476 lines
24 KiB
Systemverilog
476 lines
24 KiB
Systemverilog
// SPDX-License-Identifier: Apache-2.0
|
|
// Copyright 2020 Western Digital Corporation or it's affiliates.
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
//
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
|
|
//********************************************************************************
|
|
// $Id$
|
|
//
|
|
// Owner:
|
|
// Function: AXI4 -> AHB Bridge
|
|
// Comments:
|
|
//
|
|
//********************************************************************************
|
|
module axi4_to_ahb
|
|
import el2_pkg::*;
|
|
#(
|
|
`include "el2_param.vh"
|
|
,parameter TAG = 1) (
|
|
|
|
input clk,
|
|
input rst_l,
|
|
input scan_mode,
|
|
input bus_clk_en,
|
|
input clk_override,
|
|
|
|
// AXI signals
|
|
// AXI Write Channels
|
|
input logic axi_awvalid,
|
|
output logic axi_awready,
|
|
input logic [TAG-1:0] axi_awid,
|
|
input logic [31:0] axi_awaddr,
|
|
input logic [2:0] axi_awsize,
|
|
input logic [2:0] axi_awprot,
|
|
|
|
input logic axi_wvalid,
|
|
output logic axi_wready,
|
|
input logic [63:0] axi_wdata,
|
|
input logic [7:0] axi_wstrb,
|
|
input logic axi_wlast,
|
|
|
|
output logic axi_bvalid,
|
|
input logic axi_bready,
|
|
output logic [1:0] axi_bresp,
|
|
output logic [TAG-1:0] axi_bid,
|
|
|
|
// AXI Read Channels
|
|
input logic axi_arvalid,
|
|
output logic axi_arready,
|
|
input logic [TAG-1:0] axi_arid,
|
|
input logic [31:0] axi_araddr,
|
|
input logic [2:0] axi_arsize,
|
|
input logic [2:0] axi_arprot,
|
|
|
|
output logic axi_rvalid,
|
|
input logic axi_rready,
|
|
output logic [TAG-1:0] axi_rid,
|
|
output logic [63:0] axi_rdata,
|
|
output logic [1:0] axi_rresp,
|
|
output logic axi_rlast,
|
|
|
|
// AHB-Lite signals
|
|
output logic [31:0] ahb_haddr, // ahb bus address
|
|
output logic [2:0] ahb_hburst, // tied to 0
|
|
output logic ahb_hmastlock, // tied to 0
|
|
output logic [3:0] ahb_hprot, // tied to 4'b0011
|
|
output logic [2:0] ahb_hsize, // size of bus transaction (possible values 0,1,2,3)
|
|
output logic [1:0] ahb_htrans, // Transaction type (possible values 0,2 only right now)
|
|
output logic ahb_hwrite, // ahb bus write
|
|
output logic [63:0] ahb_hwdata, // ahb bus write data
|
|
|
|
input logic [63:0] ahb_hrdata, // ahb bus read data
|
|
input logic ahb_hready, // slave ready to accept transaction
|
|
input logic ahb_hresp // slave response (high indicates erro)
|
|
|
|
);
|
|
|
|
localparam ID = 1;
|
|
localparam PRTY = 1;
|
|
typedef enum logic [2:0] {IDLE=3'b000, CMD_RD=3'b001, CMD_WR=3'b010, DATA_RD=3'b011, DATA_WR=3'b100, DONE=3'b101, STREAM_RD=3'b110, STREAM_ERR_RD=3'b111} state_t;
