370 lines
22 KiB
Systemverilog
370 lines
22 KiB
Systemverilog
// SPDX-License-Identifier: Apache-2.0
|
|
// Copyright 2020 Western Digital Corporation or its affiliates.
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
//
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
|
|
|
|
module el2_exu
|
|
import el2_pkg::*;
|
|
#(
|
|
`include "el2_param.vh"
|
|
)
|
|
(
|
|
input logic clk, // Top level clock
|
|
input logic rst_l, // Reset
|
|
input logic scan_mode, // Scan control
|
|
|
|
input logic [1:0] dec_data_en, // Clock enable {x,r}, one cycle pulse
|
|
input logic [1:0] dec_ctl_en, // Clock enable {x,r}, two cycle pulse
|
|
input logic [31:0] dbg_cmd_wrdata, // Debug data to primary I0 RS1
|
|
input el2_alu_pkt_t i0_ap, // DEC alu {valid,predecodes}
|
|
|
|
input logic dec_debug_wdata_rs1_d, // Debug select to primary I0 RS1
|
|
|
|
input el2_predict_pkt_t dec_i0_predict_p_d, // DEC branch predict packet
|
|
input logic [pt.BHT_GHR_SIZE-1:0] i0_predict_fghr_d, // DEC predict fghr
|
|
input logic [pt.BTB_ADDR_HI:pt.BTB_ADDR_LO] i0_predict_index_d, // DEC predict index
|
|
input logic [pt.BTB_BTAG_SIZE-1:0] i0_predict_btag_d, // DEC predict branch tag
|
|
|
|
input logic [31:0] lsu_result_m, // Load result M-stage
|
|
input logic [31:0] lsu_nonblock_load_data, // nonblock load data
|
|
input logic dec_i0_rs1_en_d, // Qualify GPR RS1 data
|
|
input logic dec_i0_rs2_en_d, // Qualify GPR RS2 data
|
|
input logic [31:0] gpr_i0_rs1_d, // DEC data gpr
|
|
input logic [31:0] gpr_i0_rs2_d, // DEC data gpr
|
|
input logic [31:0] dec_i0_immed_d, // DEC data immediate
|
|
input logic [31:0] dec_i0_result_r, // DEC result in R-stage
|
|
input logic [12:1] dec_i0_br_immed_d, // Branch immediate
|
|
input logic dec_i0_alu_decode_d, // Valid to X-stage ALU
|
|
input logic dec_i0_branch_d, // Branch in D-stage
|
|
input logic dec_i0_select_pc_d, // PC select to RS1
|
|
input logic [31:1] dec_i0_pc_d, // Instruction PC
|
|
input logic [3:0] dec_i0_rs1_bypass_en_d, // DEC bypass select 1 - X-stage, 0 - dec bypass data
|
|
input logic [3:0] dec_i0_rs2_bypass_en_d, // DEC bypass select 1 - X-stage, 0 - dec bypass data
|
|
input logic dec_csr_ren_d, // CSR read select
|
|
input logic [31:0] dec_csr_rddata_d, // CSR read data
|
|
|
|
input logic dec_qual_lsu_d, // LSU instruction at D. Use to quiet LSU operands
|
|
input el2_mul_pkt_t mul_p, // DEC {valid, operand signs, low, operand bypass}
|
|
input el2_div_pkt_t div_p, // DEC {valid, unsigned, rem}
|
|
input logic dec_div_cancel, // Cancel the divide operation
|
|
|
|
input logic [31:1] pred_correct_npc_x, // DEC NPC for correctly predicted branch
|
|
|
|
