddata_r[63:0] = {stbuf_fwddata_hi_r[31:0], stbuf_fwddata_lo_r[31:0]}; assign stbuf_fwdbyteen_r[7:0] = {stbuf_fwdbyteen_hi_r[3:0], stbuf_fwdbyteen_lo_r[3:0]}; assign stbuf_fwddata_en = (|stbuf_fwdbyteen_hi_m[3:0]) | (|stbuf_fwdbyteen_lo_m[3:0]) | clk_override; for (genvar i=0; i<8; i++) begin: GenDMAData assign lsu_rdata_corr_r[(8*i)+7:8*i] = stbuf_fwdbyteen_r[i] ? stbuf_fwddata_r[(8*i)+7:8*i] : (addr_in_pic_r ? picm_rd_data_r[(8*i)+7:8*i] : ({8{addr_in_dccm_r}} & dccm_rdata_corr_r[(8*i)+7:8*i])); assign lsu_rdata_r[(8*i)+7:8*i] = stbuf_fwdbyteen_r[i] ? stbuf_fwddata_r[(8*i)+7:8*i] : (addr_in_pic_r ? picm_rd_data_r[(8*i)+7:8*i] : ({8{addr_in_dccm_r}} & dccm_rdata_r[(8*i)+7:8*i])); end rvdffe #(pt.DCCM_DATA_WIDTH) dccm_rdata_hi_r_ff (.*, .din(dccm_rdata_hi_m[pt.DCCM_DATA_WIDTH-1:0]), .dout(dccm_rdata_hi_r[pt.DCCM_DATA_WIDTH-1:0]), .en((lsu_dccm_rden_m & ldst_dual_m) | clk_override)); rvdffe #(pt.DCCM_DATA_WIDTH) dccm_rdata_lo_r_ff (.*, .din(dccm_rdata_lo_m[pt.DCCM_DATA_WIDTH-1:0]), .dout(dccm_rdata_lo_r[pt.DCCM_DATA_WIDTH-1:0]), .en(lsu_dccm_rden_m | clk_override)); rvdffe #(2*pt.DCCM_ECC_WIDTH) dccm_data_ecc_r_ff (.*, .din({dccm_data_ecc_hi_m[pt.DCCM_ECC_WIDTH-1:0], dccm_data_ecc_lo_m[pt.DCCM_ECC_WIDTH-1:0]}), .dout({dccm_data_ecc_hi_r[pt.DCCM_ECC_WIDTH-1:0], dccm_data_ecc_lo_r[pt.DCCM_ECC_WIDTH-1:0]}), .en(lsu_dccm_rden_m | clk_override)); rvdff #(8) stbuf_fwdbyteen_ff (.*, .din({stbuf_fwdbyteen_hi_m[3:0], stbuf_fwdbyteen_lo_m[3:0]}), .dout({stbuf_fwdbyteen_hi_r[3:0], stbuf_fwdbyteen_lo_r[3:0]}), .clk(lsu_c2_r_clk)); rvdffe #(64) stbuf_fwddata_ff (.*, .din({stbuf_fwddata_hi_m[31:0], stbuf_fwddata_lo_m[31:0]}), .dout({stbuf_fwddata_hi_r[31:0], stbuf_fwddata_lo_r[31:0]}), .en(stbuf_fwddata_en)); rvdffe #(32) picm_rddata_rff (.*, .din(picm_rd_data_m[31:0]), .dout(picm_rd_data_r[31:0]), .en(addr_in_pic_m | clk_override)); rvdff #(3) dma_mem_tag_rff (.*, .din(dma_mem_tag_m[2:0]), .dout(dma_mem_tag_r[2:0]), .clk(lsu_c1_r_clk)); end else begin: L2U_Plus1_0 logic [63:0] lsu_rdata_m, lsu_rdata_corr_m; logic [63:0] dccm_rdata_m, dccm_rdata_corr_m; logic [63:0] stbuf_fwddata_m; logic [7:0] stbuf_fwdbyteen_m; logic [63:32] lsu_ld_data_m_nc, lsu_ld_data_corr_m_nc; logic [31:0] lsu_ld_data_corr_m; assign