Added scripts/smt2-bmc/sync.*

This commit is contained in:
Clifford Wolf 2015-08-15 11:28:35 +02:00
parent ec0891326a
commit f227332a98
7 changed files with 312 additions and 5 deletions

View File

@ -1,6 +1,12 @@
__pycache__
debug.smt2
async_a.smt2
async_b.smt2
async_tb
async_tb.v
async_tb.vcd
sync_a.smt2
sync_b.smt2
sync_tb
sync_tb.v
sync_tb.vcd

View File

@ -22,6 +22,7 @@ def timestamp():
secs = int(time() - start_time)
return "+ %6d [%3d:%02d:%02d] " % (secs, secs // (60*60), (secs // 60) % 60, secs % 60)
print("Solver: %s" % solver)
smt.write("(set-logic QF_AUFBV)")
regs_a = list()
@ -310,7 +311,7 @@ for step in range(steps):
if words > 0:
print("running verilog test bench...")
os.system("iverilog -o async_tb -s testbench async_tb.v async.v ../../picorv32.v && ./async_tb")
os.system("iverilog -o async_tb -s testbench async_tb.v main.v ../../picorv32.v && ./async_tb")
break

View File

@ -1,4 +1,4 @@
read_verilog async.v
read_verilog main.v
read_verilog ../../picorv32.v
rename main main_a
chparam -set ENABLE_REGS_DUALPORT 0 \
@ -14,7 +14,7 @@ opt
write_smt2 -bv -mem -regs async_a.smt2
design -reset
read_verilog async.v
read_verilog main.v
read_verilog ../../picorv32.v
rename main main_b
chparam -set ENABLE_REGS_DUALPORT 1 \

View File

@ -2,11 +2,20 @@
module main (input clk, resetn, domem, output trap);
parameter integer MEMORY_WORDS = 2**30;
// timing parameters (vary for async test)
parameter [0:0] ENABLE_REGS_DUALPORT = 1;
parameter [0:0] TWO_STAGE_SHIFT = 1;
parameter [0:0] TWO_CYCLE_COMPARE = 0;
parameter [0:0] TWO_CYCLE_ALU = 0;
// isa parameters (vary for sync test)
parameter [0:0] ENABLE_COUNTERS = 0;
parameter [0:0] CATCH_MISALIGN = 1;
parameter [0:0] CATCH_ILLINSN = 1;
parameter [0:0] ENABLE_MUL = 0;
parameter [0:0] ENABLE_IRQ = 0;
(* keep *) wire mem_valid;
(* keep *) wire mem_ready;
(* keep *) wire [31:0] mem_addr;
@ -15,11 +24,18 @@ module main (input clk, resetn, domem, output trap);
(* keep *) wire [31:0] mem_rdata;
picorv32 #(
.ENABLE_COUNTERS ( 0),
// timing parameters
.ENABLE_REGS_DUALPORT(ENABLE_REGS_DUALPORT),
.TWO_STAGE_SHIFT (TWO_STAGE_SHIFT ),
.TWO_CYCLE_COMPARE (TWO_CYCLE_COMPARE ),
.TWO_CYCLE_ALU (TWO_CYCLE_ALU )
.TWO_CYCLE_ALU (TWO_CYCLE_ALU ),
// isa parameters
.ENABLE_COUNTERS(ENABLE_COUNTERS),
.CATCH_MISALIGN (CATCH_MISALIGN ),
.CATCH_ILLINSN (CATCH_ILLINSN ),
.ENABLE_MUL (ENABLE_MUL ),
.ENABLE_IRQ (ENABLE_IRQ )
) cpu (
.clk (clk ),
.resetn (resetn ),