|
|
state_t buf_state, buf_nxtstate;
|
|
|
|
logic slave_valid;
|
|
logic slave_ready;
|
|
logic [TAG-1:0] slave_tag;
|
|
logic [63:0] slave_rdata;
|
|
logic [3:0] slave_opc;
|
|
|
|
logic wrbuf_en, wrbuf_data_en;
|
|
logic wrbuf_cmd_sent, wrbuf_rst;
|
|
logic wrbuf_vld;
|
|
logic wrbuf_data_vld;
|
|
logic [TAG-1:0] wrbuf_tag;
|
|
logic [2:0] wrbuf_size;
|
|
logic [31:0] wrbuf_addr;
|
|
logic [63:0] wrbuf_data;
|
|
logic [7:0] wrbuf_byteen;
|
|
|
|
logic bus_write_clk_en;
|
|
logic bus_clk, bus_write_clk;
|
|
|
|
logic master_valid;
|
|
logic master_ready;
|
|
logic [TAG-1:0] master_tag;
|
|
logic [31:0] master_addr;
|
|
logic [63:0] master_wdata;
|
|
logic [2:0] master_size;
|
|
logic [2:0] master_opc;
|
|
logic [7:0] master_byteen;
|
|
|
|
// Buffer signals (one entry buffer)
|
|
logic [31:0] buf_addr;
|
|
logic [1:0] buf_size;
|
|
logic buf_write;
|
|
logic [7:0] buf_byteen;
|
|
logic buf_aligned;
|
|
logic [63:0] buf_data;
|
|
logic [TAG-1:0] buf_tag;
|
|
|
|
//Miscellaneous signals
|
|
logic buf_rst;
|
|
logic [TAG-1:0] buf_tag_in;
|
|
logic [31:0] buf_addr_in;
|
|
logic [7:0] buf_byteen_in;
|
|
logic [63:0] buf_data_in;
|
|
logic buf_write_in;
|
|
logic buf_aligned_in;
|
|
logic [2:0] buf_size_in;
|
|
|
|
logic buf_state_en;
|
|
logic buf_wr_en;
|
|
logic buf_data_wr_en;
|
|
logic slvbuf_error_en;
|
|
logic wr_cmd_vld;
|
|
|
|
logic cmd_done_rst, cmd_done, cmd_doneQ;
|
|
logic trxn_done;
|
|
logic [2:0] buf_cmd_byte_ptr, buf_cmd_byte_ptrQ, buf_cmd_nxtbyte_ptr;
|
|
logic buf_cmd_byte_ptr_en;
|
|
logic found;
|
|
|
|
logic slave_valid_pre;
|
|
logic ahb_hready_q;
|
|
logic ahb_hresp_q;
|
|
logic [1:0] ahb_htrans_q;
|
|
logic ahb_hwrite_q;
|
|
logic [63:0] ahb_hrdata_q;
|
|
|
|
|
|
logic slvbuf_write;
|
|
logic slvbuf_error;
|
|
logic [TAG-1:0] slvbuf_tag;
|
|
|
|
logic slvbuf_error_in;
|
|
logic slvbuf_wr_en;
|
|
logic bypass_en;
|
|
logic rd_bypass_idle;
|
|
|
|
logic last_addr_en;
|
|
logic [31:0] last_bus_addr;
|
|
|
|
// Clocks
|
|
logic buf_clken, slvbuf_clken;
|
|
logic ahbm_addr_clken;
|
|
logic ahbm_data_clken;
|
|
|
|
logic buf_clk, slvbuf_clk;
|
|
logic ahbm_clk;
|
|
logic ahbm_addr_clk;
|
|
logic ahbm_data_clk;
|
|
|
|
// Function to get the length from byte enable
|
|
function automatic logic [1:0] get_write_size;
|
|
input logic [7:0] byteen;
|
|
|
|
logic [1:0] size;
|
|
|
|
size[1:0] = (2'b11 & {2{(byteen[7:0] == 8'hff)}}) |
|
|
(2'b10 & {2{((byteen[7:0] == 8'hf0) | (byteen[7:0] == 8'h0f))}}) |
|
|
(2'b01 & {2{((byteen[7:0] == 8'hc0) | (byteen[7:0] == 8'h30) | (byteen[7:0] == 8'h0c) | (byteen[7:0] == 8'h03))}});
|
|
|
|
return size[1:0];
