diff --git a/plugins/jsvm/internal/types/generated/types.d.ts b/plugins/jsvm/internal/types/generated/types.d.ts index 7e107703..09ab2c59 100644 --- a/plugins/jsvm/internal/types/generated/types.d.ts +++ b/plugins/jsvm/internal/types/generated/types.d.ts @@ -1,4 +1,4 @@ -// 1746286514 +// 1746287323 // GENERATED CODE - DO NOT MODIFY BY HAND // ------------------------------------------------------------------- @@ -1770,8 +1770,8 @@ namespace os { * than ReadFrom. This is used to permit ReadFrom to call io.Copy * without leading to a recursive call to ReadFrom. */ - type _sCicdLU = noReadFrom&File - interface fileWithoutReadFrom extends _sCicdLU { + type _sAFBWKK = noReadFrom&File + interface fileWithoutReadFrom extends _sAFBWKK { } interface File { /** @@ -1815,8 +1815,8 @@ namespace os { * than WriteTo. This is used to permit WriteTo to call io.Copy * without leading to a recursive call to WriteTo. */ - type _sqqPraL = noWriteTo&File - interface fileWithoutWriteTo extends _sqqPraL { + type _srdYrzU = noWriteTo&File + interface fileWithoutWriteTo extends _srdYrzU { } interface File { /** @@ -2460,8 +2460,8 @@ namespace os { * * The methods of File are safe for concurrent use. */ - type _sHZuqUu = file - interface File extends _sHZuqUu { + type _sXoQope = file + interface File extends _sXoQope { } /** * A FileInfo describes a file and is returned by [Stat] and [Lstat]. @@ -3092,8 +3092,8 @@ namespace filesystem { */ open(): io.ReadSeekCloser } - type _sTPTWQi = bytes.Reader - interface bytesReadSeekCloser extends _sTPTWQi { + type _sHHUZuj = bytes.Reader + interface bytesReadSeekCloser extends _sHHUZuj { } interface bytesReadSeekCloser { /** @@ -3382,6 +3382,24 @@ namespace template { } } +/** + * Package validation provides configurable and extensible rules for validating data of various types. + */ +namespace ozzo_validation { + /** + * Error interface represents an validation error + */ + interface Error { + [key:string]: any; + error(): string + code(): string + message(): string + setMessage(_arg0: string): Error + params(): _TygojaDict + setParams(_arg0: _TygojaDict): Error + } +} + /** * Package dbx provides a set of DB-agnostic and easy-to-use query building methods for relational databases. */ @@ -3718,14 +3736,14 @@ namespace dbx { /** * MssqlBuilder is the builder for SQL Server databases. */ - type _susOqwH = BaseBuilder - interface MssqlBuilder extends _susOqwH { + type _sMmPQUb = BaseBuilder + interface MssqlBuilder extends _sMmPQUb { } /** * MssqlQueryBuilder is the query builder for SQL Server databases. */ - type _sbaMTRc = BaseQueryBuilder - interface MssqlQueryBuilder extends _sbaMTRc { + type _siQZNjC = BaseQueryBuilder + interface MssqlQueryBuilder extends _siQZNjC { } interface newMssqlBuilder { /** @@ -3796,8 +3814,8 @@ namespace dbx { /** * MysqlBuilder is the builder for MySQL databases. */ - type _sHfkiSL = BaseBuilder - interface MysqlBuilder extends _sHfkiSL { + type _sGAxZZp = BaseBuilder + interface MysqlBuilder extends _sGAxZZp { } interface newMysqlBuilder { /** @@ -3872,14 +3890,14 @@ namespace dbx { /** * OciBuilder is the builder for Oracle databases. */ - type _sbMFSqI = BaseBuilder - interface OciBuilder extends _sbMFSqI { + type _sxxBUdD = BaseBuilder + interface OciBuilder extends _sxxBUdD { } /** * OciQueryBuilder is the query builder for Oracle databases. */ - type _swYEBxB = BaseQueryBuilder - interface OciQueryBuilder extends _swYEBxB { + type _sqdadVg = BaseQueryBuilder + interface OciQueryBuilder extends _sqdadVg { } interface newOciBuilder { /** @@ -3942,8 +3960,8 @@ namespace dbx { /** * PgsqlBuilder is the builder for PostgreSQL databases. */ - type _sewbqon = BaseBuilder - interface PgsqlBuilder extends _sewbqon { + type _sCvIvyB = BaseBuilder + interface PgsqlBuilder extends _sCvIvyB { } interface newPgsqlBuilder { /** @@ -4010,8 +4028,8 @@ namespace dbx { /** * SqliteBuilder is the builder for SQLite databases. */ - type _sTPfRmz = BaseBuilder - interface SqliteBuilder extends _sTPfRmz { + type _srMpPfO = BaseBuilder + interface SqliteBuilder extends _srMpPfO { } interface newSqliteBuilder { /** @@ -4110,8 +4128,8 @@ namespace dbx { /** * StandardBuilder is the builder that is used by DB for an unknown driver. */ - type _sufkfoC = BaseBuilder - interface StandardBuilder extends _sufkfoC { + type _sbKmlCa = BaseBuilder + interface StandardBuilder extends _sbKmlCa { } interface newStandardBuilder { /** @@ -4177,8 +4195,8 @@ namespace dbx { * DB enhances sql.DB by providing a set of DB-agnostic query building methods. * DB allows easier query building and population of data into Go variables. */ - type _sjCWnnO = Builder - interface DB extends _sjCWnnO { + type _stShIKb = Builder + interface DB extends _stShIKb { /** * FieldMapper maps struct fields to DB columns. Defaults to DefaultFieldMapFunc. */ @@ -4982,8 +5000,8 @@ namespace dbx { * Rows enhances sql.Rows by providing additional data query methods. * Rows can be obtained by calling Query.Rows(). It is mainly used to populate data row by row. */ - type _sxakgTM = sql.Rows - interface Rows extends _sxakgTM { + type _spQWbCC = sql.Rows + interface Rows extends _spQWbCC { } interface Rows { /** @@ -5355,8 +5373,8 @@ namespace dbx { }): string } interface structInfo { } - type _sHjCUIR = structInfo - interface structValue extends _sHjCUIR { + type _slHQemi = structInfo + interface structValue extends _slHQemi { } interface fieldInfo { } @@ -5395,8 +5413,8 @@ namespace dbx { /** * Tx enhances sql.Tx with additional querying methods. */ - type _sOEqwMy = Builder - interface Tx extends _sOEqwMy { + type _sUjoaxs = Builder + interface Tx extends _sUjoaxs { } interface Tx { /** @@ -5412,24 +5430,6 @@ namespace dbx { } } -/** - * Package validation provides configurable and extensible rules for validating data of various types. - */ -namespace ozzo_validation { - /** - * Error interface represents an validation error - */ - interface Error { - [key:string]: any; - error(): string - code(): string - message(): string - setMessage(_arg0: string): Error - params(): _TygojaDict - setParams(_arg0: _TygojaDict): Error - } -} - /** * Package exec runs external commands. It wraps os.StartProcess to make it * easier to remap stdin and stdout, connect I/O with pipes, and do other @@ -7211,8 +7211,8 @@ namespace core { /** * AuthOrigin defines a Record proxy for working with the authOrigins collection. */ - type _smfEgYP = Record - interface AuthOrigin extends _smfEgYP { + type _sBfiwjs = Record + interface AuthOrigin extends _sBfiwjs { } interface newAuthOrigin { /** @@ -7957,8 +7957,8 @@ namespace core { /** * @todo experiment eventually replacing the rules *string with a struct? */ - type _sFHsjXC = BaseModel - interface baseCollection extends _sFHsjXC { + type _sKUfVHs = BaseModel + interface baseCollection extends _sKUfVHs { listRule?: string viewRule?: string createRule?: string @@ -7985,8 +7985,8 @@ namespace core { /** * Collection defines the table, fields and various options related to a set of records. */ - type _sTvYshl = baseCollection&collectionAuthOptions&collectionViewOptions - interface Collection extends _sTvYshl { + type _skKCFCi = baseCollection&collectionAuthOptions&collectionViewOptions + interface Collection extends _skKCFCi { } interface newCollection { /** @@ -8996,8 +8996,8 @@ namespace core { /** * RequestEvent defines the PocketBase router handler event. */ - type _snhnRbG = router.Event - interface RequestEvent extends _snhnRbG { + type _sorOCbI = router.Event + interface RequestEvent extends _sorOCbI { app: App auth?: Record } @@ -9057,8 +9057,8 @@ namespace core { */ clone(): (RequestInfo) } - type _sxmLhti = hook.Event&RequestEvent - interface BatchRequestEvent extends _sxmLhti { + type _sEzuEUk = hook.Event&RequestEvent + interface BatchRequestEvent extends _sEzuEUk { batch: Array<(InternalRequest | undefined)> } interface InternalRequest { @@ -9095,24 +9095,24 @@ namespace core { interface baseCollectionEventData { tags(): Array } - type _seafSFB = hook.Event - interface BootstrapEvent extends _seafSFB { + type _syOdOeg = hook.Event + interface BootstrapEvent extends _syOdOeg { app: App } - type _sPnkYTq = hook.Event - interface TerminateEvent extends _sPnkYTq { + type _sOOcEoY = hook.Event + interface TerminateEvent extends _sOOcEoY { app: App isRestart: boolean } - type _sAOQxbt = hook.Event - interface BackupEvent extends _sAOQxbt { + type _sAJljzD = hook.Event + interface BackupEvent extends _sAJljzD { app: App context: context.Context name: string // the name of the backup to create/restore. exclude: Array // list of dir entries to exclude from the backup create/restore. } - type _sENnkMY = hook.Event - interface ServeEvent extends _sENnkMY { + type _sHullcj = hook.Event + interface ServeEvent extends _sHullcj { app: App router?: router.Router server?: http.Server @@ -9135,31 +9135,31 @@ namespace core { */ installerFunc: (app: App, systemSuperuser: Record, baseURL: string) => void } - type _sSimNJM = hook.Event&RequestEvent - interface SettingsListRequestEvent extends _sSimNJM { + type _sEXamvs = hook.Event&RequestEvent + interface SettingsListRequestEvent extends _sEXamvs { settings?: Settings } - type _sySEAoy = hook.Event&RequestEvent - interface SettingsUpdateRequestEvent extends _sySEAoy { + type _sEcYVOX = hook.Event&RequestEvent + interface SettingsUpdateRequestEvent extends _sEcYVOX { oldSettings?: Settings newSettings?: Settings } - type _sEVETjq = hook.Event - interface SettingsReloadEvent extends _sEVETjq { + type _suaOrsu = hook.Event + interface SettingsReloadEvent extends _suaOrsu { app: App } - type _spRItks = hook.Event - interface MailerEvent extends _spRItks { + type _sGoKuBs = hook.Event + interface MailerEvent extends _sGoKuBs { app: App mailer: mailer.Mailer message?: mailer.Message } - type _sFYhZcc = MailerEvent&baseRecordEventData - interface MailerRecordEvent extends _sFYhZcc { + type _swxEVMP = MailerEvent&baseRecordEventData + interface MailerRecordEvent extends _swxEVMP { meta: _TygojaDict } - type _sruOEOu = hook.Event&baseModelEventData - interface ModelEvent extends _sruOEOu { + type _samlwYO = hook.Event&baseModelEventData + interface ModelEvent extends _samlwYO { app: App context: context.Context /** @@ -9171,12 +9171,12 @@ namespace core { */ type: string } - type _sPslLeb = ModelEvent - interface ModelErrorEvent extends _sPslLeb { + type _slwoJcA = ModelEvent + interface ModelErrorEvent extends _slwoJcA { error: Error } - type _ssLUcRh = hook.Event&baseRecordEventData - interface RecordEvent extends _ssLUcRh { + type _sPAePNo = hook.Event&baseRecordEventData + interface RecordEvent extends _sPAePNo { app: App context: context.Context /** @@ -9188,12 +9188,12 @@ namespace core { */ type: string } - type _sHvDlDk = RecordEvent - interface RecordErrorEvent extends _sHvDlDk { + type _sjzGFJN = RecordEvent + interface RecordErrorEvent extends _sjzGFJN { error: Error } - type _shQRZnp = hook.Event&baseCollectionEventData - interface CollectionEvent extends _shQRZnp { + type _sNiDWoY = hook.Event&baseCollectionEventData + interface CollectionEvent extends _sNiDWoY { app: App context: context.Context /** @@ -9205,95 +9205,95 @@ namespace core { */ type: string } - type _szYlmYw = CollectionEvent - interface CollectionErrorEvent extends _szYlmYw { + type _sibPOHw = CollectionEvent + interface CollectionErrorEvent extends _sibPOHw { error: Error } - type _sRlgnmq = hook.Event&RequestEvent&baseRecordEventData - interface FileTokenRequestEvent extends _sRlgnmq { + type _sUJydiy = hook.Event&RequestEvent&baseRecordEventData + interface FileTokenRequestEvent extends _sUJydiy { token: string } - type _sJHaSyy = hook.Event&RequestEvent&baseCollectionEventData - interface FileDownloadRequestEvent extends _sJHaSyy { + type _sjKfaKV = hook.Event&RequestEvent&baseCollectionEventData + interface FileDownloadRequestEvent extends _sjKfaKV { record?: Record fileField?: FileField servedPath: string servedName: string } - type _snCghxT = hook.Event&RequestEvent - interface CollectionsListRequestEvent extends _snCghxT { + type _sNNdCub = hook.Event&RequestEvent + interface CollectionsListRequestEvent extends _sNNdCub { collections: Array<(Collection | undefined)> result?: search.Result } - type _sxbSTju = hook.Event&RequestEvent - interface CollectionsImportRequestEvent extends _sxbSTju { + type _spLWsOV = hook.Event&RequestEvent + interface CollectionsImportRequestEvent extends _spLWsOV { collectionsData: Array<_TygojaDict> deleteMissing: boolean } - type _srZSWyB = hook.Event&RequestEvent&baseCollectionEventData - interface CollectionRequestEvent extends _srZSWyB { + type _sxWoANL = hook.Event&RequestEvent&baseCollectionEventData + interface CollectionRequestEvent extends _sxWoANL { } - type _swbcbHI = hook.Event&RequestEvent - interface RealtimeConnectRequestEvent extends _swbcbHI { + type _sGathoX = hook.Event&RequestEvent + interface RealtimeConnectRequestEvent extends _sGathoX { client: subscriptions.Client /** * note: modifying it after the connect has no effect */ idleTimeout: time.Duration } - type _sEIqRQP = hook.Event&RequestEvent - interface RealtimeMessageEvent extends _sEIqRQP { + type _sbnSCSA = hook.Event&RequestEvent + interface RealtimeMessageEvent extends _sbnSCSA { client: subscriptions.Client message?: subscriptions.Message } - type _sWvqqZZ = hook.Event&RequestEvent - interface RealtimeSubscribeRequestEvent extends _sWvqqZZ { + type _sJjOuAj = hook.Event&RequestEvent + interface RealtimeSubscribeRequestEvent extends _sJjOuAj { client: subscriptions.Client subscriptions: Array } - type _sRfcxcV = hook.Event&RequestEvent&baseCollectionEventData - interface RecordsListRequestEvent extends _sRfcxcV { + type _svfjDAh = hook.Event&RequestEvent&baseCollectionEventData + interface RecordsListRequestEvent extends _svfjDAh { /** * @todo consider removing and maybe add as generic to the search.Result? */ records: Array<(Record | undefined)> result?: search.Result } - type _sfPZfRz = hook.Event&RequestEvent&baseCollectionEventData - interface RecordRequestEvent extends _sfPZfRz { + type _sYYExaG = hook.Event&RequestEvent&baseCollectionEventData + interface RecordRequestEvent extends _sYYExaG { record?: Record } - type _soXxvXL = hook.Event&baseRecordEventData - interface RecordEnrichEvent extends _soXxvXL { + type _sUfbURh = hook.Event&baseRecordEventData + interface RecordEnrichEvent extends _sUfbURh { app: App requestInfo?: RequestInfo } - type _sCKjYLD = hook.Event&RequestEvent&baseCollectionEventData - interface RecordCreateOTPRequestEvent extends _sCKjYLD { + type _sOastus = hook.Event&RequestEvent&baseCollectionEventData + interface RecordCreateOTPRequestEvent extends _sOastus { record?: Record password: string } - type _sbIgBtl = hook.Event&RequestEvent&baseCollectionEventData - interface RecordAuthWithOTPRequestEvent extends _sbIgBtl { + type _sPatEsV = hook.Event&RequestEvent&baseCollectionEventData + interface RecordAuthWithOTPRequestEvent extends _sPatEsV { record?: Record otp?: OTP } - type _sHEmkyI = hook.Event&RequestEvent&baseCollectionEventData - interface RecordAuthRequestEvent extends _sHEmkyI { + type _sawPkLC = hook.Event&RequestEvent&baseCollectionEventData + interface RecordAuthRequestEvent extends _sawPkLC { record?: Record token: string meta: any authMethod: string } - type _sOWTQBM = hook.Event&RequestEvent&baseCollectionEventData - interface RecordAuthWithPasswordRequestEvent extends _sOWTQBM { + type _squiNzX = hook.Event&RequestEvent&baseCollectionEventData + interface RecordAuthWithPasswordRequestEvent extends _squiNzX { record?: Record identity: string identityField: string password: string } - type _sDHMbgI = hook.Event&RequestEvent&baseCollectionEventData - interface RecordAuthWithOAuth2RequestEvent extends _sDHMbgI { + type _ssEACvV = hook.Event&RequestEvent&baseCollectionEventData + interface RecordAuthWithOAuth2RequestEvent extends _ssEACvV { providerName: string providerClient: auth.Provider record?: Record @@ -9301,41 +9301,41 @@ namespace core { createData: _TygojaDict isNewRecord: boolean } - type _sJuJaPk = hook.Event&RequestEvent&baseCollectionEventData - interface RecordAuthRefreshRequestEvent extends _sJuJaPk { + type _sZZDVfS = hook.Event&RequestEvent&baseCollectionEventData + interface RecordAuthRefreshRequestEvent extends _sZZDVfS { record?: Record } - type _sqtTUuU = hook.Event&RequestEvent&baseCollectionEventData - interface RecordRequestPasswordResetRequestEvent extends _sqtTUuU { + type _syMDhfS = hook.Event&RequestEvent&baseCollectionEventData + interface RecordRequestPasswordResetRequestEvent extends _syMDhfS { record?: Record } - type _szXSiLj = hook.Event&RequestEvent&baseCollectionEventData - interface RecordConfirmPasswordResetRequestEvent extends _szXSiLj { + type _srCHPsR = hook.Event&RequestEvent&baseCollectionEventData + interface RecordConfirmPasswordResetRequestEvent extends _srCHPsR { record?: Record } - type _sdVYNyJ = hook.Event&RequestEvent&baseCollectionEventData - interface RecordRequestVerificationRequestEvent extends _sdVYNyJ { + type _sQcByxo = hook.Event&RequestEvent&baseCollectionEventData + interface RecordRequestVerificationRequestEvent extends _sQcByxo { record?: Record } - type _sAbEmOX = hook.Event&RequestEvent&baseCollectionEventData - interface RecordConfirmVerificationRequestEvent extends _sAbEmOX { + type _sogDyPJ = hook.Event&RequestEvent&baseCollectionEventData + interface RecordConfirmVerificationRequestEvent extends _sogDyPJ { record?: Record } - type _sxsFQvv = hook.Event&RequestEvent&baseCollectionEventData - interface RecordRequestEmailChangeRequestEvent extends _sxsFQvv { + type _scatfBI = hook.Event&RequestEvent&baseCollectionEventData + interface RecordRequestEmailChangeRequestEvent extends _scatfBI { record?: Record newEmail: string } - type _sWRAQmh = hook.Event&RequestEvent&baseCollectionEventData - interface RecordConfirmEmailChangeRequestEvent extends _sWRAQmh { + type _sPAtytx = hook.Event&RequestEvent&baseCollectionEventData + interface RecordConfirmEmailChangeRequestEvent extends _sPAtytx { record?: Record newEmail: string } /** * ExternalAuth defines a Record proxy for working with the externalAuths collection. */ - type _sqmygiF = Record - interface ExternalAuth extends _sqmygiF { + type _sDeeYCv = Record + interface ExternalAuth extends _sDeeYCv { } interface newExternalAuth { /** @@ -11797,8 +11797,8 @@ namespace core { interface onlyFieldType { type: string } - type _sbMoSqV = Field - interface fieldWithType extends _sbMoSqV { + type _siqFDPg = Field + interface fieldWithType