colin
/
picorv32
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Improve and cleanup picosoc firmware

This commit is contained in:
Clifford Wolf 2017-08-11 16:15:07 +02:00
parent 78f2f5efd2
commit febb4b1318
5 changed files with 40 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
picosoc/.gitignore vendored
View File

@ -3,7 +3,7 @@
/spiflash_tb.vcd /spiflash_tb.vcd
/spiflash_tb.vvp /spiflash_tb.vvp
/firmware.elf /firmware.elf
/firmware_vma.elf /firmware_up.elf
/firmware.hex /firmware.hex
/firmware.bin /firmware.bin
/hx8kdemo.asc /hx8kdemo.asc

14
picosoc/Makefile
View File

@ -46,14 +46,14 @@ hx8kdemo.bin: hx8kdemo.asc
# ---- Example Firmware ---- # ---- Example Firmware ----
firmware.elf: firmware.s firmware.elf: sections.lds firmware.S
riscv32-unknown-elf-gcc -c -o firmware.elf firmware.s riscv32-unknown-elf-gcc -Wl,-Bstatic,-T,sections.lds,--strip-debug -ffreestanding -nostdlib -o firmware.elf firmware.S
firmware_vma.elf: firmware.elf firmware_up.elf: firmware.elf
riscv32-unknown-elf-objcopy --change-section-vma .text=0x00100000 firmware.elf firmware_vma.elf riscv32-unknown-elf-objcopy --change-addresses 0x100000 firmware.elf firmware_up.elf
firmware.hex: firmware_vma.elf firmware.hex: firmware_up.elf
riscv32-unknown-elf-objcopy -O verilog firmware_vma.elf firmware.hex riscv32-unknown-elf-objcopy -O verilog firmware_up.elf firmware.hex
firmware.bin: firmware.elf firmware.bin: firmware.elf
riscv32-unknown-elf-objcopy -O binary firmware.elf firmware.bin riscv32-unknown-elf-objcopy -O binary firmware.elf firmware.bin
@ -62,7 +62,7 @@ firmware.bin: firmware.elf
clean: clean:
rm -f testbench.vvp testbench.vcd spiflash_tb.vvp spiflash_tb.vcd rm -f testbench.vvp testbench.vcd spiflash_tb.vvp spiflash_tb.vcd
rm -f firmware.elf firmware_vma.elf firmware.hex firmware.bin rm -f firmware.elf firmware_up.elf firmware.hex firmware.bin
rm -f hx8kdemo.blif hx8kdemo.log hx8kdemo.asc hx8kdemo.rpt hx8kdemo.bin rm -f hx8kdemo.blif hx8kdemo.log hx8kdemo.asc hx8kdemo.rpt hx8kdemo.bin
rm -f hx8kdemo_syn.v hx8kdemo_syn_tb.vvp hx8kdemo_tb.vvp rm -f hx8kdemo_syn.v hx8kdemo_syn_tb.vvp hx8kdemo_tb.vvp

31
picosoc/firmware.s → picosoc/firmware.S
View File

@ -1,5 +1,5 @@
# write RAM code (a sequence of nops followed by ret) // write RAM code (a sequence of nops followed by ret)
li x5,0x00000013 # nop li x5,0x00000013 // nop
sw x5,4(x0) sw x5,4(x0)
sw x5,8(x0) sw x5,8(x0)
sw x5,12(x0) sw x5,12(x0)
@ -48,38 +48,45 @@ sw x5,180(x0)
sw x5,184(x0) sw x5,184(x0)
sw x5,188(x0) sw x5,188(x0)
sw x5,192(x0) sw x5,192(x0)
li x5,0x00008067 # ret li x5,0x00008067 // ret
sw x5,196(x0) sw x5,196(x0)
# setup gpio address in x5 #if 0
// switch spimemio to continous qspi ddr mode
li x5,0x02000000
li x6,0x80000071
sw x6,0(x5)
#endif
// setup gpio address in x5
li x5,0x03000000 li x5,0x03000000
sw x0,0(x5) sw x0,0(x5)
# initial entry point into RAM code // initial entry point into RAM code
li x3,4 li x3,4
# initialize RAM counter // initialize RAM counter
sw x0,0(x0) sw x0,0(x0)
# start of loop. remember this address // start of loop. remember this address
auipc x4,0 auipc x4,0
# execute RAM code, come back here // execute RAM code, come back here
jalr x3 jalr x3
# load counter and increment // load counter and increment
lw x6,0(x0) lw x6,0(x0)
addi x6,x6,1 addi x6,x6,1
# store counter and update gpios // store counter and update gpios
sw x6,0(x5) sw x6,0(x5)
sw x6,0(x0) sw x6,0(x0)
# calculate new entry point into RAM code // calculate new entry point into RAM code
slli x3,x6,2 slli x3,x6,2
andi x3,x3,127 andi x3,x3,127
addi x3,x3,32 addi x3,x3,32
# execute RAM code, come back to start of loop // execute RAM code, come back to start of loop
mv x1,x4 mv x1,x4
jr x3 jr x3

8
picosoc/sections.lds Normal file
View File

@ -0,0 +1,8 @@
SECTIONS {
.memory : {
. = 0x000000;
start*(.text);
*(.text);
*(*);
}
}

5
picosoc/testbench.v
View File

@ -24,6 +24,10 @@ module testbench;
always #5 clk = (clk === 1'b0); always #5 clk = (clk === 1'b0);
reg resetn = 0; reg resetn = 0;
integer cycles = 0;
always @(posedge clk)
cycles <= cycles + 1;
initial begin initial begin
$dumpfile("testbench.vcd"); $dumpfile("testbench.vcd");
@ -92,6 +96,7 @@ module testbench;
$write("<GPIO:%02x>", gpio[7:0]); $write("<GPIO:%02x>", gpio[7:0]);
if (gpio == 63) begin if (gpio == 63) begin
$display("[OK]"); $display("[OK]");
$display("Finished after %0d cycles.", cycles);
$finish; $finish;
end end
if (gpio % 8 == 7) begin if (gpio % 8 == 7) begin