|
|
endfunction // get_write_size
|
|
|
|
// Function to get the length from byte enable
|
|
function automatic logic [2:0] get_write_addr;
|
|
input logic [7:0] byteen;
|
|
|
|
logic [2:0] addr;
|
|
|
|
addr[2:0] = (3'h0 & {3{((byteen[7:0] == 8'hff) | (byteen[7:0] == 8'h0f) | (byteen[7:0] == 8'h03))}}) |
|
|
(3'h2 & {3{(byteen[7:0] == 8'h0c)}}) |
|
|
(3'h4 & {3{((byteen[7:0] == 8'hf0) | (byteen[7:0] == 8'h03))}}) |
|
|
(3'h6 & {3{(byteen[7:0] == 8'hc0)}});
|
|
|
|
return addr[2:0];
|
|
endfunction // get_write_addr
|
|
|
|
// Function to get the next byte pointer
|
|
function automatic logic [2:0] get_nxtbyte_ptr (logic [2:0] current_byte_ptr, logic [7:0] byteen, logic get_next);
|
|
logic [2:0] start_ptr;
|
|
logic found;
|
|
found = '0;
|
|
start_ptr[2:0] = get_next ? (current_byte_ptr[2:0] + 3'b1) : current_byte_ptr[2:0];
|
|
for (int j=0; j<8; j++) begin
|
|
if (~found) begin
|
|
get_nxtbyte_ptr[2:0] = 3'(j);
|
|
found |= (byteen[j] & (3'(j) >= start_ptr[2:0])) ;
|
|
end
|
|
end
|
|
endfunction // get_nextbyte_ptr
|
|
|
|
|
|
// Write buffer
|
|
assign wrbuf_en = axi_awvalid & axi_awready & master_ready;
|
|
assign wrbuf_data_en = axi_wvalid & axi_wready & master_ready;
|
|
assign wrbuf_cmd_sent = master_valid & master_ready & (master_opc[2:1] == 2'b01);
|
|
assign wrbuf_rst = wrbuf_cmd_sent & ~wrbuf_en;
|
|
|
|
assign axi_awready = ~(wrbuf_vld & ~wrbuf_cmd_sent) & master_ready;
|
|
assign axi_wready = ~(wrbuf_data_vld & ~wrbuf_cmd_sent) & master_ready;
|
|
assign axi_arready = ~(wrbuf_vld & wrbuf_data_vld) & master_ready;
|
|
assign axi_rlast = 1'b1;
|
|
|
|
assign wr_cmd_vld = (wrbuf_vld & wrbuf_data_vld);
|
|
assign master_valid = wr_cmd_vld | axi_arvalid;
|
|
assign master_tag[TAG-1:0] = wr_cmd_vld ? wrbuf_tag[TAG-1:0] : axi_arid[TAG-1:0];
|
|
assign master_opc[2:0] = wr_cmd_vld ? 3'b011 : 3'b0;
|
|
assign master_addr[31:0] = wr_cmd_vld ? wrbuf_addr[31:0] : axi_araddr[31:0];
|
|
assign master_size[2:0] = wr_cmd_vld ? wrbuf_size[2:0] : axi_arsize[2:0];
|
|
assign master_byteen[7:0] = wrbuf_byteen[7:0];
|
|
assign master_wdata[63:0] = wrbuf_data[63:0];
|
|
|
|
// AXI response channel signals
|
|
assign axi_bvalid = slave_valid & slave_ready & slave_opc[3];
|
|
assign axi_bresp[1:0] = slave_opc[0] ? 2'b10 : (slave_opc[1] ? 2'b11 : 2'b0);
|
|
assign axi_bid[TAG-1:0] = slave_tag[TAG-1:0];
|
|
|
|
assign axi_rvalid = slave_valid & slave_ready & (slave_opc[3:2] == 2'b0);
|
|
assign axi_rresp[1:0] = slave_opc[0] ? 2'b10 : (slave_opc[1] ? 2'b11 : 2'b0);
|
|
assign axi_rid[TAG-1:0] = slave_tag[TAG-1:0];
|
|
assign axi_rdata[63:0] = slave_rdata[63:0];
|
|