extends _siqFDPg { type: string } interface fieldWithType { @@ -11830,8 +11830,8 @@ namespace core { */ scan(value: any): void } - type _sLovPMP = BaseModel - interface Log extends _sLovPMP { + type _sFizZWL = BaseModel + interface Log extends _sFizZWL { created: types.DateTime data: types.JSONMap message: string @@ -11877,8 +11877,8 @@ namespace core { /** * MFA defines a Record proxy for working with the mfas collection. */ - type _sGwUJpj = Record - interface MFA extends _sGwUJpj { + type _scvXspz = Record + interface MFA extends _scvXspz { } interface newMFA { /** @@ -12100,8 +12100,8 @@ namespace core { /** * OTP defines a Record proxy for working with the otps collection. */ - type _sKHIfpI = Record - interface OTP extends _sKHIfpI { + type _sXHobfx = Record + interface OTP extends _sXHobfx { } interface newOTP { /** @@ -12337,8 +12337,8 @@ namespace core { } interface runner { } - type _sXaUGZL = BaseModel - interface Record extends _sXaUGZL { + type _sZjMZHO = BaseModel + interface Record extends _sZjMZHO { } interface newRecord { /** @@ -12813,8 +12813,8 @@ namespace core { * BaseRecordProxy implements the [RecordProxy] interface and it is intended * to be used as embed to custom user provided Record proxy structs. */ - type _sACLDxv = Record - interface BaseRecordProxy extends _sACLDxv { + type _spDTukU = Record + interface BaseRecordProxy extends _spDTukU { } interface BaseRecordProxy { /** @@ -13063,8 +13063,8 @@ namespace core { /** * Settings defines the PocketBase app settings. */ - type _sglbQTW = settings - interface Settings extends _sglbQTW { + type _sLRllnQ = settings + interface Settings extends _sLRllnQ { } interface Settings { /** @@ -13365,8 +13365,8 @@ namespace core { */ durationTime(): time.Duration } - type _sosUsNi = BaseModel - interface Param extends _sosUsNi { + type _siTEqfm = BaseModel + interface Param extends _siTEqfm { created: types.DateTime updated: types.DateTime value: types.JSONRaw @@ -13880,8 +13880,8 @@ namespace apis { */ (limitBytes: number): (hook.Handler) } - type _sqkhklQ = io.ReadCloser - interface limitedReader extends _sqkhklQ { + type _sDkxKAi = io.ReadCloser + interface limitedReader extends _sDkxKAi { } interface limitedReader { read(b: string|Array): number @@ -14032,8 +14032,8 @@ namespace apis { */ (config: GzipConfig): (hook.Handler) } - type _szeWoJY = http.ResponseWriter&io.Writer - interface gzipResponseWriter extends _szeWoJY { + type _sRuzIlI = http.ResponseWriter&io.Writer + interface gzipResponseWriter extends _sRuzIlI { } interface gzipResponseWriter { writeHeader(code: number): void @@ -14053,11 +14053,11 @@ namespace apis { interface gzipResponseWriter { unwrap(): http.ResponseWriter } - type _sDOToOE = sync.RWMutex - interface rateLimiter extends _sDOToOE { + type _sFueUyB = sync.RWMutex + interface rateLimiter extends _sFueUyB { } - type _saKIahe = sync.Mutex - interface fixedWindow extends _saKIahe { + type _sMhItsT = sync.Mutex + interface fixedWindow extends _sMhItsT { } interface realtimeSubscribeForm { clientId: string @@ -14298,8 +14298,8 @@ namespace pocketbase { * It implements [CoreApp] via embedding and all of the app interface methods * could be accessed directly through the instance (eg. PocketBase.DataDir()). */ - type _sIfyHZt = CoreApp - interface PocketBase extends _sIfyHZt { + type _sDtPfeR = CoreApp + interface PocketBase extends _sDtPfeR { /** * RootCmd is the main console command */ @@ -15427,169 +15427,6 @@ namespace time { } } -/** - * Package context defines the Context type, which carries deadlines, - * cancellation signals, and other request-scoped values across API boundaries - * and between processes. - * - * Incoming requests to a server should create a [Context], and outgoing - * calls to servers should accept a Context. The chain of function - * calls between them must propagate the Context, optionally replacing - * it with a derived Context created using [WithCancel], [WithDeadline], - * [WithTimeout], or [WithValue]. When a Context is canceled, all - * Contexts derived from it are also canceled. - * - * The [WithCancel], [WithDeadline], and [WithTimeout] functions take a - * Context (the parent) and return a derived Context (the child) and a - * [CancelFunc]. Calling the CancelFunc cancels the child and its - * children, removes the parent's reference to the child, and stops - * any associated timers. Failing to call the CancelFunc leaks the - * child and its children until the parent is canceled or the timer - * fires. The go vet tool checks that CancelFuncs are used on all - * control-flow paths. - * - * The [WithCancelCause] function returns a [CancelCauseFunc], which - * takes an error and records it as the cancellation cause. Calling - * [Cause] on the canceled context or any of its children retrieves - * the cause. If no cause is specified, Cause(ctx) returns the same - * value as ctx.Err(). - * - * Programs that use Contexts should follow these rules to keep interfaces - * consistent across packages and enable static analysis tools to check context - * propagation: - * - * Do not store Contexts inside a struct type; instead, pass a Context - * explicitly to each function that needs it. The Context should be the first - * parameter, typically named ctx: - * - * ``` - * func DoSomething(ctx context.Context, arg Arg) error { - * // ... use ctx ... - * } - * ``` - * - * Do not pass a nil [Context], even if a function permits it. Pass [context.TODO] - * if you are unsure about which Context to use. - * - * Use context Values only for request-scoped data that transits processes and - * APIs, not for passing optional parameters to functions. - * - * The same Context may be passed to functions running in different goroutines; - * Contexts are safe for simultaneous use by multiple goroutines. - * - * See https://blog.golang.org/context for example code for a server that uses - * Contexts. - */ -namespace context { - /** - * A Context carries a deadline, a cancellation signal, and other values across - * API boundaries. - * - * Context's methods may be called by multiple goroutines simultaneously. - */ - interface Context { - [key:string]: any; - /** - * Deadline returns the time when work done on behalf of this context - * should be canceled. Deadline returns ok==false when no deadline is - * set. Successive calls to Deadline return the same results. - */ - deadline(): [time.Time, boolean] - /** - * Done returns a channel that's closed when work done on behalf of this - * context should be canceled. Done may return nil if this context can - * never be canceled. Successive calls to Done return the same value. - * The close of the Done channel may happen asynchronously, - * after the cancel function returns. - * - * WithCancel arranges for Done to be closed when cancel is called; - * WithDeadline arranges for Done to be closed when the deadline - * expires; WithTimeout arranges for Done to be closed when the timeout - * elapses. - * - * Done is provided for use in select statements: - * - * // Stream generates values with DoSomething and sends them to out - * // until DoSomething returns an error or ctx.Done is closed. - * func Stream(ctx context.Context, out chan<- Value) error { - * for { - * v, err := DoSomething(ctx) - * if err != nil { - * return err - * } - * select { - * case <-ctx.Done(): - * return ctx.Err() - * case out <- v: - * } - * } - * } - * - * See https://blog.golang.org/pipelines for more examples of how to use - * a Done channel for cancellation. - */ - done(): undefined - /** - * If Done is not yet closed, Err returns nil. - * If Done is closed, Err returns a non-nil error explaining why: - * Canceled if the context was canceled - * or DeadlineExceeded if the context's deadline passed. - * After Err returns a non-nil error, successive calls to Err return the same error. - */ - err(): void - /** - * Value returns the value associated with this context for key, or nil - * if no value is associated with key. Successive calls to Value with - * the same key returns the same result. - * - * Use context values only for request-scoped data that transits - * processes and API boundaries, not for passing optional parameters to - * functions. - * - * A key identifies a specific value in a Context. Functions that wish - * to store values in Context typically allocate a key in a global - * variable then use that key as the argument to context.WithValue and - * Context.Value. A key can be any type that supports equality; - * packages should define keys as an unexported type to avoid - * collisions. - * - * Packages that define a Context key should provide type-safe accessors - * for the values stored using that key: - * - * ``` - * // Package user defines a User type that's stored in Contexts. - * package user - * - * import "context" - * - * // User is the type of value stored in the Contexts. - * type User struct {...} - * - * // key is an unexported type for keys defined in this package. - * // This prevents collisions with keys defined in other packages. - * type key int - * - * // userKey is the key for user.User values in Contexts. It is - * // unexported; clients use user.NewContext and user.FromContext - * // instead of using this key directly. - * var userKey key - * - * // NewContext returns a new Context that carries value u. - * func NewContext(ctx context.Context, u *User) context.Context { - * return context.WithValue(ctx, userKey, u) - * } - * - * // FromContext returns the User value stored in ctx, if any. - * func FromContext(ctx context.Context) (*User, bool) { - * u, ok := ctx.Value(userKey).