input logic dec_tlu_flush_lower_r, // Flush divide and secondary ALUs
|
|
input logic [31:1] dec_tlu_flush_path_r, // Redirect target
|
|
|
|
|
|
input logic dec_extint_stall, // External stall mux select
|
|
input logic [31:2] dec_tlu_meihap, // External stall mux data
|
|
|
|
|
|
output logic [31:0] exu_lsu_rs1_d, // LSU operand
|
|
output logic [31:0] exu_lsu_rs2_d, // LSU operand
|
|
|
|
output logic exu_flush_final, // Pipe is being flushed this cycle
|
|
output logic [31:1] exu_flush_path_final, // Target for the oldest flush source
|
|
|
|
output logic [31:0] exu_i0_result_x, // Primary ALU result to DEC
|
|
output logic [31:1] exu_i0_pc_x, // Primary PC result to DEC
|
|
output logic [31:0] exu_csr_rs1_x, // RS1 source for a CSR instruction
|
|
|
|
output logic [31:1] exu_npc_r, // Divide NPC
|
|
output logic [1:0] exu_i0_br_hist_r, // to DEC I0 branch history
|
|
output logic exu_i0_br_error_r, // to DEC I0 branch error
|
|
output logic exu_i0_br_start_error_r, // to DEC I0 branch start error
|
|
output logic [pt.BTB_ADDR_HI:pt.BTB_ADDR_LO] exu_i0_br_index_r, // to DEC I0 branch index
|
|
output logic exu_i0_br_valid_r, // to DEC I0 branch valid
|
|
output logic exu_i0_br_mp_r, // to DEC I0 branch mispredict
|
|
output logic exu_i0_br_middle_r, // to DEC I0 branch middle
|
|
output logic [pt.BHT_GHR_SIZE-1:0] exu_i0_br_fghr_r, // to DEC I0 branch fghr
|
|
output logic exu_i0_br_way_r, // to DEC I0 branch way
|
|
|
|
output el2_predict_pkt_t exu_mp_pkt, // Mispredict branch packet
|
|
output logic [pt.BHT_GHR_SIZE-1:0] exu_mp_eghr, // Mispredict global history
|
|
output logic [pt.BHT_GHR_SIZE-1:0] exu_mp_fghr, // Mispredict fghr
|
|
output logic [pt.BTB_ADDR_HI:pt.BTB_ADDR_LO] exu_mp_index, // Mispredict index
|
|
output logic [pt.BTB_BTAG_SIZE-1:0] exu_mp_btag, // Mispredict btag
|
|
|
|
|
|
output logic exu_pmu_i0_br_misp, // to PMU - I0 E4 branch mispredict
|
|
output logic exu_pmu_i0_br_ataken, // to PMU - I0 E4 taken
|
|
output logic exu_pmu_i0_pc4, // to PMU - I0 E4 PC
|
|
|
|
|
|
output logic [31:0] exu_div_result, // Divide result
|
|
output logic exu_div_wren // Divide write enable to GPR
|
|
);
|
|
|
|
|
|
|
|
|
|
logic [31:0] i0_rs1_bypass_data_d;
|
|
logic [31:0] i0_rs2_bypass_data_d;
|
|
logic i0_rs1_bypass_en_d;
|
|
logic i0_rs2_bypass_en_d;
|
|
logic [31:0] i0_rs1_d, i0_rs2_d;
|
|
logic [31:0] muldiv_rs1_d;
|
|
logic [31:1] pred_correct_npc_r;
|
|
logic i0_pred_correct_upper_r;
|
|
logic [31:1] i0_flush_path_upper_r;
|
|
logic x_data_en, x_data_en_q1, x_data_en_q2, r_data_en, r_data_en_q2;
|
|
logic x_ctl_en, r_ctl_en;
|
|
|
|
logic [pt.BHT_GHR_SIZE-1:0] ghr_d_ns, ghr_d;
|
|
logic [pt.BHT_GHR_SIZE-1:0] ghr_x_ns, ghr_x;