dccm_dma_rvalid = lsu_pkt_m.valid & lsu_pkt_m.load & lsu_pkt_m.dma; assign dccm_dma_ecc_error = lsu_double_ecc_error_m; assign dccm_dma_rtag[2:0] = dma_mem_tag_m[2:0]; assign dccm_dma_rdata[63:0] = ldst_dual_m ? lsu_rdata_corr_m[63:0] : {2{lsu_rdata_corr_m[31:0]}}; assign {lsu_ld_data_m_nc[63:32], lsu_ld_data_m[31:0]} = lsu_rdata_m[63:0] >> 8*lsu_addr_m[1:0]; assign {lsu_ld_data_corr_m_nc[63:32], lsu_ld_data_corr_m[31:0]} = lsu_rdata_corr_m[63:0] >> 8*lsu_addr_m[1:0]; assign dccm_rdata_m[63:0] = {dccm_rdata_hi_m[31:0],dccm_rdata_lo_m[31:0]}; assign dccm_rdata_corr_m[63:0] = {sec_data_hi_m[31:0],sec_data_lo_m[31:0]}; assign stbuf_fwddata_m[63:0] = {stbuf_fwddata_hi_m[31:0], stbuf_fwddata_lo_m[31:0]}; assign stbuf_fwdbyteen_m[7:0] = {stbuf_fwdbyteen_hi_m[3:0], stbuf_fwdbyteen_lo_m[3:0]}; for (genvar i=0; i<8; i++) begin: GenLoop assign lsu_rdata_corr_m[(8*i)+7:8*i] = stbuf_fwdbyteen_m[i] ? stbuf_fwddata_m[(8*i)+7:8*i] : (addr_in_pic_m ? picm_rd_data_m[(8*i)+7:8*i] : ({8{addr_in_dccm_m}} & dccm_rdata_corr_m[(8*i)+7:8*i])); assign lsu_rdata_m[(8*i)+7:8*i] = stbuf_fwdbyteen_m[i] ? stbuf_fwddata_m[(8*i)+7:8*i] : (addr_in_pic_m ? picm_rd_data_m[(8*i)+7:8*i] : ({8{addr_in_dccm_m}} & dccm_rdata_m[(8*i)+7:8*i])); end rvdffe #(32) lsu_ld_data_corr_rff(.*, .din(lsu_ld_data_corr_m[31:0]), .dout(lsu_ld_data_corr_r[31:0]), .en((lsu_pkt_m.valid & lsu_pkt_m.load & (addr_in_pic_m | addr_in_dccm_m)) | clk_override)); end assign kill_ecc_corr_lo_r = (((lsu_addr_d[pt.DCCM_BITS-1:2] == lsu_addr_r[pt.DCCM_BITS-1:2]) | (end_addr_d[pt.DCCM_BITS-1:2] == lsu_addr_r[pt.DCCM_BITS-1:2])) & lsu_pkt_d.valid & lsu_pkt_d.store & lsu_pkt_d.dma & addr_in_dccm_d) | (((lsu_addr_m[pt.DCCM_BITS-1:2] == lsu_addr_r[pt.DCCM_BITS-1:2]) | (end_addr_m[pt.DCCM_BITS-1:2] == lsu_addr_r[pt.DCCM_BITS-1:2])) & lsu_pkt_m.valid & lsu_pkt_m.store & lsu_pkt_m.dma & addr_in_dccm_m); assign kill_ecc_corr_hi_r = (((lsu_addr_d[pt.DCCM_BITS-1:2] == end_addr_r[pt.DCCM_BITS-1:2]) | (end_addr_d[pt.DCCM_BITS-1:2] == end_addr_r[pt.DCCM_BITS-1:2])) & lsu_pkt_d.valid & lsu_pkt_d.store & lsu_pkt_d.dma & addr_in_dccm_d) | (((lsu_addr_m[pt.DCCM_BITS-1:2] == end_addr_r[pt.DCCM_BITS-1:2]) | (end_addr_m[pt.DCCM_BITS-1:2] == end_addr_r[pt.DCCM_BITS-1:2])) & lsu_pkt_m.valid & lsu_pkt_m.store & lsu_pkt_m.dma & addr_in_dccm_m); assign ld_single_ecc_error_lo_r = lsu_pkt_r.load & single_ecc_error_lo_r & ~lsu_raw_fwd_lo_r; assign ld_single_ecc_error_hi_r = lsu_pkt_r.load & single_ecc_error_hi_r & ~lsu_raw_fwd_hi_r; assign ld_single_ecc_error_r = (ld_single_ecc_error_lo_r | ld_single_ecc_error_hi_r) & ~lsu_double_ecc_error_r; assign ld_single_ecc_error_lo_r_ns = ld_single_ecc_error_lo_r & (lsu_commit_r | lsu_pkt_r.dma) & ~kill_ecc_corr_lo_r; assign ld_single_ecc_error_hi_r_ns = ld_single_ecc_error_hi_r & (lsu_commit_r | lsu_pkt_r.dma) & ~kill_ecc_corr_hi_r; assign ld_single_ecc_error_r_ff = (ld_single_ecc_error_lo_r_ff | ld_single_ecc_error_hi_r_ff) & ~lsu_double_ecc_error_r_ff; assign lsu_stbuf_commit_any = stbuf_reqvld_any & (~(lsu_dccm_rden_d | lsu_dccm_wren_d | ld_single_ecc_error_r_ff) | (lsu_dccm_rden_d & ~((stbuf_addr_any[pt.DCCM_WIDTH_BITS+:pt.DCCM_BANK_BITS] == lsu_addr_d[pt.DCCM_WIDTH_BITS+:pt.DCCM_BANK_BITS]) | (stbuf_addr_any[pt.DCCM_WIDTH_BITS+:pt.DCCM_BANK_BITS] == end_addr_d[pt.DCCM_WIDTH_BITS+:pt.DCCM_BANK_BITS])))); // No need to read for aligned word/dword stores since ECC will come by new data completely assign lsu_dccm_rden_d = lsu_pkt_d.valid & (lsu_pkt_d.load | (lsu_pkt_d.store & (~(lsu_pkt_d.word | lsu_pkt_d.dword) | (lsu_addr_d[1:0] != 2'b0)))) & addr_in_dccm_d; // DMA will read/write in decode stage assign lsu_dccm_wren_d = dma_dccm_wen; // DCCM inputs assign dccm_wren = lsu_dccm_wren_d | lsu_stbuf_commit_any | ld_single_ecc_error_r_ff; assign dccm_rden = lsu_dccm_rden_d & addr_in_dccm_d; assign dccm_wr_addr_lo[pt.DCCM_BITS-1:0] = ld_single_ecc_error_r_ff ? (ld_single_ecc_error_lo_r_ff ? ld_sec_addr_lo_r_ff[pt.DCCM_BITS-1:0] : ld_sec_addr_hi_r_ff[pt.DCCM_BITS-1:0]) : lsu_dccm_wren_d ? lsu_addr_d[pt.DCCM_BITS-1:0] : stbuf_addr_any[pt.DCCM_BITS-1:0]; assign dccm_wr_addr_hi[pt.DCCM_BITS-1:0] = ld_single_ecc_error_r_ff ? (ld_single_ecc_error_hi_r_ff ? ld_sec_addr_hi_r_ff[pt.DCCM_BITS-1:0] : ld_sec_addr_lo_r_ff[pt.DCCM_BITS-1:0]) : lsu_dccm_wren_d ? end_addr_d[pt.DCCM_BITS-1:0] : stbuf_addr_any[pt.DCCM_BITS-1:0]; assign dccm_rd_addr_lo[pt.DCCM_BITS-1:0] = lsu_addr_d[pt.DCCM_BITS-1:0]; assign