(*User) - * return u, ok - * } - * ``` - */ - value(key: any): any - } -} - /** * Package fs defines basic interfaces to a file system. * A file system can be provided by the host operating system @@ -15800,8 +15637,171 @@ namespace bufio { * ReadWriter stores pointers to a [Reader] and a [Writer]. * It implements [io.ReadWriter]. */ - type _sEzcohV = Reader&Writer - interface ReadWriter extends _sEzcohV { + type _sMCrrvZ = Reader&Writer + interface ReadWriter extends _sMCrrvZ { + } +} + +/** + * Package context defines the Context type, which carries deadlines, + * cancellation signals, and other request-scoped values across API boundaries + * and between processes. + * + * Incoming requests to a server should create a [Context], and outgoing + * calls to servers should accept a Context. The chain of function + * calls between them must propagate the Context, optionally replacing + * it with a derived Context created using [WithCancel], [WithDeadline], + * [WithTimeout], or [WithValue]. When a Context is canceled, all + * Contexts derived from it are also canceled. + * + * The [WithCancel], [WithDeadline], and [WithTimeout] functions take a + * Context (the parent) and return a derived Context (the child) and a + * [CancelFunc]. Calling the CancelFunc cancels the child and its + * children, removes the parent's reference to the child, and stops + * any associated timers. Failing to call the CancelFunc leaks the + * child and its children until the parent is canceled or the timer + * fires. The go vet tool checks that CancelFuncs are used on all + * control-flow paths. + * + * The [WithCancelCause] function returns a [CancelCauseFunc], which + * takes an error and records it as the cancellation cause. Calling + * [Cause] on the canceled context or any of its children retrieves + * the cause. If no cause is specified, Cause(ctx) returns the same + * value as ctx.Err(). + * + * Programs that use Contexts should follow these rules to keep interfaces + * consistent across packages and enable static analysis tools to check context + * propagation: + * + * Do not store Contexts inside a struct type; instead, pass a Context + * explicitly to each function that needs it. The Context should be the first + * parameter, typically named ctx: + * + * ``` + * func DoSomething(ctx context.Context, arg Arg) error { + * // ... use ctx ... + * } + * ``` + * + * Do not pass a nil [Context], even if a function permits it. Pass [context.TODO] + * if you are unsure about which Context to use. + * + * Use context Values only for request-scoped data that transits processes and + * APIs, not for passing optional parameters to functions. + * + * The same Context may be passed to functions running in different goroutines; + * Contexts are safe for simultaneous use by multiple goroutines. + * + * See https://blog.golang.org/context for example code for a server that uses + * Contexts. + */ +namespace context { + /** + * A Context carries a deadline, a cancellation signal, and other values across + * API boundaries. + * + * Context's methods may be called by multiple goroutines simultaneously. + */ + interface Context { + [key:string]: any; + /** + * Deadline returns the time when work done on behalf of this context + * should be canceled. Deadline returns ok==false when no deadline is + * set. Successive calls to Deadline return the same results. + */ + deadline(): [time.Time, boolean] + /** + * Done returns a channel that's closed when work done on behalf of this + * context should be canceled. Done may return nil if this context can + * never be canceled. Successive calls to Done return the same value. + * The close of the Done channel may happen asynchronously, + * after the cancel function returns. + * + * WithCancel arranges for Done to be closed when cancel is called; + * WithDeadline arranges for Done to be closed when the deadline + * expires; WithTimeout arranges for Done to be closed when the timeout + * elapses. + * + * Done is provided for use in select statements: + * + * // Stream generates values with DoSomething and sends them to out + * // until DoSomething returns an error or ctx.Done is closed. + * func Stream(ctx context.Context, out chan<- Value) error { + * for { + * v, err := DoSomething(ctx) + * if err != nil { + * return err + * } + * select { + * case <-ctx.Done(): + * return ctx.Err() + * case out <- v: + * } + * } + * } + * + * See https://blog.golang.org/pipelines for more examples of how to use + * a Done channel for cancellation. + */ + done(): undefined + /** + * If Done is not yet closed, Err returns nil. + * If Done is closed, Err returns a non-nil error explaining why: + * Canceled if the context was canceled + * or DeadlineExceeded if the context's deadline passed. + * After Err returns a non-nil error, successive calls to Err return the same error. + */ + err(): void + /** + * Value returns the value associated with this context for key, or nil + * if no value is associated with key. Successive calls to Value with + * the same key returns the same result. + * + * Use context values only for request-scoped data that transits + * processes and API boundaries, not for passing optional parameters to + * functions. + * + * A key identifies a specific value in a Context. Functions that wish + * to store values in Context typically allocate a key in a global + * variable then use that key as the argument to context.WithValue and + * Context.Value. A key can be any type that supports equality; + * packages should define keys as an unexported type to avoid + * collisions. + * + * Packages that define a Context key should provide type-safe accessors + * for the values stored using that key: + * + * ``` + * // Package user defines a User type that's stored in Contexts. + * package user + * + * import "context" + * + * // User is the type of value stored in the Contexts. + * type User struct {...} + * + * // key is an unexported type for keys defined in this package. + * // This prevents collisions with keys defined in other packages. + * type key int + * + * // userKey is the key for user.User values in Contexts. It is + * // unexported; clients use user.NewContext and user.FromContext + * // instead of using this key directly. + * var userKey key + * + * // NewContext returns a new Context that carries value u. + * func NewContext(ctx context.Context, u *User) context.Context { + * return context.WithValue(ctx, userKey, u) + * } + * + * // FromContext returns the User value stored in ctx, if any. + * func FromContext(ctx context.Context) (*User, bool) { + * u, ok := ctx.Value(userKey).(*User) + * return u, ok + * } + * ``` + */ + value(key: any): any } } @@ -16999,166 +16999,6 @@ namespace http { } } -/** - * Package blob defines a lightweight abstration for interacting with - * various storage services (local filesystem, S3, etc.). - * - * NB! - * For compatibility with earlier PocketBase versions and to prevent - * unnecessary breaking changes, this package is based and implemented - * as a minimal, stripped down version of the previously used gocloud.dev/blob. - * While there is no promise that it won't diverge in the future to accommodate - * better some PocketBase specific use cases, currently it copies and - * tries to follow as close as possible the same implementations, - * conventions and rules for the key escaping/unescaping, blob read/write - * interfaces and struct options as gocloud.dev/blob, therefore the - * credits goes to the original Go Cloud Development Kit Authors. - */ -namespace blob { - /** - * ListObject represents a single blob returned from List. - */ - interface ListObject { - /** - * Key is the key for this blob. - */ - key: string - /** - * ModTime is the time the blob was last modified. - */ - modTime: time.Time - /** - * Size is the size of the blob's content in bytes. - */ - size: number - /** - * MD5 is an MD5 hash of the blob contents or nil if not available. - */ - md5: string|Array - /** - * IsDir indicates that this result represents a "directory" in the - * hierarchical namespace, ending in ListOptions.Delimiter. Key can be - * passed as ListOptions.Prefix to list items in the "directory". - * Fields other than Key and IsDir will not be set if IsDir is true. - */ - isDir: boolean - } - /** - * Attributes contains attributes about a blob. - */ - interface Attributes { - /** - * CacheControl specifies caching attributes that services may use - * when serving the blob. - * https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Cache-Control - */ - cacheControl: string - /** - * ContentDisposition specifies whether the blob content is expected to be - * displayed inline or as an attachment. - * https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Disposition - */ - contentDisposition: string - /** - * ContentEncoding specifies the encoding used for the blob's content, if any. - * https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Encoding - */ - contentEncoding: string - /** - * ContentLanguage specifies the language used in the blob's content, if any. - * https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Language - */ - contentLanguage: string - /** - * ContentType is the MIME type of the blob. It will not be empty. - * https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Type - */ - contentType: string - /** - * Metadata holds key/value pairs associated with the blob. - * Keys are guaranteed to be in lowercase, even if the backend service - * has case-sensitive keys (although note that Metadata written via - * this package will always be lowercased). If there are duplicate - * case-insensitive keys (e.g., "foo" and "FOO"), only one value - * will be kept, and it is undefined which one. - */ - metadata: _TygojaDict - /** - * CreateTime is the time the blob was created, if available. If not available, - * CreateTime will be the zero time. - */ - createTime: time.Time - /** - * ModTime is the time the blob was last modified. - */ - modTime: time.Time - /** - * Size is the size of the blob's content in bytes. - */ - size: number - /** - * MD5 is an MD5 hash of the blob contents or nil if not available. - */ - md5: string|Array - /** - * ETag for the blob; see https://en.wikipedia.org/wiki/HTTP_ETag. - */ - eTag: string - } - /** - * Reader reads bytes from a blob. - * It implements io.ReadSeekCloser, and must be closed after reads are finished. - */ - interface Reader { - } - interface Reader { - /** - * Read implements io.Reader (https://golang.org/pkg/io/#Reader). - */ - read(p: string|Array): number - } - interface Reader { - /** - * Seek implements io.Seeker (https://golang.org/pkg/io/#Seeker). - */ - seek(offset: number, whence: number): number - } - interface Reader { - /** - * Close implements io.Closer (https://golang.org/pkg/io/#Closer). - */ - close(): void - } - interface Reader { - /** - * ContentType returns the MIME type of the blob. - */ - contentType(): string - } - interface Reader { - /** - * ModTime returns the time the blob was last modified. - */ - modTime(): time.Time - } - interface Reader { - /** - * Size returns the size of the blob content in bytes. - */ - size(): number - } - interface Reader { - /** - * WriteTo reads from r and writes to w until there's no more data or - * an error occurs. - * The return value is the number of bytes written to w. - * - * It implements the io.WriterTo interface. - */ - writeTo(w: io.Writer): number - } -} - /** * Package syntax parses regular expressions into parse trees and compiles * parse trees into programs. Most clients of regular expressions will use the @@ -17321,6 +17161,131 @@ namespace syntax { interface Flags extends Number{} } +namespace store { + /** + * Store defines a concurrent safe in memory key-value data store. + */ + interface Store { + } + interface Store { + /** + * Reset clears the store and replaces the store data with a + * shallow copy of the provided newData. + */ + reset(newData: _TygojaDict): void + } + interface Store { + /** + * Length returns the current number of elements in the store. + */ + length(): number + } + interface Store { + /** + * RemoveAll removes all the existing store entries. + */ + removeAll(): void + } + interface Store { + /** + * Remove removes a single entry from the store. + * + * Remove does nothing if key doesn't exist in the store. + */ + remove(key: K): void + } + interface Store { + /** + * Has checks if element with the specified key exist or not. + */ + has(key: K): boolean + } + interface Store { + /** + * Get returns a single element value from the store. + * + * If key is not set, the zero T value is returned. + */ + get(key: K): T + } + interface Store { + /** + * GetOk is similar to Get but returns also a boolean indicating whether the key exists or not. + */ + getOk(key: K): [T, boolean] + } + interface Store { + /** + * GetAll returns a shallow copy of the current store data. + */ + getAll(): _TygojaDict + } + interface Store { + /** + * Values returns a slice with all of the current store values. + */ + values(): Array + } + interface Store { + /** + * Set sets (or overwrite if already exists) a new value for key. + */ + set(key: K, value: T): void + } + interface Store { + /** + * SetFunc sets (or overwrite if already exists) a new value resolved + * from the function callback for the provided key. + * + * The function callback receives as argument the old store element value (if exists). + * If there is no old store element, the argument will be the T zero value. + * + * Example: + * + * ``` + * s := store.New[string, int](nil) + * s.SetFunc("count", func(old int) int { + * return old + 1 + * }) + * ``` + */ + setFunc(key: K, fn: (old: T) => T): void + } + interface Store { + /** + * GetOrSet retrieves a single existing value for the provided key + * or stores a new one if it doesn't exist. + */ + getOrSet(key: K, setFunc: () => T): T + } + interface Store { + /** + * SetIfLessThanLimit sets (or overwrite if already exist) a new value for key. + * + * This method is similar to Set() but **it will skip adding new elements** + * to the store if the store length has reached the specified limit. + * false is returned if maxAllowedElements limit is reached. + */ + setIfLessThanLimit(key: K, value: T, maxAllowedElements: number): boolean + } + interface Store { + /** + * UnmarshalJSON implements [json.Unmarshaler] and imports the + * provided JSON data into the store. + * + * The store entries that match with the ones from the data will be overwritten with the new value. + */ + unmarshalJSON(data: string|Array): void + } + interface Store { + /** + * MarshalJSON implements [json.Marshaler] and export the current + * store data into valid JSON. + */ + marshalJSON(): string|Array + } +} + /** * Package jwt is a Go implementation of JSON Web Tokens: http://self-issued.info/docs/draft-jones-json-web-token.html * @@ -17370,6 +17335,399 @@ namespace jwt { } } +namespace hook { + /** + * Event implements [Resolver] and it is intended to be used as a base + * Hook event that you can embed in your custom typed event structs. + * + * Example: + * + * ``` + * type CustomEvent struct { + * hook.Event + * + * SomeField int + * } + * ``` + */ + interface Event { + } + interface Event { + /** + * Next calls the next hook handler. + */ + next(): void + } + /** + * Handler defines a single Hook handler. + * Multiple handlers can share the same id. + * If Id is not explicitly set it will be autogenerated by Hook.Add and Hook.AddHandler. + */ + interface Handler { + /** + * Func defines the handler function to execute. + * + * Note that users need to call e.Next() in order to proceed with + * the execution of the hook chain. + */ + func: (_arg0: T) => void + /** + * Id is the unique identifier of the handler. + * + * It could be used later to remove the handler from a hook via [Hook.Remove]. + * + * If missing, an autogenerated value will be assigned when adding + * the handler to a hook. + */ + id: string + /** + * Priority allows changing the default exec priority of the handler within a hook. + * + * If 0, the handler will be executed in the same order it was registered. + */ + priority: number + } + /** + * Hook defines a generic concurrent safe structure for managing event hooks. + * + * When using custom event it must embed the base [hook.Event]. + * + * Example: + * + * ``` + * type CustomEvent struct { + * hook.Event + * SomeField int + * } + * + * h := Hook[*CustomEvent]{} + * + * h.BindFunc(func(e *CustomEvent) error { + * println(e.SomeField) + * + * return e.Next() + * }) + * + * h.Trigger(&CustomEvent{ SomeField: 123 }) + * ``` + */ + interface Hook { + } + /** + * TaggedHook defines a proxy hook which register handlers that are triggered only + * if the TaggedHook.tags are empty or includes at least one of the event data tag(s). + */ + type _shhgAbB = mainHook + interface TaggedHook extends _shhgAbB { + } +} + +namespace exec { + /** + * Cmd represents an external command being prepared or run. + * + * A Cmd cannot be reused after calling its [Cmd.Run], [Cmd.Output] or [Cmd.CombinedOutput] + * methods. + */ + interface Cmd { + /** + * Path is the path of the command to run. + * + * This is the only field that must be set to a non-zero + * value. If Path is relative, it is evaluated relative + * to Dir. + */ + path: string + /** + * Args holds command line arguments, including the command as Args[0]. + * If the Args field is empty or nil, Run uses {Path}. + * + * In typical use, both Path and Args are set by calling Command. + */ + args: Array + /** + * Env specifies the environment of the process. + * Each entry is of the form "key=value". + * If Env is nil, the new process uses the current process's + * environment. + * If Env contains duplicate environment keys, only the last + * value in the slice for each duplicate key is used. + * As a special case on Windows, SYSTEMROOT is always added if + * missing and not explicitly set to the empty string. + */ + env: Array + /** + * Dir specifies the working directory of the command. + * If Dir is the empty string, Run runs the command in the + * calling process's current directory. + */ + dir: string + /** + * Stdin specifies the process's standard input. + * + * If Stdin is nil, the