Add icebreaker example PicoSoC implementation

Signed-off-by: Clifford Wolf <clifford@clifford.at>

picosoc/.gitignore

@@ -1,8 +1,5 @@
 /spiflash_tb.vcd
 /spiflash_tb.vvp
-/firmware.elf
-/firmware.hex
-/firmware.bin
 /hx8kdemo.asc
 /hx8kdemo.bin
 /hx8kdemo.blif
@@ -11,6 +8,9 @@
 /hx8kdemo_syn.v
 /hx8kdemo_syn_tb.vvp
 /hx8kdemo_tb.vvp
+/hx8kdemo_fw.elf
+/hx8kdemo_fw.hex
+/hx8kdemo_fw.bin
 /icebreaker.asc
 /icebreaker.bin
 /icebreaker.json
@@ -19,5 +19,8 @@
 /icebreaker_syn.v
 /icebreaker_syn_tb.vvp
 /icebreaker_tb.vvp
+/icebreaker_fw.elf
+/icebreaker_fw.hex
+/icebreaker_fw.bin
 /testbench.vcd
 /cmos.log

picosoc/Makefile

@@ -33,6 +33,15 @@ hx8kprog: hx8kdemo.bin firmware.bin
 hx8kprog_fw: firmware.bin
 	iceprog -o 1M firmware.bin
 
+hx8kdemo_fw.elf: sections.lds start.s firmware.c
+	riscv32-unknown-elf-gcc -DHX8KDEMO -march=rv32imc -Wl,-Bstatic,-T,sections.lds,--strip-debug -ffreestanding -nostdlib -o hx8kdemo_fw.elf start.s firmware.c
+
+hx8kdemo_fw.hex: hx8kdemo_fw.elf
+	riscv32-unknown-elf-objcopy -O verilog hx8kdemo_fw.elf hx8kdemo_fw.hex
+
+hx8kdemo_fw.bin: hx8kdemo_fw.elf
+	riscv32-unknown-elf-objcopy -O binary hx8kdemo_fw.elf hx8kdemo_fw.bin
+
 # ---- iCE40 IceBreaker Board ----
 
 icebsim: icebreaker_tb.vvp firmware.hex
@@ -60,23 +69,21 @@ icebreaker.bin: icebreaker.asc
 	icetime -d up5k -c 12 -mtr icebreaker.rpt icebreaker.asc
 	icepack icebreaker.asc icebreaker.bin
 
-icebprog: icebreaker.bin firmware.bin
+icebprog: icebreaker.bin icebreaker_fw.bin
 	iceprog icebreaker.bin
-	iceprog -o 1M firmware.bin
+	iceprog -o 1M icebreaker_fw.bin
 
-icebprog_fw: firmware.bin
+icebprog_fw: icebreaker_fw.bin
-	iceprog -o 1M firmware.bin
+	iceprog -o 1M icebreaker_fw.bin
 
-# ---- Example Firmware ----
+icebreaker_fw.elf: sections.lds start.s firmware.c
+	riscv32-unknown-elf-gcc -DICEBREAKER -march=rv32ic -Wl,-Bstatic,-T,sections.lds,--strip-debug -ffreestanding -nostdlib -o icebreaker_fw.elf start.s firmware.c
 
-firmware.elf: sections.lds start.s firmware.c
+icebreaker_fw.hex: icebreaker_fw.elf
-	riscv32-unknown-elf-gcc -march=rv32ic -Wl,-Bstatic,-T,sections.lds,--strip-debug -ffreestanding -nostdlib -o firmware.elf start.s firmware.c
+	riscv32-unknown-elf-objcopy -O verilog icebreaker_fw.elf icebreaker_fw.hex
 
-firmware.hex: firmware.elf
+icebreaker_fw.bin: icebreaker_fw.elf
-	riscv32-unknown-elf-objcopy -O verilog firmware.elf firmware.hex
+	riscv32-unknown-elf-objcopy -O binary icebreaker_fw.elf icebreaker_fw.bin
-
-firmware.bin: firmware.elf
-	riscv32-unknown-elf-objcopy -O binary firmware.elf firmware.bin
 
 # ---- Testbench for SPI Flash Model ----
 
@@ -95,7 +102,8 @@ cmos.log: spimemio.v simpleuart.v picosoc.v ../picorv32.v
 
 clean:
 	rm -f testbench.vvp testbench.vcd spiflash_tb.vvp spiflash_tb.vcd
-	rm -f firmware.elf firmware.hex firmware.bin cmos.log
+	rm -f hx8kdemo_fw.elf hx8kdemo_fw.hex hx8kdemo_fw.bin cmos.log
+	rm -f icebreaker_fw.elf icebreaker_fw.hex icebreaker_fw.bin
 	rm -f hx8kdemo.blif hx8kdemo.log hx8kdemo.asc hx8kdemo.rpt hx8kdemo.bin
 	rm -f hx8kdemo_syn.v hx8kdemo_syn_tb.vvp hx8kdemo_tb.vvp
 	rm -f icebreaker.json icebreaker.log icebreaker.asc icebreaker.rpt icebreaker.bin

picosoc/README.md

@@ -20,13 +20,16 @@ The reset vector is set to 0x00100000, i.e. at 1MB into in the flash memory.
 See the included demo firmware and linker script for how to build a firmware
 image for this system.
 