assign slave_ready = axi_bready & axi_rready;
|
|
|
|
// Clock header logic
|
|
assign bus_write_clk_en = bus_clk_en & ((axi_awvalid & axi_awready) | (axi_wvalid & axi_wready));
|
|
|
|
rvclkhdr bus_cgc (.en(bus_clk_en), .l1clk(bus_clk), .*);
|
|
rvclkhdr bus_write_cgc (.en(bus_write_clk_en), .l1clk(bus_write_clk), .*);
|
|
|
|
|
|
// FIFO state machine
|
|
always_comb begin
|
|
buf_nxtstate = IDLE;
|
|
buf_state_en = 1'b0;
|
|
buf_wr_en = 1'b0;
|
|
buf_data_wr_en = 1'b0;
|
|
slvbuf_error_in = 1'b0;
|
|
slvbuf_error_en = 1'b0;
|
|
buf_write_in = 1'b0;
|
|
cmd_done = 1'b0;
|
|
trxn_done = 1'b0;
|
|
buf_cmd_byte_ptr_en = 1'b0;
|
|
buf_cmd_byte_ptr[2:0] = '0;
|
|
slave_valid_pre = 1'b0;
|
|
master_ready = 1'b0;
|
|
ahb_htrans[1:0] = 2'b0;
|
|
slvbuf_wr_en = 1'b0;
|
|
bypass_en = 1'b0;
|
|
rd_bypass_idle = 1'b0;
|
|
|
|
case (buf_state)
|
|
IDLE: begin
|
|
master_ready = 1'b1;
|
|
buf_write_in = (master_opc[2:1] == 2'b01);
|
|
buf_nxtstate = buf_write_in ? CMD_WR : CMD_RD;
|
|
buf_state_en = master_valid & master_ready;
|
|
buf_wr_en = buf_state_en;
|
|
buf_data_wr_en = buf_state_en & (buf_nxtstate == CMD_WR);
|
|
buf_cmd_byte_ptr_en = buf_state_en;
|
|
buf_cmd_byte_ptr[2:0] = buf_write_in ? get_nxtbyte_ptr(3'b0,buf_byteen_in[7:0],1'b0) : master_addr[2:0];
|
|
bypass_en = buf_state_en;
|
|
rd_bypass_idle = bypass_en & (buf_nxtstate == CMD_RD);
|
|
ahb_htrans[1:0] = {2{bypass_en}} & 2'b10;
|
|
end
|
|
CMD_RD: begin
|
|
buf_nxtstate = (master_valid & (master_opc[2:0] == 3'b000))? STREAM_RD : DATA_RD;
|
|
buf_state_en = ahb_hready_q & (ahb_htrans_q[1:0] != 2'b0) & ~ahb_hwrite_q;
|
|
cmd_done = buf_state_en & ~master_valid;
|
|
slvbuf_wr_en = buf_state_en;
|
|
master_ready = buf_state_en & (buf_nxtstate == STREAM_RD);
|
|
buf_wr_en = master_ready;
|
|
bypass_en = master_ready & master_valid;
|
|
buf_cmd_byte_ptr[2:0] = bypass_en ? master_addr[2:0] : buf_addr[2:0];
|
|
ahb_htrans[1:0] = 2'b10 & {2{~buf_state_en | bypass_en}};
|
|
end
|
|
STREAM_RD: begin
|
|
master_ready = (ahb_hready_q & ~ahb_hresp_q) & ~(master_valid & master_opc[2:1] == 2'b01);
|
|
buf_wr_en = (master_valid & master_ready & (master_opc[2:0] == 3'b000)); // update the fifo if we are streaming the read commands
|
|
buf_nxtstate = ahb_hresp_q ? STREAM_ERR_RD : (buf_wr_en ? STREAM_RD : DATA_RD); // assuming that the master accpets the slave response right away.
|
|
buf_state_en = (ahb_hready_q | ahb_hresp_q);
|
|
buf_data_wr_en = buf_state_en;
|
|
slvbuf_error_in = ahb_hresp_q;
|
|
slvbuf_error_en = buf_state_en;
|
|
slave_valid_pre = buf_state_en & ~ahb_hresp_q; // send a response right away if we are not going through an error response.