252
scripts/smt2-bmc/sync.py Normal file
View File

@ -0,0 +1,252 @@
#!/usr/bin/python3
import os, sys, getopt
from time import time
from smtio import smtio
steps = 20
words = 0
solver = "yices"
allmem = False
debug_print = False
debug_file = open("debug.smt2", "w")
start_time = time()
smt = smtio(solver=solver, debug_print=debug_print, debug_file=debug_file)
def timestamp():
secs = int(time() - start_time)
return "+ %6d [%3d:%02d:%02d] " % (secs, secs // (60*60), (secs // 60) % 60, secs % 60)
print("Solver: %s" % solver)
smt.write("(set-logic QF_AUFBV)")
regs_a = list()
regs_b = list()
with open("sync_a.smt2", "r") as f:
for line in f:
if line.startswith("; yosys-smt2-register "):
line = line.split()
regs_a.append((line[2], int(line[3])))
else:
smt.write(line)
with open("sync_b.smt2", "r") as f:
for line in f:
if line.startswith("; yosys-smt2-register "):
line = line.split()
regs_b.append((line[2], int(line[3])))
else:
smt.write(line)
for step in range(steps):
smt.write("(declare-fun a%d () main_a_s)" % step)
smt.write("(declare-fun b%d () main_b_s)" % step)
smt.write("(assert (= (|main_a_n domem| a%d) (|main_b_n domem| b%d)))" % (step, step))
smt.write("(assert (not (|main_a_n trap| a%d)))" % step)
if step == 0:
# start with synced memory and register file
smt.write("(assert (= (|main_a_m cpu.cpuregs| a0) (|main_b_m cpu.cpuregs| b0)))")
smt.write("(assert (= (|main_a_m memory| a0) (|main_b_m memory| b0)))")
# reset in first cycle
smt.write("(assert (not (|main_a_n resetn| a%d)))" % step)
smt.write("(assert (not (|main_b_n resetn| b%d)))" % step)
else:
smt.write("(assert (main_a_t a%d a%d))" % (step-1, step))
smt.write("(assert (main_b_t b%d b%d))" % (step-1, step))
smt.write("(assert (|main_a_n resetn| a%d))" % step)
smt.write("(assert (|main_b_n resetn| b%d))" % step)
print("%s Checking sequence of length %d.." % (timestamp(), step))
smt.write("(push 1)")
smt.write(("(assert (or (distinct (|main_a_m cpu.cpuregs| a%d) (|main_b_m cpu.cpuregs| b%d)) " +
"(distinct (|main_a_m memory| a%d) (|main_b_m memory| b%d))" +
"(distinct (|main_a_n trap| a%d) (|main_b_n trap| b%d))))") % (step, step, step, step, step, step))
smt.write("(check-sat)")
if smt.read() == "sat":
print("%s Creating model.." % timestamp())
def make_cpu_regs(step):
for i in range(1, 32):
smt.write("(define-fun a%d_r%d () (_ BitVec 32) (select (|main_a_m cpu.cpuregs| a%d) #b%s))" % (step, i, step, bin(32+i)[3:]))
smt.write("(define-fun b%d_r%d () (_ BitVec 32) (select (|main_b_m cpu.cpuregs| b%d) #b%s))" % (step, i, step, bin(32+i)[3:]))
make_cpu_regs(0)
make_cpu_regs(step)
smt.write("(check-sat)")
assert smt.read() == "sat"
def print_status(mod, step):
resetn = smt.get_net_bool("main_" + mod, "resetn", "%s%d" % (mod, step))
memvld = smt.get_net_bool("main_" + mod, "mem_valid", "%s%d" % (mod, step))
domem = smt.get_net_bool("main_" + mod, "domem", "%s%d" % (mod, step))
memrdy = smt.get_net_bool("main_" + mod, "mem_ready", "%s%d" % (mod, step))
trap = smt.get_net_bool("main_" + mod, "trap", "%s%d" % (mod, step))
print("status %5s: resetn=%s, memvld=%s, domem=%s, memrdy=%s, trap=%s" % ("%s[%d]" % (mod, step), resetn, memvld, domem, memrdy, trap))