-Run `make test` to run the test bench (and create `testbench.vcd`).
+Run `make hx8ksim` or `make icebsim` to run the test bench (and create `testbench.vcd`).
 
-Run `make prog` to build the configuration bit-stream and firmware images
+Run `make hx8kprog` to build the configuration bit-stream and firmware images
 and upload them to a connected iCE40-HX8K Breakout Board.
 
+Run `make icebprog` to build the configuration bit-stream and firmware images
+and upload them to a connected iCEBreaker Board.
+
 | File                              | Description                                                     |
-| ----------------------------- | --------------------------------------------------------------- |
+| --------------------------------- | --------------------------------------------------------------- |
 | [picosoc.v](picosoc.v)            | Top-level PicoSoC Verilog module                                |
 | [spimemio.v](spimemio.v)          | Memory controller that interfaces to external SPI flash         |
 | [simpleuart.v](simpleuart.v)      | Simple UART core connected directly to SoC TX/RX lines          |
@@ -35,6 +38,10 @@ and upload them to a connected iCE40-HX8K Breakout Board.
 | [sections.lds](sections.lds)      | Linker script for firmware.hex/firmware.bin                     |
 | [hx8kdemo.v](hx8kdemo.v)          | FPGA-based example implementation on iCE40-HX8K Breakout Board  |
 | [hx8kdemo.pcf](hx8kdemo.pcf)      | Pin constraints for implementation on iCE40-HX8K Breakout Board |
+| [hx8kdemo\_tb.v](hx8kdemo_tb.v)   | Testbench for implementation on iCE40-HX8K Breakout Board       |
+| [icebreaker.v](hx8kdemo.v)        | FPGA-based example implementation on iCEBreaker Board           |
+| [icebreaker.pcf](hx8kdemo.pcf)    | Pin constraints for implementation on iCEBreaker Board          |
+| [icebreaker\_tb.v](hx8kdemo_tb.v) | Testbench for implementation on iCEBreaker Board                |
 
 ### Memory map:
 

picosoc/firmware.c

@@ -1,6 +1,29 @@
+/*
+ *  PicoSoC - A simple example SoC using PicoRV32
+ *
+ *  Copyright (C) 2017  Clifford Wolf <clifford@clifford.at>
+ *
+ *  Permission to use, copy, modify, and/or distribute this software for any
+ *  purpose with or without fee is hereby granted, provided that the above
+ *  copyright notice and this permission notice appear in all copies.
+ *
+ *  THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ *  WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ *  ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ *  WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ *  ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ *  OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
 #include <stdint.h>
 #include <stdbool.h>
 
+#if !defined(ICEBREAKER) && !defined(HX8KDEMO)
+#  error "Set -DICEBREAKER or -DHX8KDEMO when compiling firmware.c"
+#endif
+
 // a pointer to this is a null pointer, but the compiler does not
 // know that because "sram" is a linker symbol from sections.lds.
 extern uint32_t sram;
@@ -28,11 +51,10 @@ void flashio(uint8_t *data, int len, uint8_t wrencmd)
 	((void(*)(uint8_t*, uint32_t, uint32_t))func)(data, len, wrencmd);
 }
 
+#ifdef HX8KBOARD
 void set_flash_qspi_flag()
 {
 	uint8_t buffer[8];
-
-#if 1
 	uint32_t addr_cr1v = 0x800002;
 
 	// Read Any Register (RDAR 65h)
@@ -52,26 +74,26 @@ void set_flash_qspi_flag()
 	buffer[3] = addr_cr1v;
 	buffer[4] = cr1v | 2; // Enable QSPI
 	flashio(buffer, 5, 0x06);
-#else
+}
-	// Read Status Register 1 (RDSR1 05h)
+#endif
-	buffer[0] = 0x05;
+
-	buffer[1] = 0x00; // rdata
+#ifdef ICEBREAKER
-	flashio(buffer, 2, 0);
+void set_flash_qspi_flag()
-	uint8_t sr1v = buffer[1];
+{
+	uint8_t buffer[8];
 