dccm_rd_addr_hi[pt.DCCM_BITS-1:0] = end_addr_d[pt.DCCM_BITS-1:0]; assign dccm_wr_data_lo[pt.DCCM_FDATA_WIDTH-1:0] = ld_single_ecc_error_r_ff ? (ld_single_ecc_error_lo_r_ff ? {sec_data_ecc_lo_r_ff[pt.DCCM_ECC_WIDTH-1:0],sec_data_lo_r_ff[pt.DCCM_DATA_WIDTH-1:0]} : {sec_data_ecc_hi_r_ff[pt.DCCM_ECC_WIDTH-1:0],sec_data_hi_r_ff[pt.DCCM_DATA_WIDTH-1:0]}) : (dma_dccm_wen ? {dma_dccm_wdata_ecc_lo[pt.DCCM_ECC_WIDTH-1:0],dma_dccm_wdata_lo[pt.DCCM_DATA_WIDTH-1:0]} : {stbuf_ecc_any[pt.DCCM_ECC_WIDTH-1:0],stbuf_data_any[pt.DCCM_DATA_WIDTH-1:0]}); assign dccm_wr_data_hi[pt.DCCM_FDATA_WIDTH-1:0] = ld_single_ecc_error_r_ff ? (ld_single_ecc_error_hi_r_ff ? {sec_data_ecc_hi_r_ff[pt.DCCM_ECC_WIDTH-1:0],sec_data_hi_r_ff[pt.DCCM_DATA_WIDTH-1:0]} : {sec_data_ecc_lo_r_ff[pt.DCCM_ECC_WIDTH-1:0],sec_data_lo_r_ff[pt.DCCM_DATA_WIDTH-1:0]}) : (dma_dccm_wen ? {dma_dccm_wdata_ecc_hi[pt.DCCM_ECC_WIDTH-1:0],dma_dccm_wdata_hi[pt.DCCM_DATA_WIDTH-1:0]} : {stbuf_ecc_any[pt.DCCM_ECC_WIDTH-1:0],stbuf_data_any[pt.DCCM_DATA_WIDTH-1:0]}); // DCCM outputs assign store_byteen_m[3:0] = {4{lsu_pkt_m.store}} & (({4{lsu_pkt_m.by}} & 4'b0001) | ({4{lsu_pkt_m.half}} & 4'b0011) | ({4{lsu_pkt_m.word}} & 4'b1111)); assign store_byteen_r[3:0] = {4{lsu_pkt_r.store}} & (({4{lsu_pkt_r.by}} & 4'b0001) | ({4{lsu_pkt_r.half}} & 4'b0011) | ({4{lsu_pkt_r.word}} & 4'b1111)); assign store_byteen_ext_m[7:0] = {4'b0,store_byteen_m[3:0]} << lsu_addr_m[1:0]; // The packet in m assign store_byteen_ext_r[7:0] = {4'b0,store_byteen_r[3:0]} << lsu_addr_r[1:0]; assign dccm_wr_bypass_d_m_lo = (stbuf_addr_any[pt.DCCM_BITS-1:2] == lsu_addr_m[pt.DCCM_BITS-1:2]) & addr_in_dccm_m; assign dccm_wr_bypass_d_m_hi = (stbuf_addr_any[pt.DCCM_BITS-1:2] == end_addr_m[pt.DCCM_BITS-1:2]) & addr_in_dccm_m; assign dccm_wr_bypass_d_r_lo = (stbuf_addr_any[pt.DCCM_BITS-1:2] == lsu_addr_r[pt.DCCM_BITS-1:2]) & addr_in_dccm_r; assign dccm_wr_bypass_d_r_hi = (stbuf_addr_any[pt.DCCM_BITS-1:2] == end_addr_r[pt.DCCM_BITS-1:2]) & addr_in_dccm_r; if (pt.LOAD_TO_USE_PLUS1 == 1) begin: L2U1_Plus1_1 logic dccm_wren_Q; logic [31:0] dccm_wr_data_Q; logic dccm_wr_bypass_d_m_lo_Q, dccm_wr_bypass_d_m_hi_Q; logic [31:0] store_data_pre_hi_r, store_data_pre_lo_r; assign {store_data_pre_hi_r[31:0], store_data_pre_lo_r[31:0]} = {32'b0,store_data_r[31:0]} << 8*lsu_addr_r[1:0]; for (genvar i=0; i<4; i++) begin assign store_data_lo_r[(8*i)+7:(8*i)] = store_byteen_ext_r[i] ? store_data_pre_lo_r[(8*i)+7:(8*i)] : ((dccm_wren_Q & dccm_wr_bypass_d_m_lo_Q) ? dccm_wr_data_Q[(8*i)+7:(8*i)] : sec_data_lo_r[(8*i)+7:(8*i)]); assign store_data_hi_r[(8*i)+7:(8*i)] = store_byteen_ext_r[i+4] ? store_data_pre_hi_r[(8*i)+7:(8*i)] : ((dccm_wren_Q & dccm_wr_bypass_d_m_hi_Q) ? dccm_wr_data_Q[(8*i)+7:(8*i)] : sec_data_hi_r[(8*i)+7:(8*i)]); assign store_datafn_lo_r[(8*i)+7:(8*i)] = store_byteen_ext_r[i] ? store_data_pre_lo_r[(8*i)+7:(8*i)] : ((lsu_stbuf_commit_any & dccm_wr_bypass_d_r_lo) ? stbuf_data_any[(8*i)+7:(8*i)] : ((dccm_wren_Q & dccm_wr_bypass_d_m_lo_Q) ? dccm_wr_data_Q[(8*i)+7:(8*i)] : sec_data_lo_r[(8*i)+7:(8*i)])); assign store_datafn_hi_r[(8*i)+7:(8*i)] = store_byteen_ext_r[i+4] ? store_data_pre_hi_r[(8*i)+7:(8*i)] : ((lsu_stbuf_commit_any & dccm_wr_bypass_d_r_hi) ? stbuf_data_any[(8*i)+7:(8*i)] : ((dccm_wren_Q & dccm_wr_bypass_d_m_hi_Q) ? dccm_wr_data_Q[(8*i)+7:(8*i)] : sec_data_hi_r[(8*i)+7:(8*i)])); end rvdff #(1) dccm_wren_ff (.*, .din(lsu_stbuf_commit_any), .dout(dccm_wren_Q), .clk(lsu_free_c2_clk)); // ECC load errors writing to dccm shouldn't fwd to stores in pipe rvdffe #(32) dccm_wrdata_ff (.*, .din(stbuf_data_any[31:0]), .dout(dccm_wr_data_Q[31:0]), .en(lsu_stbuf_commit_any | clk_override), .clk(clk)); rvdff #(1) dccm_wrbyp_dm_loff (.*, .din(dccm_wr_bypass_d_m_lo), .dout(dccm_wr_bypass_d_m_lo_Q), .clk(lsu_free_c2_clk)); rvdff #(1) dccm_wrbyp_dm_hiff (.*, .din(dccm_wr_bypass_d_m_hi), .dout(dccm_wr_bypass_d_m_hi_Q), .clk(lsu_free_c2_clk)); rvdff #(32) store_data_rff (.*, .din(store_data_m[31:0]), .dout(store_data_r[31:0]), .clk(lsu_store_c1_r_clk)); end else begin: L2U1_Plus1_0 logic [31:0] store_data_hi_m, store_data_lo_m; logic [63:0] store_data_mask; assign {store_data_hi_m[31:0] , store_data_lo_m[31:0]} = {32'b0,store_data_m[31:0]} << 8*lsu_addr_m[1:0]; for (genvar i=0; i<4; i++) begin assign store_data_hi_r_in[(8*i)+7:(8*i)] = store_byteen_ext_m[i+4] ? store_data_hi_m[(8*i)+7:(8*i)] : ((lsu_stbuf_commit_any & dccm_wr_bypass_d_m_hi) ? stbuf_data_any[(8*i)+7:(8*i)] : sec_data_hi_m[(8*i)+7:(8*i)]); assign