# This file was generated using idf.py save-defconfig. It can be edited manually.
# Espressif IoT Development Framework (ESP-IDF)  Project Minimal Configuration
#

CONFIG_TINYUSB_MSC_ENABLED=y

CONFIG_IDF_TARGET="esp32s3"
CONFIG_ESPTOOLPY_FLASHSIZE_16MB=y
CONFIG_FATFS_LFN_HEAP=y
CONFIG_FATFS_CODEPAGE_936=y
CONFIG_FATFS_API_ENCODING_UTF_8=y
CONFIG_FATFS_VFS_FSTAT_BLKSIZE=4096

CONFIG_PARTITION_TABLE_CUSTOM=y
CONFIG_SPIRAM=y
CONFIG_SPIRAM_MODE_OCT=y
CONFIG_SPIRAM_SPEED_80M=y
CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_240=y
CONFIG_ESP32S3_INSTRUCTION_CACHE_32KB=y
CONFIG_ESP32S3_DATA_CACHE_64KB=y
CONFIG_ESP32S3_DATA_CACHE_LINE_64B=y
CONFIG_SPIFFS_OBJ_NAME_LEN=128
CONFIG_LV_COLOR_16_SWAP=y
CONFIG_LV_MEM_CUSTOM=y
CONFIG_LV_FONT_MONTSERRAT_20=y
CONFIG_LV_FONT_MONTSERRAT_24=y
CONFIG_LV_FONT_MONTSERRAT_32=y
CONFIG_LV_USE_GIF=y
CONFIG_CODEC_I2C_BACKWARD_COMPATIBLE=y


CONFIG_BT_ENABLED=y
CONFIG_BT_BLUEDROID_ENABLED=y
CONFIG_BT_MODE_BLE=y


# Component config → Power Management
CONFIG_PM_ENABLE=y                          # 启用电源管理
CONFIG_PM_DFS_INIT_AUTO=y                   # 自动动态频率调节
CONFIG_PM_PROFILING=y                       # 功耗分析（可选）

# Component config → FreeRTOS
CONFIG_FREERTOS_USE_TICKLESS_IDLE=y         # 启用 tickless 空闲模式
CONFIG_FREERTOS_TICKLESS_IDLE_C1=y          # CPU0 空闲时进入 Light Sleep
CONFIG_FREERTOS_TICKLESS_IDLE_C2=y          # CPU1 空闲时进入 Light Sleep
CONFIG_FREERTOS_IDLE_TIME_BEFORE_SLEEP=2    # 空闲等待时间（单位：tick）

# Component config → ESP System Settings
CONFIG_ESP_SYSTEM_PM_IDLE_SLEEP_MODE=1      # 0:无睡眠 1:Light Sleep


CONFIG_FREERTOS_UNICORE=n
CONFIG_FREERTOS_HZ=1000
CONFIG_I2S_ISR_IRAM_SAFE=y
CONFIG_I2S_SUPPRESS_DEPRECATE_WARN=y
CONFIG_ESP32S3_INSTRUCTION_CACHE_16KB=y
CONFIG_ESP32S3_DATA_CACHE_32KB=y
CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_32B=y
CONFIG_ESP32S3_DATA_CACHE_LINE_32B=y



#
# ESP Speech Recognition
#
#CONFIG_MODEL_IN_FLASH=y
#CONFIG_USE_AFE=y
#CONFIG_AFE_INTERFACE_V1=y
#CONFIG_USE_NSNET=y
#CONFIG_SR_NSN_NSNET2=y
# end of ESP Speech Recognition