|
|
logic i0_taken_d;
|
|
logic i0_taken_x;
|
|
logic i0_valid_d;
|
|
logic i0_valid_x;
|
|
logic [pt.BHT_GHR_SIZE-1:0] after_flush_eghr;
|
|
|
|
el2_predict_pkt_t final_predict_mp;
|
|
el2_predict_pkt_t i0_predict_newp_d;
|
|
|
|
logic flush_in_d;
|
|
logic [31:0] alu_result_x;
|
|
|
|
logic mul_valid_x;
|
|
logic [31:0] mul_result_x;
|
|
|
|
el2_predict_pkt_t i0_pp_r;
|
|
|
|
logic i0_flush_upper_d;
|
|
logic [31:1] i0_flush_path_d;
|
|
el2_predict_pkt_t i0_predict_p_d;
|
|
logic i0_pred_correct_upper_d;
|
|
|
|
logic i0_flush_upper_x;
|
|
logic [31:1] i0_flush_path_x;
|
|
el2_predict_pkt_t i0_predict_p_x;
|
|
logic i0_pred_correct_upper_x;
|
|
logic i0_branch_x;
|
|
|
|
localparam PREDPIPESIZE = pt.BTB_ADDR_HI-pt.BTB_ADDR_LO+1+pt.BHT_GHR_SIZE+pt.BTB_BTAG_SIZE;
|
|
logic [PREDPIPESIZE-1:0] predpipe_d, predpipe_x, predpipe_r, final_predpipe_mp;
|
|
|
|
|
|
|
|
|
|
rvdffpcie #(31) i_flush_path_x_ff (.*, .clk(clk), .en ( x_data_en ), .din ( i0_flush_path_d[31:1] ), .dout( i0_flush_path_x[31:1] ) );
|
|
rvdffe #(32) i_csr_rs1_x_ff (.*, .clk(clk), .en ( x_data_en_q1 ), .din ( i0_rs1_d[31:0] ), .dout( exu_csr_rs1_x[31:0] ) );
|
|
rvdffppe #($bits(el2_predict_pkt_t)) i_predictpacket_x_ff (.*, .clk(clk), .en ( x_data_en ), .din ( i0_predict_p_d ), .dout( i0_predict_p_x ) );
|
|
rvdffe #(PREDPIPESIZE) i_predpipe_x_ff (.*, .clk(clk), .en ( x_data_en_q2 ), .din ( predpipe_d ), .dout( predpipe_x ) );
|
|
rvdffe #(PREDPIPESIZE) i_predpipe_r_ff (.*, .clk(clk), .en ( r_data_en_q2 ), .din ( predpipe_x ), .dout( predpipe_r ) );
|
|
|
|
rvdffe #(4+pt.BHT_GHR_SIZE) i_x_ff (.*, .clk(clk), .en ( x_ctl_en ), .din ({i0_valid_d,i0_taken_d,i0_flush_upper_d,i0_pred_correct_upper_d,ghr_x_ns[pt.BHT_GHR_SIZE-1:0]} ),
|
|
.dout({i0_valid_x,i0_taken_x,i0_flush_upper_x,i0_pred_correct_upper_x,ghr_x[pt.BHT_GHR_SIZE-1:0]} ) );
|
|
|
|
rvdffppe #($bits(el2_predict_pkt_t)+1) i_r_ff0 (.*, .clk(clk), .en ( r_ctl_en ), .din ({i0_pred_correct_upper_x, i0_predict_p_x}),
|
|
.dout({i0_pred_correct_upper_r, i0_pp_r }) );
|
|
|
|
rvdffpcie #(31) i_flush_r_ff (.*, .clk(clk), .en ( r_data_en ), .din ( i0_flush_path_x[31:1] ), .dout( i0_flush_path_upper_r[31:1]) );
|
|
rvdffpcie #(31) i_npc_r_ff (.*, .clk(clk), .en ( r_data_en ), .din ( pred_correct_npc_x[31:1] ), .dout( pred_correct_npc_r[31:1] ) );
|
|
|
|
rvdffie #(pt.BHT_GHR_SIZE+2,1) i_misc_ff (.*, .clk(clk), .din ({ghr_d_ns[pt.BHT_GHR_SIZE-1:0], mul_p.valid, dec_i0_branch_d}),
|
|
.dout({ghr_d[pt.BHT_GHR_SIZE-1:0] , mul_valid_x, i0_branch_x}) );
|
|
|
|
|
|
|
|
|
|
|
|
assign predpipe_d[PREDPIPESIZE-1:0]
|
|
= {i0_predict_fghr_d, i0_predict_index_d, i0_predict_btag_d};
|
|
|
|
|
|