|
|
cmd_done = buf_state_en & ~master_valid; // last one of the stream should not send a htrans
|
|
bypass_en = master_ready & master_valid & (buf_nxtstate == STREAM_RD) & buf_state_en;
|
|
buf_cmd_byte_ptr[2:0] = bypass_en ? master_addr[2:0] : buf_addr[2:0];
|
|
ahb_htrans[1:0] = 2'b10 & {2{~((buf_nxtstate != STREAM_RD) & buf_state_en)}};
|
|
slvbuf_wr_en = buf_wr_en; // shifting the contents from the buf to slv_buf for streaming cases
|
|
end // case: STREAM_RD
|
|
STREAM_ERR_RD: begin
|
|
buf_nxtstate = DATA_RD;
|
|
buf_state_en = ahb_hready_q & (ahb_htrans_q[1:0] != 2'b0) & ~ahb_hwrite_q;
|
|
slave_valid_pre = buf_state_en;
|
|
slvbuf_wr_en = buf_state_en; // Overwrite slvbuf with buffer
|
|
buf_cmd_byte_ptr[2:0] = buf_addr[2:0];
|
|
ahb_htrans[1:0] = 2'b10 & {2{~buf_state_en}};
|
|
end
|
|
DATA_RD: begin
|
|
buf_nxtstate = DONE;
|
|
buf_state_en = (ahb_hready_q | ahb_hresp_q);
|
|
buf_data_wr_en = buf_state_en;
|
|
slvbuf_error_in= ahb_hresp_q;
|
|
slvbuf_error_en= buf_state_en;
|
|
slvbuf_wr_en = buf_state_en;
|
|
|
|
end
|
|
CMD_WR: begin
|
|
buf_nxtstate = DATA_WR;
|
|
trxn_done = ahb_hready_q & ahb_hwrite_q & (ahb_htrans_q[1:0] != 2'b0);
|
|
buf_state_en = trxn_done;
|
|
buf_cmd_byte_ptr_en = buf_state_en;
|
|
slvbuf_wr_en = buf_state_en;
|
|
buf_cmd_byte_ptr = trxn_done ? get_nxtbyte_ptr(buf_cmd_byte_ptrQ[2:0],buf_byteen[7:0],1'b1) : buf_cmd_byte_ptrQ;
|
|
cmd_done = trxn_done & (buf_aligned | (buf_cmd_byte_ptrQ == 3'b111) |
|
|
(buf_byteen[get_nxtbyte_ptr(buf_cmd_byte_ptrQ[2:0],buf_byteen[7:0],1'b1)] == 1'b0));
|
|
ahb_htrans[1:0] = {2{~(cmd_done | cmd_doneQ)}} & 2'b10;
|
|
end
|
|
DATA_WR: begin
|
|
buf_state_en = (cmd_doneQ & ahb_hready_q) | ahb_hresp_q;
|
|
master_ready = buf_state_en & ~ahb_hresp_q & slave_ready; // Ready to accept new command if current command done and no error
|
|
buf_nxtstate = (ahb_hresp_q | ~slave_ready) ? DONE :
|
|
((master_valid & master_ready) ? ((master_opc[2:1] == 2'b01) ? CMD_WR : CMD_RD) : IDLE);
|
|
slvbuf_error_in = ahb_hresp_q;
|
|
slvbuf_error_en = buf_state_en;
|
|
|
|
buf_write_in = (master_opc[2:1] == 2'b01);
|
|
buf_wr_en = buf_state_en & ((buf_nxtstate == CMD_WR) | (buf_nxtstate == CMD_RD));
|
|
buf_data_wr_en = buf_wr_en;
|
|
|
|
cmd_done = (ahb_hresp_q | (ahb_hready_q & (ahb_htrans_q[1:0] != 2'b0) &
|
|
((buf_cmd_byte_ptrQ == 3'b111) | (buf_byteen[get_nxtbyte_ptr(buf_cmd_byte_ptrQ[2:0],buf_byteen[7:0],1'b1)] == 1'b0))));
|
|
bypass_en = buf_state_en & buf_write_in & (buf_nxtstate == CMD_WR); // Only bypass for writes for the time being