process reads from the null device (os.DevNull). + * + * If Stdin is an *os.File, the process's standard input is connected + * directly to that file. + * + * Otherwise, during the execution of the command a separate + * goroutine reads from Stdin and delivers that data to the command + * over a pipe. In this case, Wait does not complete until the goroutine + * stops copying, either because it has reached the end of Stdin + * (EOF or a read error), or because writing to the pipe returned an error, + * or because a nonzero WaitDelay was set and expired. + */ + stdin: io.Reader + /** + * Stdout and Stderr specify the process's standard output and error. + * + * If either is nil, Run connects the corresponding file descriptor + * to the null device (os.DevNull). + * + * If either is an *os.File, the corresponding output from the process + * is connected directly to that file. + * + * Otherwise, during the execution of the command a separate goroutine + * reads from the process over a pipe and delivers that data to the + * corresponding Writer. In this case, Wait does not complete until the + * goroutine reaches EOF or encounters an error or a nonzero WaitDelay + * expires. + * + * If Stdout and Stderr are the same writer, and have a type that can + * be compared with ==, at most one goroutine at a time will call Write. + */ + stdout: io.Writer + stderr: io.Writer + /** + * ExtraFiles specifies additional open files to be inherited by the + * new process. It does not include standard input, standard output, or + * standard error. If non-nil, entry i becomes file descriptor 3+i. + * + * ExtraFiles is not supported on Windows. + */ + extraFiles: Array<(os.File | undefined)> + /** + * SysProcAttr holds optional, operating system-specific attributes. + * Run passes it to os.StartProcess as the os.ProcAttr's Sys field. + */ + sysProcAttr?: syscall.SysProcAttr + /** + * Process is the underlying process, once started. + */ + process?: os.Process + /** + * ProcessState contains information about an exited process. + * If the process was started successfully, Wait or Run will + * populate its ProcessState when the command completes. + */ + processState?: os.ProcessState + err: Error // LookPath error, if any. + /** + * If Cancel is non-nil, the command must have been created with + * CommandContext and Cancel will be called when the command's + * Context is done. By default, CommandContext sets Cancel to + * call the Kill method on the command's Process. + * + * Typically a custom Cancel will send a signal to the command's + * Process, but it may instead take other actions to initiate cancellation, + * such as closing a stdin or stdout pipe or sending a shutdown request on a + * network socket. + * + * If the command exits with a success status after Cancel is + * called, and Cancel does not return an error equivalent to + * os.ErrProcessDone, then Wait and similar methods will return a non-nil + * error: either an error wrapping the one returned by Cancel, + * or the error from the Context. + * (If the command exits with a non-success status, or Cancel + * returns an error that wraps os.ErrProcessDone, Wait and similar methods + * continue to return the command's usual exit status.) + * + * If Cancel is set to nil, nothing will happen immediately when the command's + * Context is done, but a nonzero WaitDelay will still take effect. That may + * be useful, for example, to work around deadlocks in commands that do not + * support shutdown signals but are expected to always finish quickly. + * + * Cancel will not be called if Start returns a non-nil error. + */ + cancel: () => void + /** + * If WaitDelay is non-zero, it bounds the time spent waiting on two sources + * of unexpected delay in Wait: a child process that fails to exit after the + * associated Context is canceled, and a child process that exits but leaves + * its I/O pipes unclosed. + * + * The WaitDelay timer starts when either the associated Context is done or a + * call to Wait observes that the child process has exited, whichever occurs + * first. When the delay has elapsed, the command shuts down the child process + * and/or its I/O pipes. + * + * If the child process has failed to exit — perhaps because it ignored or + * failed to receive a shutdown signal from a Cancel function, or because no + * Cancel function was set — then it will be terminated using os.Process.Kill. + * + * Then, if the I/O pipes communicating with the child process are still open, + * those pipes are closed in order to unblock any goroutines currently blocked + * on Read or Write calls. + * + * If pipes are closed due to WaitDelay, no Cancel call has occurred, + * and the command has otherwise exited with a successful status, Wait and + * similar methods will return ErrWaitDelay instead of nil. + * + * If WaitDelay is zero (the default), I/O pipes will be read until EOF, + * which might not occur until orphaned subprocesses of the command have + * also closed their descriptors for the pipes. + */ + waitDelay: time.Duration + } + interface Cmd { + /** + * String returns a human-readable description of c. + * It is intended only for debugging. + * In particular, it is not suitable for use as input to a shell. + * The output of String may vary across Go releases. + */ + string(): string + } + interface Cmd { + /** + * Run starts the specified command and waits for it to complete. + * + * The returned error is nil if the command runs, has no problems + * copying stdin, stdout, and stderr, and exits with a zero exit + * status. + * + * If the command starts but does not complete successfully, the error is of + * type [*ExitError]. Other error types may be returned for other situations. + * + * If the calling goroutine has locked the operating system thread + * with [runtime.LockOSThread] and modified any inheritable OS-level + * thread state (for example, Linux or Plan 9 name spaces), the new + * process will inherit the caller's thread state. + */ + run(): void + } + interface Cmd { + /** + * Start starts the specified command but does not wait for it to complete. + * + * If Start returns successfully, the c.Process field will be set. + * + * After a successful call to Start the [Cmd.Wait] method must be called in + * order to release associated system resources. + */ + start(): void + } + interface Cmd { + /** + * Wait waits for the command to exit and waits for any copying to + * stdin or copying from stdout or stderr to complete. + * + * The command must have been started by [Cmd.Start]. + * + * The returned error is nil if the command runs, has no problems + * copying stdin, stdout, and stderr, and exits with a zero exit + * status. + * + * If the command fails to run or doesn't complete successfully, the + * error is of type [*ExitError]. Other error types may be + * returned for I/O problems. + * + * If any of c.Stdin, c.Stdout or c.Stderr are not an [*os.File], Wait also waits + * for the respective I/O loop copying to or from the process to complete. + * + * Wait releases any resources associated with the [Cmd]. + */ + wait(): void + } + interface Cmd { + /** + * Output runs the command and returns its standard output. + * Any returned error will usually be of type [*ExitError]. + * If c.Stderr was nil, Output populates [ExitError.Stderr]. + */ + output(): string|Array + } + interface Cmd { + /** + * CombinedOutput runs the command and returns its combined standard + * output and standard error. + */ + combinedOutput(): string|Array + } + interface Cmd { + /** + * StdinPipe returns a pipe that will be connected to the command's + * standard input when the command starts. + * The pipe will be closed automatically after [Cmd.Wait] sees the command exit. + * A caller need only call Close to force the pipe to close sooner. + * For example, if the command being run will not exit until standard input + * is closed, the caller must close the pipe. + */ + stdinPipe(): io.WriteCloser + } + interface Cmd { + /** + * StdoutPipe returns a pipe that will be connected to the command's + * standard output when the command starts. + * + * [Cmd.Wait] will close the pipe after seeing the command exit, so most callers + * need not close the pipe themselves. It is thus incorrect to call Wait + * before all reads from the pipe have completed. + * For the same reason, it is incorrect to call [Cmd.Run] when using StdoutPipe. + * See the example for idiomatic usage. + */ + stdoutPipe(): io.ReadCloser + } + interface Cmd { + /** + * StderrPipe returns a pipe that will be connected to the command's + * standard error when the command starts. + * + * [Cmd.Wait] will close the pipe after seeing the command exit, so most callers + * need not close the pipe themselves. It is thus incorrect to call Wait + * before all reads from the pipe have completed. + * For the same reason, it is incorrect to use [Cmd.Run] when using StderrPipe. + * See the StdoutPipe example for idiomatic usage. + */ + stderrPipe(): io.ReadCloser + } + interface Cmd { + /** + * Environ returns a copy of the environment in which the command would be run + * as it is currently configured. + */ + environ(): Array + } +} + +namespace mailer { + /** + * Message defines a generic email message struct. + */ + interface Message { + from: { address: string; name?: string; } + to: Array<{ address: string; name?: string; }> + bcc: Array<{ address: string; name?: string; }> + cc: Array<{ address: string; name?: string; }> + subject: string + html: string + text: string + headers: _TygojaDict + attachments: _TygojaDict + inlineAttachments: _TygojaDict + } + /** + * Mailer defines a base mail client interface. + */ + interface Mailer { + [key:string]: any; + /** + * Send sends an email with the provided Message. + */ + send(message: Message): void + } +} + /** * Package types implements some commonly used db serializable types * like datetime, json, etc. @@ -17722,6 +18080,1748 @@ namespace auth { } } +/** + * Package sql provides a generic interface around SQL (or SQL-like) + * databases. + * + * The sql package must be used in conjunction with a database driver. + * See https://golang.org/s/sqldrivers for a list of drivers. + * + * Drivers that do not support context cancellation will not return until + * after the query is completed. + * + * For usage examples, see the wiki page at + * https://golang.org/s/sqlwiki. + */ +namespace sql { + /** + * TxOptions holds the transaction options to be used in [DB.BeginTx]. + */ + interface TxOptions { + /** + * Isolation is the transaction isolation level. + * If zero, the driver or database's default level is used. + */ + isolation: IsolationLevel + readOnly: boolean + } + /** + * NullString represents a string that may be null. + * NullString implements the [Scanner] interface so + * it can be used as a scan destination: + * + * ``` + * var s NullString + * err := db.QueryRow("SELECT name FROM foo WHERE id=?", id).Scan(&s) + * ... + * if s.Valid { + * // use s.String + * } else { + * // NULL value + * } + * ``` + */ + interface NullString { + string: string + valid: boolean // Valid is true if String is not NULL + } + interface NullString { + /** + * Scan implements the [Scanner] interface. + */ + scan(value: any): void + } + interface NullString { + /** + * Value implements the [driver.Valuer] interface. + */ + value(): any + } + /** + * DB is a database handle representing a pool of zero or more + * underlying connections. It's safe for concurrent use by multiple + * goroutines. + * + * The sql package creates and frees connections automatically; it + * also maintains a free pool of idle connections. If the database has + * a concept of per-connection state, such state can be reliably observed + * within a transaction ([Tx]) or connection ([Conn]). Once [DB.Begin] is called, the + * returned [Tx] is bound to a single connection. Once [Tx.Commit] or + * [Tx.Rollback] is called on the transaction, that transaction's + * connection is returned to [DB]'s idle connection pool. The pool size + * can be controlled with [DB.SetMaxIdleConns]. + */ + interface DB { + } + interface DB { + /** + * PingContext verifies a connection to the database is still alive, + * establishing a connection if necessary. + */ + pingContext(ctx: context.Context): void + } + interface DB { + /** + * Ping verifies a connection to the database is still alive, + * establishing a connection if necessary. + * + * Ping uses [context.Background] internally; to specify the context, use + * [DB.PingContext]. + */ + ping(): void + } + interface DB { + /** + * Close closes the database and prevents new queries from starting. + * Close then waits for all queries that have started processing on the server + * to finish. + * + * It is rare to Close a [DB], as the [DB] handle is meant to be + * long-lived and shared between many goroutines. + */ + close(): void + } + interface DB { + /** + * SetMaxIdleConns sets the maximum number of connections in the idle + * connection pool. + * + * If MaxOpenConns is greater than 0 but less than the new MaxIdleConns, + * then the new MaxIdleConns will be reduced to match the MaxOpenConns limit. + * + * If n <= 0, no idle connections are retained. + * + * The default max idle connections is currently 2. This may change in + * a future release. + */ + setMaxIdleConns(n: number): void + } + interface DB { + /** + * SetMaxOpenConns sets the maximum number of open connections to the database. + * + * If MaxIdleConns is greater than 0 and the new MaxOpenConns is less than + * MaxIdleConns, then MaxIdleConns will be reduced to match the new + * MaxOpenConns limit. + * + * If n <= 0, then there is no limit on the number of open connections. + * The default is 0 (unlimited). + */ + setMaxOpenConns(n: number): void + } + interface DB { + /** + * SetConnMaxLifetime sets the maximum amount of time a connection may be reused. + * + * Expired connections may be closed lazily before reuse. + * + * If d <= 0, connections are not closed due to a connection's age. + */ + setConnMaxLifetime(d: time.Duration): void + } + interface DB { + /** + * SetConnMaxIdleTime sets the maximum amount of time a connection may be idle. + * + * Expired connections may be closed lazily before reuse. + * + * If d <= 0, connections are not closed due to a connection's idle time. + */ + setConnMaxIdleTime(d: time.Duration): void + } + interface DB { + /** + * Stats returns database statistics. + */ + stats(): DBStats + } + interface DB { + /** + * PrepareContext creates a prepared statement for later queries or executions. + * Multiple queries or executions may be run concurrently from the + * returned statement. + * The caller must call the statement's [*Stmt.Close] method + * when the statement is no longer needed. + * + * The provided context is used for the preparation of the statement, not for the + * execution of the statement. + */ + prepareContext(ctx: context.Context, query: string): (Stmt) + } + interface DB { + /** + * Prepare creates a prepared statement for later queries or executions. + * Multiple queries or executions may be run concurrently from the + * returned statement. + * The caller must call the statement's [*Stmt.Close] method + * when the statement is no longer needed. + * + * Prepare uses [context.Background] internally; to specify the context, use + * [DB.PrepareContext]. + */ + prepare(query: string): (Stmt) + } + interface DB { + /** + * ExecContext executes a query without returning any rows. + * The args are for any placeholder parameters in the query. + */ + execContext(ctx: context.Context, query: string, ...args: any[]): Result + } + interface DB { + /** + * Exec executes a query without returning any rows. + * The args are for any placeholder parameters in the query. + * + * Exec uses [context.Background] internally; to specify the context, use + * [DB.ExecContext]. + */ + exec(query: string, ...args: any[]): Result + } + interface DB { + /** + * QueryContext executes a query that returns rows, typically a SELECT. + * The args are for any placeholder parameters in the query. + */ + queryContext(ctx: context.Context, query: string, ...args: any[]): (Rows) + } + interface DB { + /** + * Query executes a query that returns rows, typically a SELECT. + * The args are for any placeholder parameters in the query. + * + * Query uses [context.Background] internally; to specify the context, use + * [DB.QueryContext]. + */ + query(query: string, ...args: any[]): (Rows) + } + interface DB { + /** + * QueryRowContext executes a query that is expected to return at most one row. + * QueryRowContext always returns a non-nil value. Errors are deferred until + * [Row]'s Scan method is called. + * If the query selects no rows, the [*Row.Scan] will return [ErrNoRows]. + * Otherwise, [*Row.Scan] scans the first selected row and discards + * the rest. + */ + queryRowContext(ctx: context.Context, query: string, ...args: any[]): (Row) + } + interface DB { + /** + * QueryRow executes a query that is expected to return at most one row. + * QueryRow always returns a non-nil value. Errors are deferred until + * [Row]'s Scan method is called. + * If the query selects no rows, the [*Row.Scan] will return [ErrNoRows]. + * Otherwise, [*Row.Scan] scans the first selected row and discards + * the rest. + * + * QueryRow uses [context.Background] internally; to specify the context, use + * [DB.QueryRowContext]. + */ + queryRow(query: string, ...args: any[]): (Row) + } + interface DB { + /** + * BeginTx starts a transaction. + * + * The provided context is used until the transaction is committed or rolled back. + * If the context is canceled, the sql package will roll back + * the transaction. [Tx.Commit] will return an error if the context provided to + * BeginTx is canceled. + * + * The provided [TxOptions] is optional and may be nil if defaults should be used. + * If a non-default isolation level is used that the driver doesn't support, + * an error will be returned. + */ + beginTx(ctx: context.Context, opts: TxOptions): (Tx) + } + interface DB { + /** + * Begin starts a transaction. The default isolation level is dependent on + * the driver. + * + * Begin uses [context.Background] internally; to specify the context, use + * [DB.BeginTx]. + */ + begin(): (Tx) + } + interface DB { + /** + * Driver returns the database's underlying driver. + */ + driver(): any + } + interface DB { + /** + * Conn returns a single connection by either opening a new connection + * or returning an existing connection from the connection pool. Conn will + * block until either