assign i0_rs1_bypass_en_d = dec_i0_rs1_bypass_en_d[0] | dec_i0_rs1_bypass_en_d[1] | dec_i0_rs1_bypass_en_d[2] | dec_i0_rs1_bypass_en_d[3];
|
|
assign i0_rs2_bypass_en_d = dec_i0_rs2_bypass_en_d[0] | dec_i0_rs2_bypass_en_d[1] | dec_i0_rs2_bypass_en_d[2] | dec_i0_rs2_bypass_en_d[3];
|
|
|
|
assign i0_rs1_bypass_data_d[31:0]=({32{dec_i0_rs1_bypass_en_d[0]}} & dec_i0_result_r[31:0] ) |
|
|
({32{dec_i0_rs1_bypass_en_d[1]}} & lsu_result_m[31:0] ) |
|
|
({32{dec_i0_rs1_bypass_en_d[2]}} & exu_i0_result_x[31:0] ) |
|
|
({32{dec_i0_rs1_bypass_en_d[3]}} & lsu_nonblock_load_data[31:0]);
|
|
|
|
assign i0_rs2_bypass_data_d[31:0]=({32{dec_i0_rs2_bypass_en_d[0]}} & dec_i0_result_r[31:0] ) |
|
|
({32{dec_i0_rs2_bypass_en_d[1]}} & lsu_result_m[31:0] ) |
|
|
({32{dec_i0_rs2_bypass_en_d[2]}} & exu_i0_result_x[31:0] ) |
|
|
({32{dec_i0_rs2_bypass_en_d[3]}} & lsu_nonblock_load_data[31:0]);
|
|
|
|
|
|
assign i0_rs1_d[31:0] = ({32{ i0_rs1_bypass_en_d }} & i0_rs1_bypass_data_d[31:0]) |
|
|
({32{~i0_rs1_bypass_en_d & dec_i0_select_pc_d }} & {dec_i0_pc_d[31:1],1'b0} ) | // for jal's
|
|
({32{~i0_rs1_bypass_en_d & dec_debug_wdata_rs1_d }} & dbg_cmd_wrdata[31:0] ) |
|
|
({32{~i0_rs1_bypass_en_d & ~dec_debug_wdata_rs1_d & dec_i0_rs1_en_d}} & gpr_i0_rs1_d[31:0] );
|
|
|
|
assign i0_rs2_d[31:0] = ({32{~i0_rs2_bypass_en_d & dec_i0_rs2_en_d}} & gpr_i0_rs2_d[31:0] ) |
|
|
({32{~i0_rs2_bypass_en_d }} & dec_i0_immed_d[31:0] ) |
|
|
({32{ i0_rs2_bypass_en_d }} & i0_rs2_bypass_data_d[31:0]);
|
|
|
|
|
|
assign exu_lsu_rs1_d[31:0] = ({32{~i0_rs1_bypass_en_d & ~dec_extint_stall & dec_i0_rs1_en_d & dec_qual_lsu_d}} & gpr_i0_rs1_d[31:0] ) |
|
|
({32{ i0_rs1_bypass_en_d & ~dec_extint_stall & dec_qual_lsu_d}} & i0_rs1_bypass_data_d[31:0]) |
|
|
({32{ dec_extint_stall & dec_qual_lsu_d}} & {dec_tlu_meihap[31:2],2'b0});
|
|
|
|
assign exu_lsu_rs2_d[31:0] = ({32{~i0_rs2_bypass_en_d & ~dec_extint_stall & dec_i0_rs2_en_d & dec_qual_lsu_d}} & gpr_i0_rs2_d[31:0] ) |
|
|
({32{ i0_rs2_bypass_en_d & ~dec_extint_stall & dec_qual_lsu_d}} & i0_rs2_bypass_data_d[31:0]);
|
|
|
|
|
|
assign muldiv_rs1_d[31:0] = ({32{~i0_rs1_bypass_en_d & dec_i0_rs1_en_d}} & gpr_i0_rs1_d[31:0] ) |
|
|
({32{ i0_rs1_bypass_en_d }} & i0_rs1_bypass_data_d[31:0]);
|
|
|
|
|
|
assign x_data_en = dec_data_en[1];
|
|
assign x_data_en_q1 = dec_data_en[1] & dec_csr_ren_d;
|
|
assign x_data_en_q2 = dec_data_en[1] & dec_i0_branch_d;
|
|
assign r_data_en = dec_data_en[0];
|
|
assign r_data_en_q2 = dec_data_en[0] & i0_branch_x;
|
|
assign x_ctl_en = dec_ctl_en[1];
|
|
assign r_ctl_en = dec_ctl_en[0];
|
|
|
|
|
|
|
|
|
|
el2_exu_alu_ctl #(.pt(pt)) i_alu (.*,
|
|
.enable ( x_data_en ), // I
|
|
.pp_in ( i0_predict_newp_d ), // I