store_data_lo_r_in[(8*i)+7:(8*i)] = store_byteen_ext_m[i] ? store_data_lo_m[(8*i)+7:(8*i)] : ((lsu_stbuf_commit_any & dccm_wr_bypass_d_m_lo) ? stbuf_data_any[(8*i)+7:(8*i)] : sec_data_lo_m[(8*i)+7:(8*i)]); assign store_datafn_lo_r[(8*i)+7:(8*i)] = (lsu_stbuf_commit_any & dccm_wr_bypass_d_r_lo & ~store_byteen_ext_r[i]) ? stbuf_data_any[(8*i)+7:(8*i)] : store_data_lo_r[(8*i)+7:(8*i)]; assign store_datafn_hi_r[(8*i)+7:(8*i)] = (lsu_stbuf_commit_any & dccm_wr_bypass_d_r_hi & ~store_byteen_ext_r[i+4]) ? stbuf_data_any[(8*i)+7:(8*i)] : store_data_hi_r[(8*i)+7:(8*i)]; end // for (genvar i=0; i> 8*lsu_addr_r[1:0]) & store_data_mask[31:0]; rvdffe #(pt.DCCM_DATA_WIDTH) store_data_hi_rff (.*, .din(store_data_hi_r_in[pt.DCCM_DATA_WIDTH-1:0]), .dout(store_data_hi_r[pt.DCCM_DATA_WIDTH-1:0]), .en((ldst_dual_m & lsu_pkt_m.valid & lsu_pkt_m.store) | clk_override), .clk(clk)); rvdff #(pt.DCCM_DATA_WIDTH) store_data_lo_rff (.*, .din(store_data_lo_r_in[pt.DCCM_DATA_WIDTH-1:0]), .dout(store_data_lo_r[pt.DCCM_DATA_WIDTH-1:0]), .clk(lsu_store_c1_r_clk)); end assign dccm_rdata_lo_m[pt.DCCM_DATA_WIDTH-1:0] = dccm_rd_data_lo[pt.DCCM_DATA_WIDTH-1:0]; // for ld choose dccm_out assign dccm_rdata_hi_m[pt.DCCM_DATA_WIDTH-1:0] = dccm_rd_data_hi[pt.DCCM_DATA_WIDTH-1:0]; // for ld this is used for ecc assign dccm_data_ecc_lo_m[pt.DCCM_ECC_WIDTH-1:0] = dccm_rd_data_lo[pt.DCCM_FDATA_WIDTH-1:pt.DCCM_DATA_WIDTH]; assign dccm_data_ecc_hi_m[pt.DCCM_ECC_WIDTH-1:0] = dccm_rd_data_hi[pt.DCCM_FDATA_WIDTH-1:pt.DCCM_DATA_WIDTH]; // PIC signals. PIC ignores the lower 2 bits of address since PIC memory registers are 32-bits assign picm_wren = (lsu_pkt_r.valid & lsu_pkt_r.store & addr_in_pic_r & lsu_commit_r) | dma_pic_wen; assign picm_rden = lsu_pkt_d.valid & lsu_pkt_d.load & addr_in_pic_d; assign picm_mken = lsu_pkt_d.valid & lsu_pkt_d.store & addr_in_pic_d; // Get the mask for stores assign picm_rdaddr[31:0] = pt.PIC_BASE_ADDR | {{32-pt.PIC_BITS{1'b0}},lsu_addr_d[pt.PIC_BITS-1:0]}; assign picm_wraddr[31:0] = pt.PIC_BASE_ADDR | {{32-pt.PIC_BITS{1'b0}},(dma_pic_wen ? dma_mem_addr[pt.PIC_BITS-1:0] : lsu_addr_r[pt.PIC_BITS-1:0])}; assign picm_wr_data[31:0] = dma_pic_wen ? dma_mem_wdata[31:0] : store_datafn_lo_r[31:0]; assign picm_mask_data_m[31:0] = picm_rd_data_m[31:0]; assign picm_rd_data_m[63:0] = {picm_rd_data[31:0],picm_rd_data[31:0]}; if (pt.DCCM_ENABLE == 1) begin: Gen_dccm_enable rvdff #(1) dccm_rden_mff (.