picorv32/scripts/torture/testbench.v

135 lines
3.4 KiB
Verilog

module testbench (
`ifdef VERILATOR
input clk
`endif
);
`ifndef VERILATOR
reg clk = 1;
always #5 clk = ~clk;
`endif
reg resetn = 0;
wire trap;
wire mem_valid;
wire mem_instr;
reg mem_ready;
wire [31:0] mem_addr;
wire [31:0] mem_wdata;
wire [3:0] mem_wstrb;
reg [31:0] mem_rdata;
wire mem_la_read;
wire mem_la_write;
wire [31:0] mem_la_addr;
wire [31:0] mem_la_wdata;
wire [3:0] mem_la_wstrb;
reg [31:0] x32 = 314159265;
reg [31:0] next_x32;
always @(posedge clk) begin
if (resetn) begin
next_x32 = x32;
next_x32 = next_x32 ^ (next_x32 << 13);
next_x32 = next_x32 ^ (next_x32 >> 17);
next_x32 = next_x32 ^ (next_x32 << 5);
x32 <= next_x32;
end
end
picorv32 #(
`include "config.vh"
) uut (
.clk (clk ),
.resetn (resetn ),
.trap (trap ),
.mem_valid (mem_valid ),
.mem_instr (mem_instr ),
.mem_ready (mem_ready ),
.mem_addr (mem_addr ),
.mem_wdata (mem_wdata ),
.mem_wstrb (mem_wstrb ),
.mem_rdata (mem_rdata ),
.mem_la_read (mem_la_read ),
.mem_la_write(mem_la_write),
.mem_la_addr (mem_la_addr ),
.mem_la_wdata(mem_la_wdata),
.mem_la_wstrb(mem_la_wstrb)
);
localparam integer filename_len = 18;
reg [8*filename_len-1:0] hex_filename;
reg [8*filename_len-1:0] ref_filename;
reg [31:0] memory [0:4095];
reg [31:0] memory_ref [0:4095];
integer i, errcount;
integer cycle = 0;
initial begin
if ($value$plusargs("hex=%s", hex_filename)) $readmemh(hex_filename, memory);
if ($value$plusargs("ref=%s", ref_filename)) $readmemh(ref_filename, memory_ref);
`ifndef VERILATOR
if ($test$plusargs("vcd")) begin
$dumpfile("test.vcd");
$dumpvars(0, testbench);
end
`endif
end
always @(posedge clk) begin
mem_ready <= 0;
mem_rdata <= 'bx;
if (!trap || !resetn) begin
if (x32[0] && resetn) begin
if (mem_la_read) begin
mem_ready <= 1;
mem_rdata <= memory[mem_la_addr >> 2];
end else
if (mem_la_write) begin
mem_ready <= 1;
if (mem_la_wstrb[0]) memory[mem_la_addr >> 2][ 7: 0] <= mem_la_wdata[ 7: 0];
if (mem_la_wstrb[1]) memory[mem_la_addr >> 2][15: 8] <= mem_la_wdata[15: 8];
if (mem_la_wstrb[2]) memory[mem_la_addr >> 2][23:16] <= mem_la_wdata[23:16];
if (mem_la_wstrb[3]) memory[mem_la_addr >> 2][31:24] <= mem_la_wdata[31:24];
end else
if (mem_valid && !mem_ready) begin
mem_ready <= 1;
if (mem_wstrb) begin
if (mem_wstrb[0]) memory[mem_addr >> 2][ 7: 0] <= mem_wdata[ 7: 0];
if (mem_wstrb[1]) memory[mem_addr >> 2][15: 8] <= mem_wdata[15: 8];
if (mem_wstrb[2]) memory[mem_addr >> 2][23:16] <= mem_wdata[23:16];
if (mem_wstrb[3]) memory[mem_addr >> 2][31:24] <= mem_wdata[31:24];
end else begin
mem_rdata <= memory[mem_addr >> 2];
end
end
end
end else begin
errcount = 0;
for (i=0; i < 4096; i=i+1) begin
if (memory[i] !== memory_ref[i]) begin
$display("Signature check failed at %04x: mem=%08x ref=%08x", i << 2, memory[i], memory_ref[i]);
errcount = errcount + 1;
end
end
if (errcount)
$display("FAILED: Got %1d errors for %1s => %1s!", errcount, hex_filename, ref_filename);
else
$display("PASSED %1s => %1s.", hex_filename, ref_filename);
$finish;
end
if (cycle > 100000) begin
$display("FAILED: Timeout!");
$finish;
end
resetn <= cycle > 10;
cycle <= cycle + 1;
end
endmodule