|
|
.valid_in ( dec_i0_alu_decode_d ), // I
|
|
.flush_upper_x ( i0_flush_upper_x ), // I
|
|
.flush_lower_r ( dec_tlu_flush_lower_r ), // I
|
|
.a_in ( i0_rs1_d[31:0] ), // I
|
|
.b_in ( i0_rs2_d[31:0] ), // I
|
|
.pc_in ( dec_i0_pc_d[31:1] ), // I
|
|
.brimm_in ( dec_i0_br_immed_d[12:1] ), // I
|
|
.ap ( i0_ap ), // I
|
|
.csr_ren_in ( dec_csr_ren_d ), // I
|
|
.csr_rddata_in ( dec_csr_rddata_d[31:0] ), // I
|
|
.result_ff ( alu_result_x[31:0] ), // O
|
|
.flush_upper_out ( i0_flush_upper_d ), // O
|
|
.flush_final_out ( exu_flush_final ), // O
|
|
.flush_path_out ( i0_flush_path_d[31:1] ), // O
|
|
.predict_p_out ( i0_predict_p_d ), // O
|
|
.pred_correct_out ( i0_pred_correct_upper_d ), // O
|
|
.pc_ff ( exu_i0_pc_x[31:1] )); // O
|
|
|
|
|
|
|
|
el2_exu_mul_ctl #(.pt(pt)) i_mul (.*,
|
|
.mul_p ( mul_p & {$bits(el2_mul_pkt_t){mul_p.valid}} ), // I
|
|
.rs1_in ( muldiv_rs1_d[31:0] & {32{mul_p.valid}} ), // I
|
|
.rs2_in ( i0_rs2_d[31:0] & {32{mul_p.valid}} ), // I
|
|
.result_x ( mul_result_x[31:0] )); // O
|
|
|
|
|
|
|
|
el2_exu_div_ctl #(.pt(pt)) i_div (.*,
|
|
.cancel ( dec_div_cancel ), // I
|
|
.dp ( div_p ), // I
|
|
.dividend ( muldiv_rs1_d[31:0] ), // I
|
|
.divisor ( i0_rs2_d[31:0] ), // I
|
|
.finish_dly ( exu_div_wren ), // O
|
|
.out ( exu_div_result[31:0] )); // O
|
|
|
|
|
|
|
|
assign exu_i0_result_x[31:0] = (mul_valid_x) ? mul_result_x[31:0] : alu_result_x[31:0];
|
|
|
|
|
|
|
|
|
|
always_comb begin
|
|
i0_predict_newp_d = dec_i0_predict_p_d;
|
|
i0_predict_newp_d.boffset = dec_i0_pc_d[1]; // from the start of inst
|
|
end
|
|
|
|
|
|
assign exu_pmu_i0_br_misp = i0_pp_r.misp;
|
|
assign exu_pmu_i0_br_ataken = i0_pp_r.ataken;
|
|
assign exu_pmu_i0_pc4 = i0_pp_r.pc4;
|
|
|
|
|
|
assign i0_valid_d = i0_predict_p_d.valid & dec_i0_alu_decode_d & ~dec_tlu_flush_lower_r;
|
|
assign i0_taken_d = (i0_predict_p_d.ataken & dec_i0_alu_decode_d);
|
|
|
|
if(pt.BTB_ENABLE==1) begin
|
|
// maintain GHR at D
|
|
assign ghr_d_ns[pt.BHT_GHR_SIZE-1:0]
|
|
= ({pt.BHT_GHR_SIZE{~dec_tlu_flush_lower_r & i0_valid_d}} & {ghr_d[pt.BHT_GHR_SIZE-2:0], i0_taken_d}) |
|
|
({pt.BHT_GHR_SIZE{~dec_tlu_flush_lower_r & ~i0_valid_d}} & ghr_d[pt.BHT_GHR_SIZE-1:0] ) |
|
|
({pt.BHT_GHR_SIZE{ dec_tlu_flush_lower_r }} & ghr_x[pt.BHT_GHR_SIZE-1:0] );
|
|
|
|
// maintain GHR at X
|
|
assign ghr_x_ns[pt.BHT_GHR_SIZE-1:0]
|
|
= ({pt.BHT_GHR_SIZE{ i0_valid_x}} & {ghr_x[pt.BHT_GHR_SIZE-2:0], i0_taken_x}) |
|
|
({pt.BHT_GHR_SIZE{~i0_valid_x}} & ghr_x[pt.BHT_GHR_SIZE-1:0] ) ;
|
|
|
|
|
|
assign exu_i0_br_valid_r = i0_pp_r.valid;
|
|
assign exu_i0_br_mp_r = i0_pp_r.misp;
|
|
assign exu_i0_br_way_r = i0_pp_r.way;
|
|