|
|
ahb_htrans[1:0] = {2{(~(cmd_done | cmd_doneQ) | bypass_en)}} & 2'b10;
|
|
slave_valid_pre = buf_state_en & (buf_nxtstate != DONE);
|
|
|
|
trxn_done = ahb_hready_q & ahb_hwrite_q & (ahb_htrans_q[1:0] != 2'b0);
|
|
buf_cmd_byte_ptr_en = trxn_done | bypass_en;
|
|
buf_cmd_byte_ptr = bypass_en ? get_nxtbyte_ptr(3'b0,buf_byteen_in[7:0],1'b0) :
|
|
trxn_done ? get_nxtbyte_ptr(buf_cmd_byte_ptrQ[2:0],buf_byteen[7:0],1'b1) : buf_cmd_byte_ptrQ;
|
|
end
|
|
DONE: begin
|
|
buf_nxtstate = IDLE;
|
|
buf_state_en = slave_ready;
|
|
slvbuf_error_en = 1'b1;
|
|
slave_valid_pre = 1'b1;
|
|
end
|
|
endcase
|
|
end
|
|
|
|
assign buf_rst = 1'b0;
|
|
assign cmd_done_rst = slave_valid_pre;
|
|
assign buf_addr_in[31:3] = master_addr[31:3];
|
|
assign buf_addr_in[2:0] = (buf_aligned_in & (master_opc[2:1] == 2'b01)) ? get_write_addr(master_byteen[7:0]) : master_addr[2:0];
|
|
assign buf_tag_in[TAG-1:0] = master_tag[TAG-1:0];
|
|
assign buf_byteen_in[7:0] = wrbuf_byteen[7:0];
|
|
assign buf_data_in[63:0] = (buf_state == DATA_RD) ? ahb_hrdata_q[63:0] : master_wdata[63:0];
|
|
assign buf_size_in[1:0] = (buf_aligned_in & (master_size[1:0] == 2'b11) & (master_opc[2:1] == 2'b01)) ? get_write_size(master_byteen[7:0]) : master_size[1:0];
|
|
assign buf_aligned_in = (master_opc[2:0] == 3'b0) | // reads are always aligned since they are either DW or sideeffects
|
|
(master_size[1:0] == 2'b0) | (master_size[1:0] == 2'b01) | (master_size[1:0] == 2'b10) | // Always aligned for Byte/HW/Word since they can be only for non-idempotent. IFU/SB are always aligned
|
|
((master_size[1:0] == 2'b11) &
|
|
((master_byteen[7:0] == 8'h3) | (master_byteen[7:0] == 8'hc) | (master_byteen[7:0] == 8'h30) | (master_byteen[7:0] == 8'hc0) |
|
|
(master_byteen[7:0] == 8'hf) | (master_byteen[7:0] == 8'hf0) | (master_byteen[7:0] == 8'hff)));
|
|
|
|
// Generate the ahb signals
|
|
assign ahb_haddr[31:0] = bypass_en ? {master_addr[31:3],buf_cmd_byte_ptr[2:0]} : {buf_addr[31:3],buf_cmd_byte_ptr[2:0]};
|
|
assign ahb_hsize[2:0] = bypass_en ? {1'b0, ({2{buf_aligned_in}} & buf_size_in[1:0])} :
|
|
{1'b0, ({2{buf_aligned}} & buf_size[1:0])}; // Send the full size for aligned trxn
|
|
assign ahb_hburst[2:0] = 3'b0;
|
|
assign ahb_hmastlock = 1'b0;
|
|
assign ahb_hprot[3:0] = {3'b001,~axi_arprot[2]};
|
|
assign ahb_hwrite = bypass_en ? (master_opc[2:1] == 2'b01) : buf_write;
|
|
assign ahb_hwdata[63:0] = buf_data[63:0];
|
|
|
|
assign slave_valid = slave_valid_pre;
|
|
assign slave_opc[3:2] = slvbuf_write ? 2'b11 : 2'b00;