def print_mem_xfer(mod, step):
if allmem or smt.get("(and (|main_%s_n mem_valid| %s%d) (|main_%s_n mem_ready| %s%d))" % (mod, mod, step, mod, mod, step)) == 'true':
mem_addr = smt.get_net_hex("main_" + mod, "mem_addr", "%s%d" % (mod, step))
mem_wdata = smt.get_net_hex("main_" + mod, "mem_wdata", "%s%d" % (mod, step))
mem_wstrb = smt.get_net_bin("main_" + mod, "mem_wstrb", "%s%d" % (mod, step))
mem_rdata = smt.get_net_hex("main_" + mod, "mem_rdata", "%s%d" % (mod, step))
if allmem and smt.get("(and (|main_%s_n mem_valid| %s%d) (|main_%s_n mem_ready| %s%d))" % (mod, mod, step, mod, mod, step)) == 'true':
print("mem %5s: addr=%s, wdata=%s, wstrb=%s, rdata=%s <-" % ("%s[%d]" % (mod, step), mem_addr, mem_wdata, mem_wstrb, mem_rdata))
else:
print("mem %5s: addr=%s, wdata=%s, wstrb=%s, rdata=%s" % ("%s[%d]" % (mod, step), mem_addr, mem_wdata, mem_wstrb, mem_rdata))
def print_cpu_regs(step):
for i in range(1, 32):
ra = smt.bv2hex(smt.get("a%d_r%d" % (step, i)))
rb = smt.bv2hex(smt.get("b%d_r%d" % (step, i)))
print("%3s[%d]: A=%s B=%s%s" % ("x%d" % i, step, ra, rb, " !" if ra != rb else ""))
print()
print_cpu_regs(0)
print()
print_cpu_regs(step)
print()
for i in range(step+1):
print_status("a", i)
print()
for i in range(step+1):
print_status("b", i)
print()
for i in range(1, step+1):
print_mem_xfer("a", i)
print()
for i in range(1, step+1):
print_mem_xfer("b", i)
with open("sync_tb.v", "w") as f:
print()
print("writing verilog test bench...")
memory_words = 1
memory_datas = { "a": dict(), "b": dict() }
for i in range(step, 0, -1):
for mod in ["a", "b"]:
if allmem or smt.get("(and (|main_%s_n mem_valid| %s%d) (|main_%s_n mem_ready| %s%d))" % (mod, mod, i, mod, mod, i)) == 'true':
mem_addr = smt.get_net_hex("main_" + mod, "mem_addr", "%s%d" % (mod, i))
mem_rdata = smt.get_net_hex("main_" + mod, "mem_rdata", "%s%d" % (mod, i))
memory_datas[mod][mem_addr] = mem_rdata
memory_words = max((int(mem_addr, 16) >> 2)+1, memory_words)
memory_data = dict()
for k, v in memory_datas["a"].items(): memory_data[k] = v
for k, v in memory_datas["b"].items(): memory_data[k] = v
print("`timescale 1 ns / 1 ps", file=f)
print("", file=f)
print("module testbench;", file=f)
print(" reg clk = 1, resetn, domem_a, domem_b;", file=f)
print(" always #5 clk = ~clk;", file=f)
print("", file=f)
print(" main #(", file=f)
print(" .MEMORY_WORDS(%d)," % memory_words, file=f)
print(" /* FIXME */", file=f)
print(" ) main_a (", file=f)
print(" .clk(clk),", file=f)
print(" .resetn(resetn),", file=f)
print(" .domem(domem_a)", file=f)
print(" );", file=f)
print("", file=f)
print(" main #(", file=f)
print(" .MEMORY_WORDS(%d)," % memory_words, file=f)
print(" /* FIXME */", file=f)
print(" ) main_b (", file=f)
print(" .clk(clk),", file=f)
print(" .resetn(resetn),", file=f)
print(" .domem(domem_b)", file=f)
print(" );", file=f)
print("", file=f)
print(" task check_reg;", file=f)
print(" input [4:0] n;", file=f)
print(" begin", file=f)
print(" if (main_a.cpu.cpuregs[n] != main_b.cpu.cpuregs[n])", file=f)
print(" $display(\"Divergent values for reg %1d: A=%08x B=%08x\", n, main_a.cpu.cpuregs[n], main_b.cpu.cpuregs[n]);", file=f)