*, .din(lsu_dccm_rden_d), .dout(lsu_dccm_rden_m), .clk(lsu_c2_m_clk)); rvdff #(1) dccm_rden_rff (.*, .din(lsu_dccm_rden_m), .dout(lsu_dccm_rden_r), .clk(lsu_c2_r_clk)); // ECC correction flops since dccm write happens next cycle // We are writing to dccm in r+1 for ecc correction since fast_int needs to be blocked in decode - 1. We can probably write in r for plus0 configuration since we know ecc error in M. // In that case these (_ff) flops are needed only in plus1 configuration rvdff #(1) ld_double_ecc_error_rff (.*, .din(lsu_double_ecc_error_r), .dout(lsu_double_ecc_error_r_ff), .clk(lsu_free_c2_clk)); rvdff #(1) ld_single_ecc_error_hi_rff (.*, .din(ld_single_ecc_error_hi_r_ns), .dout(ld_single_ecc_error_hi_r_ff), .clk(lsu_free_c2_clk)); rvdff #(1) ld_single_ecc_error_lo_rff (.*, .din(ld_single_ecc_error_lo_r_ns), .dout(ld_single_ecc_error_lo_r_ff), .clk(lsu_free_c2_clk)); rvdffe #(pt.DCCM_BITS) ld_sec_addr_hi_rff (.*, .din(end_addr_r[pt.DCCM_BITS-1:0]), .dout(ld_sec_addr_hi_r_ff[pt.DCCM_BITS-1:0]), .en(ld_single_ecc_error_r | clk_override), .clk(clk)); rvdffe #(pt.DCCM_BITS) ld_sec_addr_lo_rff (.*, .din(lsu_addr_r[pt.DCCM_BITS-1:0]), .dout(ld_sec_addr_lo_r_ff[pt.DCCM_BITS-1:0]), .en(ld_single_ecc_error_r | clk_override), .clk(clk)); end else begin: Gen_dccm_disable assign lsu_dccm_rden_m = '0; assign lsu_dccm_rden_r = '0; assign lsu_double_ecc_error_r_ff = 1'b0; assign ld_single_ecc_error_hi_r_ff = 1'b0; assign ld_single_ecc_error_lo_r_ff = 1'b0; assign ld_sec_addr_hi_r_ff[pt.DCCM_BITS-1:0] = '0; assign ld_sec_addr_lo_r_ff[pt.DCCM_BITS-1:0] = '0; end `ifdef RV_ASSERT_ON // Load single ECC error correction implies commit/dma property ld_single_ecc_error_commit; @(posedge clk) disable iff(~rst_l) (ld_single_ecc_error_r_ff & dccm_wren) |-> ($past(lsu_commit_r | lsu_pkt_r.dma)); endproperty assert_ld_single_ecc_error_commit: assert property (ld_single_ecc_error_commit) else $display("No commit or DMA but ECC correction happened"); `endif endmodule