|
|
assign slave_opc[1:0] = {2{slvbuf_error}} & 2'b10;
|
|
assign slave_rdata[63:0] = slvbuf_error ? {2{last_bus_addr[31:0]}} : ((buf_state == DONE) ? buf_data[63:0] : ahb_hrdata_q[63:0]);
|
|
assign slave_tag[TAG-1:0] = slvbuf_tag[TAG-1:0];
|
|
|
|
assign last_addr_en = (ahb_htrans[1:0] != 2'b0) & ahb_hready & ahb_hwrite ;
|
|
|
|
|
|
rvdffsc #(.WIDTH(1)) wrbuf_vldff (.din(1'b1), .dout(wrbuf_vld), .en(wrbuf_en), .clear(wrbuf_rst), .clk(bus_clk), .*);
|
|
rvdffsc #(.WIDTH(1)) wrbuf_data_vldff(.din(1'b1), .dout(wrbuf_data_vld), .en(wrbuf_data_en), .clear(wrbuf_rst), .clk(bus_clk), .*);
|
|
rvdffs #(.WIDTH(TAG)) wrbuf_tagff (.din(axi_awid[TAG-1:0]), .dout(wrbuf_tag[TAG-1:0]), .en(wrbuf_en), .clk(bus_clk), .*);
|
|
rvdffs #(.WIDTH(3)) wrbuf_sizeff (.din(axi_awsize[2:0]), .dout(wrbuf_size[2:0]), .en(wrbuf_en), .clk(bus_clk), .*);
|
|
rvdffe #(.WIDTH(32)) wrbuf_addrff (.din(axi_awaddr[31:0]), .dout(wrbuf_addr[31:0]), .en(wrbuf_en), .clk(bus_clk), .*);
|
|
rvdffe #(.WIDTH(64)) wrbuf_dataff (.din(axi_wdata[63:0]), .dout(wrbuf_data[63:0]), .en(wrbuf_data_en), .clk(bus_clk), .*);
|
|
rvdffs #(.WIDTH(8)) wrbuf_byteenff (.din(axi_wstrb[7:0]), .dout(wrbuf_byteen[7:0]), .en(wrbuf_data_en), .clk(bus_clk), .*);
|
|
|
|
rvdffs #(.WIDTH(32)) last_bus_addrff (.din(ahb_haddr[31:0]), .dout(last_bus_addr[31:0]), .en(last_addr_en), .clk(ahbm_clk), .*);
|
|
|
|
rvdffsc #(.WIDTH($bits(state_t))) buf_state_ff (.din(buf_nxtstate), .dout({buf_state}), .en(buf_state_en), .clear(buf_rst), .clk(ahbm_clk), .*);
|
|
rvdffs #(.WIDTH(1)) buf_writeff (.din(buf_write_in), .dout(buf_write), .en(buf_wr_en), .clk(buf_clk), .*);
|
|
rvdffs #(.WIDTH(TAG)) buf_tagff (.din(buf_tag_in[TAG-1:0]), .dout(buf_tag[TAG-1:0]), .en(buf_wr_en), .clk(buf_clk), .*);
|
|
rvdffe #(.WIDTH(32)) buf_addrff (.din(buf_addr_in[31:0]), .dout(buf_addr[31:0]), .en(buf_wr_en & bus_clk_en), .*);
|
|
rvdffs #(.WIDTH(2)) buf_sizeff (.din(buf_size_in[1:0]), .dout(buf_size[1:0]), .en(buf_wr_en), .clk(buf_clk), .*);
|
|
rvdffs #(.WIDTH(1)) buf_alignedff (.din(buf_aligned_in), .dout(buf_aligned), .en(buf_wr_en), .clk(buf_clk), .*);
|
|
rvdffs #(.WIDTH(8)) buf_byteenff (.din(buf_byteen_in[7:0]), .dout(buf_byteen[7:0]), .en(buf_wr_en), .clk(buf_clk), .*);
|
|
rvdffe #(.WIDTH(64)) buf_dataff (.din(buf_data_in[63:0]), .dout(buf_data[63:0]), .en(buf_data_wr_en & bus_clk_en), .*);
|
|
|
|
|
|
rvdffs #(.WIDTH(1)) slvbuf_writeff (.din(buf_write), .dout(slvbuf_write), .en(slvbuf_wr_en), .clk(buf_clk), .*);
|
|