 	// Read Configuration Registers (RDCR1 35h)
 	buffer[0] = 0x35;
 	buffer[1] = 0x00; // rdata
 	flashio(buffer, 2, 0);
-	uint8_t cr1v = buffer[1];
+	uint8_t sr2 = buffer[1];
 
-	// Write Enable (WREN 06h) + Write Registers (WRR 01h)
+	// Write Enable Volatile (50h) + Write Status Register 2 (31h)
-	buffer[0] = 0x01;
+	buffer[0] = 0x31;
-	buffer[1] = sr1v;
+	buffer[1] = sr2 | 2; // Enable QSPI
-	buffer[2] = cr1v | 2; // Enable QSPI
+	flashio(buffer, 2, 0x50);
-	flashio(buffer, 3, 0x06);
-#endif
 }
+#endif
 
 void set_flash_latency(uint8_t value)
 {
@@ -185,6 +207,7 @@ void cmd_read_flash_id()
 
 // --------------------------------------------------------
 
+#ifdef HX8KDEMO
 uint8_t cmd_read_flash_regs_print(uint32_t addr, const char *name)
 {
 	set_flash_latency(8);
@@ -213,6 +236,70 @@ void cmd_read_flash_regs()
 	uint8_t cr3v = cmd_read_flash_regs_print(0x800004, "CR3V");
 	uint8_t vdlp = cmd_read_flash_regs_print(0x800005, "VDLP");
 }
+#endif
+
+#ifdef ICEBREAKER
+uint8_t cmd_read_flash_reg(uint8_t cmd)
+{
+	set_flash_latency(8);
+
+	uint8_t buffer[2] = {cmd, 0};
+	flashio(buffer, 2, 0);
+	return buffer[1];
+}
+
+void print_reg_bit(int val, const char *name)
+{
+	for (int i = 0; i < 12; i++) {
+		if (*name == 0)
+			putchar(' ');
+		else
+			putchar(*(name++));
+	}
+
+	putchar(val ? '1' : '0');
+	putchar('\n');
+}
+
+void cmd_read_flash_regs()
+{
+	putchar('\n');
+
+	uint8_t sr1 = cmd_read_flash_reg(0x05);
+	uint8_t sr2 = cmd_read_flash_reg(0x35);
+	uint8_t sr3 = cmd_read_flash_reg(0x15);
+
+	print_reg_bit(sr1 & 0x01, "S0  (BUSY)");
+	print_reg_bit(sr1 & 0x02, "S1  (WEL)");
+	print_reg_bit(sr1 & 0x04, "S2  (BP0)");
+	print_reg_bit(sr1 & 0x08, "S3  (BP1)");
+	print_reg_bit(sr1 & 0x10, "S4  (BP2)");
+	print_reg_bit(sr1 & 0x20, "S5  (TB)");
+	print_reg_bit(sr1 & 0x40, "S6  (SEC)");
+	print_reg_bit(sr1 & 0x80, "S7  (SRP)");
+	putchar('\n');
+
+	print_reg_bit(sr2 & 0x01, "S8  (SRL)");
+	print_reg_bit(sr2 & 0x02, "S9  (QE)");
+	print_reg_bit(sr2 & 0x04, "S10 ----");
+	print_reg_bit(sr2 & 0x08, "S11 (LB1)");
+	print_reg_bit(sr2 & 0x10, "S12 (LB2)");
+	print_reg_bit(sr2 & 0x20, "S13 (LB3)");
+	print_reg_bit(sr2 & 0x40, "S14 (CMP)");
+	print_reg_bit(sr2 & 0x80, "S15 (SUS)");
+	putchar('\n');
+
+	print_reg_bit(sr3 & 0x01, "S16 ----");
+	print_reg_bit(sr3 & 0x02, "S17 ----");
+	print_reg_bit(sr3 & 0x04, "S18 (WPS)");
+	print_reg_bit(sr3 & 0x08, "S19 ----");
+	print_reg_bit(sr3 & 0x10, "S20 ----");
+	print_reg_bit(sr3 & 0x20, "S21 (DRV0)");
+	print_reg_bit(sr3 & 0x40, "S22 (DRV1)");
+	print_reg_bit(sr3 & 0x80, "S23 (HOLD)");
+	putchar('\n');
+}
+#endif
 
 // --------------------------------------------------------
 
@@ -483,4 +570,3 @@ void main()
 		}
 	}
 }
-

picosoc/spiflash.v

@@ -32,6 +32,9 @@
 //    Cypress S25FL064L http://www.cypress.com/file/316661/download
 //    Cypress S25FL128L http://www.cypress.com/file/316171/download
 //
+// SPI flash used on iCEBreaker board:
+//    https://www.winbond.com/resource-files/w25q128jv%20dtr%20revb%2011042016.pdf
+//
 
 module spiflash (
 	input csb,