Added TWO_CYCLE_COMPARE

This commit is contained in:
Clifford Wolf 2015-07-07 22:51:52 +02:00
parent 54f89ba904
commit b6c4c2eeb9
2 changed files with 29 additions and 8 deletions

View File

@ -165,6 +165,12 @@ of 4 bits and then shift in units of 1 bit. This speeds up shift operations,
but adds additional hardware. Set this parameter to 0 to disable the two-stage
shift to further reduce the size of the core.
#### TWO_CYCLE_COMPARE (default = 0)
This relaxes the longest data path a bit by adding an additional FF stage
at the cost of adding an additional clock cycle delay to the conditional
branch instructions.
#### CATCH_MISALIGN (default = 1)
Set this to 0 to disable the circuitry for catching misaligned memory

View File

@ -37,6 +37,7 @@ module picorv32 #(
parameter [ 0:0] ENABLE_REGS_DUALPORT = 1,
parameter [ 0:0] LATCHED_MEM_RDATA = 0,
parameter [ 0:0] TWO_STAGE_SHIFT = 1,
parameter [ 0:0] TWO_CYCLE_COMPARE = 0,
parameter [ 0:0] CATCH_MISALIGN = 1,
parameter [ 0:0] CATCH_ILLINSN = 1,
parameter [ 0:0] ENABLE_PCPI = 0,
@ -93,7 +94,7 @@ module picorv32 #(
localparam WITH_PCPI = ENABLE_PCPI || ENABLE_MUL;
reg [63:0] count_cycle, count_instr;
reg [31:0] reg_pc, reg_next_pc, reg_op1, reg_op2, reg_out, reg_alu_out;
reg [31:0] reg_pc, reg_next_pc, reg_op1, reg_op2, reg_out;
reg [31:0] cpuregs [0:regfile_size-1];
reg [4:0] reg_sh;
@ -529,8 +530,9 @@ module picorv32 #(
reg [31:0] next_irq_pending;
reg do_waitirq;
reg [31:0] alu_out;
reg alu_out_0;
reg [31:0] alu_out, reg_alu_out;
reg alu_out_0, reg_alu_out_0;
reg alu_wait;
always @* begin
alu_out_0 = 'bx;
@ -577,6 +579,8 @@ module picorv32 #(
set_mem_do_wdata = 0;
reg_alu_out <= alu_out;
reg_alu_out_0 <= alu_out_0;
alu_wait <= 0;
if (WITH_PCPI && CATCH_ILLINSN) begin
if (resetn && pcpi_valid && !pcpi_int_wait) begin
@ -846,6 +850,9 @@ module picorv32 #(
cpu_state <= cpu_state_shift;
end
default: begin
if (TWO_CYCLE_COMPARE && is_beq_bne_blt_bge_bltu_bgeu)
alu_wait <= 1;
else
mem_do_rinst <= mem_do_prefetch;
cpu_state <= cpu_state_exec;
end
@ -889,6 +896,9 @@ module picorv32 #(
cpu_state <= cpu_state_shift;
end
default: begin
if (TWO_CYCLE_COMPARE && is_beq_bne_blt_bge_bltu_bgeu)
alu_wait <= 1;
else
mem_do_rinst <= mem_do_prefetch;
cpu_state <= cpu_state_exec;
end
@ -896,14 +906,17 @@ module picorv32 #(
end
cpu_state_exec: begin
latched_store <= alu_out_0;
latched_branch <= alu_out_0;
latched_store <= TWO_CYCLE_COMPARE ? reg_alu_out_0 : alu_out_0;
latched_branch <= TWO_CYCLE_COMPARE ? reg_alu_out_0 : alu_out_0;
reg_out <= reg_pc + decoded_imm;
if (TWO_CYCLE_COMPARE && alu_wait) begin
mem_do_rinst <= mem_do_prefetch;
end else
if (is_beq_bne_blt_bge_bltu_bgeu) begin
latched_rd <= 0;
if (mem_done)
cpu_state <= cpu_state_fetch;
if (alu_out_0) begin
if (TWO_CYCLE_COMPARE ? reg_alu_out_0 : alu_out_0) begin
decoder_trigger <= 0;
set_mem_do_rinst = 1;
end
@ -1173,6 +1186,7 @@ module picorv32_axi #(
parameter [ 0:0] ENABLE_REGS_16_31 = 1,
parameter [ 0:0] ENABLE_REGS_DUALPORT = 1,
parameter [ 0:0] TWO_STAGE_SHIFT = 1,
parameter [ 0:0] TWO_CYCLE_COMPARE = 0,
parameter [ 0:0] CATCH_MISALIGN = 1,
parameter [ 0:0] CATCH_ILLINSN = 1,
parameter [ 0:0] ENABLE_PCPI = 0,
@ -1268,6 +1282,7 @@ module picorv32_axi #(
.ENABLE_REGS_16_31 (ENABLE_REGS_16_31 ),
.ENABLE_REGS_DUALPORT(ENABLE_REGS_DUALPORT),
.TWO_STAGE_SHIFT (TWO_STAGE_SHIFT ),
.TWO_CYCLE_COMPARE (TWO_CYCLE_COMPARE ),
.CATCH_MISALIGN (CATCH_MISALIGN ),
.CATCH_ILLINSN (CATCH_ILLINSN ),
.ENABLE_PCPI (ENABLE_PCPI ),