print(" end", file=f)
print(" endtask", file=f)
print("", file=f)
print(" task check_mem;", file=f)
print(" input [31:0] n;", file=f)
print(" begin", file=f)
print(" if (main_a.memory[n] != main_b.memory[n])", file=f)
print(" $display(\"Divergent values for memory addr %08x: A=%08x B=%08x\", n, main_a.cpu.cpuregs[n], main_b.cpu.cpuregs[n]);", file=f)
print(" end", file=f)
print(" endtask", file=f)
print("", file=f)
print(" initial begin", file=f)
print(" $dumpfile(\"sync_tb.vcd\");", file=f)
print(" $dumpvars(0, testbench);", file=f)
print("", file=f)
for rn, rs in regs_a:
print(" main_a.%s = %d'b %s;" % (rn, rs, smt.get_net_bin("main_a", rn, "a0")), file=f)
print("", file=f)
for rn, rs in regs_b:
print(" main_b.%s = %d'b %s;" % (rn, rs, smt.get_net_bin("main_b", rn, "b0")), file=f)
print("", file=f)
for i in range(1, 32):
ra = smt.bv2hex(smt.get("a%d_r%d" % (0, i)))
rb = smt.bv2hex(smt.get("b%d_r%d" % (0, i)))
print(" main_a.cpu.cpuregs[%2d] = 'h %s; main_b.cpu.cpuregs[%2d] = 'h %s;" % (i, ra, i, rb), file=f)
print("", file=f)
for addr, data in memory_data.items():
print(" main_a.memory['h %08x] = 'h %s;" % (int(addr, 16) >> 2, data), file=f)
print(" main_b.memory['h %08x] = 'h %s;" % (int(addr, 16) >> 2, data), file=f)
print("", file=f)
for i in range(step+1):
print(" resetn = %d;" % smt.get_net_bool("main_a", "resetn", "a%d" % i), file=f)
print(" domem_a = %d;" % smt.get_net_bool("main_a", "domem", "a%d" % i), file=f)
print(" domem_b = %d;" % smt.get_net_bool("main_b", "domem", "b%d" % i), file=f)
print(" @(posedge clk);", file=f)
print("", file=f)
for i in range(1, 32):
print(" check_reg(%d);" % i, file=f)
for addr, data in memory_data.items():
print(" check_mem('h %s);" % addr, file=f)
print("", file=f)
print(" @(posedge clk);", file=f)
print(" @(posedge clk);", file=f)
print(" $finish;", file=f)
print(" end", file=f)
print("endmodule", file=f)
if words > 0:
print("running verilog test bench...")
os.system("iverilog -o sync_tb -s testbench sync_tb.v main.v ../../picorv32.v && ./sync_tb")
break
else: # unsat
smt.write("(pop 1)")
smt.write("(assert (= (|main_a_m cpu.cpuregs| a%d) (|main_b_m cpu.cpuregs| b%d)))" % (step, step))
smt.write("(assert (= (|main_a_m memory| a%d) (|main_b_m memory| b%d)))" % (step, step))
smt.write("(assert (= (|main_a_n trap| a%d) (|main_b_n trap| b%d)))" % (step, step))
print("%s Done." % timestamp())
smt.write("(exit)")
smt.wait()

4
scripts/smt2-bmc/sync.sh Normal file
View File

@ -0,0 +1,4 @@
#!/bin/bash
set -ex
yosys -qv1 sync.ys
time python3 sync.py

28
scripts/smt2-bmc/sync.ys Normal file
View File

@ -0,0 +1,28 @@
read_verilog main.v
read_verilog ../../picorv32.v
rename main main_a
hierarchy -top main_a
proc
opt
memory -nordff -nomap
flatten
opt
write_smt2 -bv -mem -regs sync_a.smt2
design -reset
read_verilog main.v
read_verilog ../../picorv32.v
rename main main_b
chparam -set ENABLE_COUNTERS 1 \
-set CATCH_MISALIGN 0 \
-set CATCH_ILLINSN 0 \
-set ENABLE_MUL 1 \
-set ENABLE_IRQ 0 main_b
hierarchy -top main_b
proc
opt
memory -nordff -nomap
flatten
opt
write_smt2 -bv -mem -regs sync_b.smt2
design -reset