picorv32/scripts/smtbmc/notrap_validop.v

68 lines
1.7 KiB
Verilog

module testbench(input clk, mem_ready);
`include "opcode.v"
reg resetn = 0;
always @(posedge clk) resetn <= 1;
(* keep *) wire trap, mem_valid, mem_instr;
(* keep *) wire [3:0] mem_wstrb;
(* keep *) wire [31:0] mem_addr, mem_wdata, mem_rdata;
(* keep *) wire [35:0] trace_data;
reg [31:0] mem [0:2**30-1];
assign mem_rdata = mem[mem_addr >> 2];
always @(posedge clk) begin
if (resetn && mem_valid && mem_ready) begin
if (mem_wstrb[3]) mem[mem_addr >> 2][31:24] <= mem_wdata[31:24];
if (mem_wstrb[2]) mem[mem_addr >> 2][23:16] <= mem_wdata[23:16];
if (mem_wstrb[1]) mem[mem_addr >> 2][15: 8] <= mem_wdata[15: 8];
if (mem_wstrb[0]) mem[mem_addr >> 2][ 7: 0] <= mem_wdata[ 7: 0];
end
end
reg [1:0] mem_ready_stall = 0;
always @(posedge clk) begin
mem_ready_stall <= {mem_ready_stall, mem_valid && !mem_ready};
restrict(&mem_ready_stall == 0);
if (mem_instr && mem_ready && mem_valid) begin
assume(opcode_valid(mem_rdata));
assume(!opcode_branch(mem_rdata));
assume(!opcode_load(mem_rdata));
assume(!opcode_store(mem_rdata));
end
if (!mem_valid)
assume(!mem_ready);
if (resetn)
assert(!trap);
end
picorv32 #(
// change this settings as you like
.ENABLE_REGS_DUALPORT(1),
.TWO_STAGE_SHIFT(1),
.BARREL_SHIFTER(0),
.TWO_CYCLE_COMPARE(0),
.TWO_CYCLE_ALU(0),
.COMPRESSED_ISA(0),
.ENABLE_MUL(0),
.ENABLE_DIV(0)
) cpu (
.clk (clk ),
.resetn (resetn ),
.trap (trap ),
.mem_valid (mem_valid ),
.mem_instr (mem_instr ),
.mem_ready (mem_ready ),
.mem_addr (mem_addr ),
.mem_wdata (mem_wdata ),
.mem_wstrb (mem_wstrb ),
.mem_rdata (mem_rdata )
);
endmodule