picorv32/scripts/presyn/testbench.v

82 lines
1.8 KiB
Verilog

module testbench;
reg clk = 1;
always #5 clk = ~clk;
reg resetn = 0;
always @(posedge clk) resetn <= 1;
wire trap;
wire mem_valid;
wire mem_instr;
reg mem_ready;
wire [31:0] mem_addr;
wire [31:0] mem_wdata;
wire [3:0] mem_wstrb;
reg [31:0] mem_rdata;
picorv32 UUT (
.clk (clk ),
.resetn (resetn ),
.trap (trap ),
.mem_valid(mem_valid),
.mem_instr(mem_instr),
.mem_ready(mem_ready),
.mem_addr (mem_addr ),
.mem_wdata(mem_wdata),
.mem_wstrb(mem_wstrb),
.mem_rdata(mem_rdata)
);
// 4096 32bit words = 16kB memory
localparam MEM_SIZE = 4096;
reg [31:0] memory [0:MEM_SIZE-1];
initial $readmemh("firmware.hex", memory);
always @(posedge clk) begin
mem_ready <= 0;
mem_rdata <= 'bx;
if (resetn && mem_valid && !mem_ready) begin
mem_ready <= 1;
if (mem_wstrb) begin
if (mem_addr == 32'h1000_0000) begin
$write("%c", mem_wdata[7:0]);
$fflush;
end else begin
if (mem_wstrb[0]) memory[mem_addr >> 2][ 7: 0] <= mem_wdata[ 7: 0];
if (mem_wstrb[1]) memory[mem_addr >> 2][15: 8] <= mem_wdata[15: 8];
if (mem_wstrb[2]) memory[mem_addr >> 2][23:16] <= mem_wdata[23:16];
if (mem_wstrb[3]) memory[mem_addr >> 2][31:24] <= mem_wdata[31:24];
end
end else begin
mem_rdata <= memory[mem_addr >> 2];
end
end
if (resetn && trap) begin
$display("TRAP.");
$finish;
end
end
initial begin
$dumpfile("testbench.vcd");
$dumpvars(0, testbench);
end
endmodule
module picorv32_regs (
input [4:0] A1ADDR, A2ADDR, B1ADDR,
output reg [31:0] A1DATA, A2DATA,
input [31:0] B1DATA,
input B1EN, CLK1
);
reg [31:0] memory [0:31];
always @(posedge CLK1) begin
A1DATA <= memory[A1ADDR];
A2DATA <= memory[A2ADDR];
if (B1EN) memory[B1ADDR] <= B1DATA;
end
endmodule