rvdffs #(.WIDTH(TAG)) slvbuf_tagff (.din(buf_tag[TAG-1:0]), .dout(slvbuf_tag[TAG-1:0]), .en(slvbuf_wr_en), .clk(buf_clk), .*);
|
|
rvdffs #(.WIDTH(1)) slvbuf_errorff (.din(slvbuf_error_in), .dout(slvbuf_error), .en(slvbuf_error_en), .clk(ahbm_clk), .*);
|
|
|
|
rvdffsc #(.WIDTH(1)) buf_cmd_doneff (.din(1'b1), .en(cmd_done), .dout(cmd_doneQ), .clear(cmd_done_rst), .clk(ahbm_clk), .*);
|
|
rvdffs #(.WIDTH(3)) buf_cmd_byte_ptrff (.din(buf_cmd_byte_ptr[2:0]), .dout(buf_cmd_byte_ptrQ[2:0]), .en(buf_cmd_byte_ptr_en), .clk(ahbm_clk), .*);
|
|
|
|
rvdff #(.WIDTH(1)) hready_ff (.din(ahb_hready), .dout(ahb_hready_q), .clk(ahbm_clk), .*);
|
|
rvdff #(.WIDTH(2)) htrans_ff (.din(ahb_htrans[1:0]), .dout(ahb_htrans_q[1:0]), .clk(ahbm_clk), .*);
|
|
rvdff #(.WIDTH(1)) hwrite_ff (.din(ahb_hwrite), .dout(ahb_hwrite_q), .clk(ahbm_addr_clk), .*);
|
|
rvdff #(.WIDTH(1)) hresp_ff (.din(ahb_hresp), .dout(ahb_hresp_q), .clk(ahbm_clk), .*);
|
|
rvdff #(.WIDTH(64)) hrdata_ff (.din(ahb_hrdata[63:0]), .dout(ahb_hrdata_q[63:0]), .clk(ahbm_data_clk), .*);
|
|
|
|
// Clock headers
|
|
// clock enables for ahbm addr/data
|
|
assign buf_clken = bus_clk_en & (buf_wr_en | slvbuf_wr_en | clk_override);
|
|
assign ahbm_addr_clken = bus_clk_en & ((ahb_hready & ahb_htrans[1]) | clk_override);
|
|
assign ahbm_data_clken = bus_clk_en & ((buf_state != IDLE) | clk_override);
|
|
|
|
rvclkhdr buf_cgc (.en(buf_clken), .l1clk(buf_clk), .*);
|
|
rvclkhdr ahbm_cgc (.en(bus_clk_en), .l1clk(ahbm_clk), .*);
|
|
rvclkhdr ahbm_addr_cgc (.en(ahbm_addr_clken), .l1clk(ahbm_addr_clk), .*);
|
|
rvclkhdr ahbm_data_cgc (.en(ahbm_data_clken), .l1clk(ahbm_data_clk), .*);
|
|
|
|
`ifdef ASSERT_ON
|
|
property ahb_trxn_aligned;
|
|
@(posedge ahbm_clk) ahb_htrans[1] |-> ((ahb_hsize[2:0] == 3'h0) |
|
|
((ahb_hsize[2:0] == 3'h1) & (ahb_haddr[0] == 1'b0)) |
|
|
((ahb_hsize[2:0] == 3'h2) & (ahb_haddr[1:0] == 2'b0)) |
|
|
((ahb_hsize[2:0] == 3'h3) & (ahb_haddr[2:0] == 3'b0)));
|
|
endproperty
|
|
assert_ahb_trxn_aligned: assert property (ahb_trxn_aligned) else
|
|
$display("Assertion ahb_trxn_aligned failed: ahb_htrans=2'h%h, ahb_hsize=3'h%h, ahb_haddr=32'h%h",ahb_htrans[1:0], ahb_hsize[2:0], ahb_haddr[31:0]);
|
|
|
|
property ahb_error_protocol;
|
|
@(posedge ahbm_clk) (ahb_hready & ahb_hresp) |-> (~$past(ahb_hready) & $past(ahb_hresp));
|
|
endproperty
|
|
assert_ahb_error_protocol: assert property (ahb_error_protocol) else
|
|
$display("Bus Error with hReady isn't preceded with Bus Error without hready");
|
|
`endif
|
|
|
|
endmodule // axi4_to_ahb
|