assign exu_i0_br_hist_r[1:0] = {2{i0_pp_r.valid}} & i0_pp_r.hist[1:0];
|
|
assign exu_i0_br_error_r = i0_pp_r.br_error;
|
|
assign exu_i0_br_middle_r = i0_pp_r.pc4 ^ i0_pp_r.boffset;
|
|
assign exu_i0_br_start_error_r = i0_pp_r.br_start_error;
|
|
|
|
assign {exu_i0_br_fghr_r[pt.BHT_GHR_SIZE-1:0],
|
|
exu_i0_br_index_r[pt.BTB_ADDR_HI:pt.BTB_ADDR_LO]}= predpipe_r[PREDPIPESIZE-1:pt.BTB_BTAG_SIZE];
|
|
|
|
|
|
assign final_predict_mp = (i0_flush_upper_x) ? i0_predict_p_x : '0;
|
|
|
|
assign final_predpipe_mp[PREDPIPESIZE-1:0] = (i0_flush_upper_x) ? predpipe_x : '0;
|
|
|
|
assign after_flush_eghr[pt.BHT_GHR_SIZE-1:0] = (i0_flush_upper_x & ~dec_tlu_flush_lower_r) ? ghr_d[pt.BHT_GHR_SIZE-1:0] : ghr_x[pt.BHT_GHR_SIZE-1:0];
|
|
|
|
|
|
assign exu_mp_pkt.valid = final_predict_mp.valid;
|
|
assign exu_mp_pkt.way = final_predict_mp.way;
|
|
assign exu_mp_pkt.misp = final_predict_mp.misp;
|
|
assign exu_mp_pkt.pcall = final_predict_mp.pcall;
|
|
assign exu_mp_pkt.pja = final_predict_mp.pja;
|
|
assign exu_mp_pkt.pret = final_predict_mp.pret;
|
|
assign exu_mp_pkt.ataken = final_predict_mp.ataken;
|
|
assign exu_mp_pkt.boffset = final_predict_mp.boffset;
|
|
assign exu_mp_pkt.pc4 = final_predict_mp.pc4;
|
|
assign exu_mp_pkt.hist[1:0] = final_predict_mp.hist[1:0];
|
|
assign exu_mp_pkt.toffset[11:0] = final_predict_mp.toffset[11:0];
|
|
|
|
assign exu_mp_fghr[pt.BHT_GHR_SIZE-1:0] = after_flush_eghr[pt.BHT_GHR_SIZE-1:0];
|
|
|
|
assign {exu_mp_index[pt.BTB_ADDR_HI:pt.BTB_ADDR_LO],
|
|
exu_mp_btag[pt.BTB_BTAG_SIZE-1:0]} = final_predpipe_mp[PREDPIPESIZE-pt.BHT_GHR_SIZE-1:0];
|
|
|
|
assign exu_mp_eghr[pt.BHT_GHR_SIZE-1:0] = final_predpipe_mp[PREDPIPESIZE-1:pt.BTB_ADDR_HI-pt.BTB_ADDR_LO+pt.BTB_BTAG_SIZE+1]; // mp ghr for bht write
|
|
end // if (pt.BTB_ENABLE==1)
|
|
else begin
|
|
assign ghr_d_ns = '0;
|
|
assign ghr_x_ns = '0;
|
|
assign exu_mp_pkt = '0;
|
|
assign exu_mp_eghr = '0;
|
|
assign exu_mp_fghr = '0;
|
|
assign exu_mp_index = '0;
|
|
assign exu_mp_btag = '0;
|
|
assign exu_i0_br_hist_r = '0;
|
|
assign exu_i0_br_error_r = '0;
|
|
assign exu_i0_br_start_error_r = '0;
|
|
assign exu_i0_br_index_r = '0;
|
|
assign exu_i0_br_valid_r = '0;
|
|
assign exu_i0_br_mp_r = '0;
|
|
assign exu_i0_br_middle_r = '0;
|
|
assign exu_i0_br_fghr_r = '0;
|
|
assign exu_i0_br_way_r = '0;
|
|
end // else: !if(pt.BTB_ENABLE==1)
|
|
|
|
assign exu_flush_path_final[31:1] = ( {31{ dec_tlu_flush_lower_r }} & dec_tlu_flush_path_r[31:1] ) |
|
|
( {31{~dec_tlu_flush_lower_r & i0_flush_upper_d}} & i0_flush_path_d[31:1] );
|
|
|
|
assign exu_npc_r[31:1] = (i0_pred_correct_upper_r) ? pred_correct_npc_r[31:1] : i0_flush_path_upper_r[31:1];
|
|
|
|
|
|
endmodule // el2_exu
|