a connection is returned or ctx is canceled. + * Queries run on the same Conn will be run in the same database session. + * + * Every Conn must be returned to the database pool after use by + * calling [Conn.Close]. + */ + conn(ctx: context.Context): (Conn) + } + /** + * Tx is an in-progress database transaction. + * + * A transaction must end with a call to [Tx.Commit] or [Tx.Rollback]. + * + * After a call to [Tx.Commit] or [Tx.Rollback], all operations on the + * transaction fail with [ErrTxDone]. + * + * The statements prepared for a transaction by calling + * the transaction's [Tx.Prepare] or [Tx.Stmt] methods are closed + * by the call to [Tx.Commit] or [Tx.Rollback]. + */ + interface Tx { + } + interface Tx { + /** + * Commit commits the transaction. + */ + commit(): void + } + interface Tx { + /** + * Rollback aborts the transaction. + */ + rollback(): void + } + interface Tx { + /** + * PrepareContext creates a prepared statement for use within a transaction. + * + * The returned statement operates within the transaction and will be closed + * when the transaction has been committed or rolled back. + * + * To use an existing prepared statement on this transaction, see [Tx.Stmt]. + * + * The provided context will be used for the preparation of the context, not + * for the execution of the returned statement. The returned statement + * will run in the transaction context. + */ + prepareContext(ctx: context.Context, query: string): (Stmt) + } + interface Tx { + /** + * Prepare creates a prepared statement for use within a transaction. + * + * The returned statement operates within the transaction and will be closed + * when the transaction has been committed or rolled back. + * + * To use an existing prepared statement on this transaction, see [Tx.Stmt]. + * + * Prepare uses [context.Background] internally; to specify the context, use + * [Tx.PrepareContext]. + */ + prepare(query: string): (Stmt) + } + interface Tx { + /** + * StmtContext returns a transaction-specific prepared statement from + * an existing statement. + * + * Example: + * + * ``` + * updateMoney, err := db.Prepare("UPDATE balance SET money=money+? WHERE id=?") + * ... + * tx, err := db.Begin() + * ... + * res, err := tx.StmtContext(ctx, updateMoney).Exec(123.45, 98293203) + * ``` + * + * The provided context is used for the preparation of the statement, not for the + * execution of the statement. + * + * The returned statement operates within the transaction and will be closed + * when the transaction has been committed or rolled back. + */ + stmtContext(ctx: context.Context, stmt: Stmt): (Stmt) + } + interface Tx { + /** + * Stmt returns a transaction-specific prepared statement from + * an existing statement. + * + * Example: + * + * ``` + * updateMoney, err := db.Prepare("UPDATE balance SET money=money+? WHERE id=?") + * ... + * tx, err := db.Begin() + * ... + * res, err := tx.Stmt(updateMoney).Exec(123.45, 98293203) + * ``` + * + * The returned statement operates within the transaction and will be closed + * when the transaction has been committed or rolled back. + * + * Stmt uses [context.Background] internally; to specify the context, use + * [Tx.StmtContext]. + */ + stmt(stmt: Stmt): (Stmt) + } + interface Tx { + /** + * ExecContext executes a query that doesn't return rows. + * For example: an INSERT and UPDATE. + */ + execContext(ctx: context.Context, query: string, ...args: any[]): Result + } + interface Tx { + /** + * Exec executes a query that doesn't return rows. + * For example: an INSERT and UPDATE. + * + * Exec uses [context.Background] internally; to specify the context, use + * [Tx.ExecContext]. + */ + exec(query: string, ...args: any[]): Result + } + interface Tx { + /** + * QueryContext executes a query that returns rows, typically a SELECT. + */ + queryContext(ctx: context.Context, query: string, ...args: any[]): (Rows) + } + interface Tx { + /** + * Query executes a query that returns rows, typically a SELECT. + * + * Query uses [context.Background] internally; to specify the context, use + * [Tx.QueryContext]. + */ + query(query: string, ...args: any[]): (Rows) + } + interface Tx { + /** + * QueryRowContext executes a query that is expected to return at most one row. + * QueryRowContext always returns a non-nil value. Errors are deferred until + * [Row]'s Scan method is called. + * If the query selects no rows, the [*Row.Scan] will return [ErrNoRows]. + * Otherwise, the [*Row.Scan] scans the first selected row and discards + * the rest. + */ + queryRowContext(ctx: context.Context, query: string, ...args: any[]): (Row) + } + interface Tx { + /** + * QueryRow executes a query that is expected to return at most one row. + * QueryRow always returns a non-nil value. Errors are deferred until + * [Row]'s Scan method is called. + * If the query selects no rows, the [*Row.Scan] will return [ErrNoRows]. + * Otherwise, the [*Row.Scan] scans the first selected row and discards + * the rest. + * + * QueryRow uses [context.Background] internally; to specify the context, use + * [Tx.QueryRowContext]. + */ + queryRow(query: string, ...args: any[]): (Row) + } + /** + * Stmt is a prepared statement. + * A Stmt is safe for concurrent use by multiple goroutines. + * + * If a Stmt is prepared on a [Tx] or [Conn], it will be bound to a single + * underlying connection forever. If the [Tx] or [Conn] closes, the Stmt will + * become unusable and all operations will return an error. + * If a Stmt is prepared on a [DB], it will remain usable for the lifetime of the + * [DB]. When the Stmt needs to execute on a new underlying connection, it will + * prepare itself on the new connection automatically. + */ + interface Stmt { + } + interface Stmt { + /** + * ExecContext executes a prepared statement with the given arguments and + * returns a [Result] summarizing the effect of the statement. + */ + execContext(ctx: context.Context, ...args: any[]): Result + } + interface Stmt { + /** + * Exec executes a prepared statement with the given arguments and + * returns a [Result] summarizing the effect of the statement. + * + * Exec uses [context.Background] internally; to specify the context, use + * [Stmt.ExecContext]. + */ + exec(...args: any[]): Result + } + interface Stmt { + /** + * QueryContext executes a prepared query statement with the given arguments + * and returns the query results as a [*Rows]. + */ + queryContext(ctx: context.Context, ...args: any[]): (Rows) + } + interface Stmt { + /** + * Query executes a prepared query statement with the given arguments + * and returns the query results as a *Rows. + * + * Query uses [context.Background] internally; to specify the context, use + * [Stmt.QueryContext]. + */ + query(...args: any[]): (Rows) + } + interface Stmt { + /** + * QueryRowContext executes a prepared query statement with the given arguments. + * If an error occurs during the execution of the statement, that error will + * be returned by a call to Scan on the returned [*Row], which is always non-nil. + * If the query selects no rows, the [*Row.Scan] will return [ErrNoRows]. + * Otherwise, the [*Row.Scan] scans the first selected row and discards + * the rest. + */ + queryRowContext(ctx: context.Context, ...args: any[]): (Row) + } + interface Stmt { + /** + * QueryRow executes a prepared query statement with the given arguments. + * If an error occurs during the execution of the statement, that error will + * be returned by a call to Scan on the returned [*Row], which is always non-nil. + * If the query selects no rows, the [*Row.Scan] will return [ErrNoRows]. + * Otherwise, the [*Row.Scan] scans the first selected row and discards + * the rest. + * + * Example usage: + * + * ``` + * var name string + * err := nameByUseridStmt.QueryRow(id).Scan(&name) + * ``` + * + * QueryRow uses [context.Background] internally; to specify the context, use + * [Stmt.QueryRowContext]. + */ + queryRow(...args: any[]): (Row) + } + interface Stmt { + /** + * Close closes the statement. + */ + close(): void + } + /** + * Rows is the result of a query. Its cursor starts before the first row + * of the result set. Use [Rows.Next] to advance from row to row. + */ + interface Rows { + } + interface Rows { + /** + * Next prepares the next result row for reading with the [Rows.Scan] method. It + * returns true on success, or false if there is no next result row or an error + * happened while preparing it. [Rows.Err] should be consulted to distinguish between + * the two cases. + * + * Every call to [Rows.Scan], even the first one, must be preceded by a call to [Rows.Next]. + */ + next(): boolean + } + interface Rows { + /** + * NextResultSet prepares the next result set for reading. It reports whether + * there is further result sets, or false if there is no further result set + * or if there is an error advancing to it. The [Rows.Err] method should be consulted + * to distinguish between the two cases. + * + * After calling NextResultSet, the [Rows.Next] method should always be called before + * scanning. If there are further result sets they may not have rows in the result + * set. + */ + nextResultSet(): boolean + } + interface Rows { + /** + * Err returns the error, if any, that was encountered during iteration. + * Err may be called after an explicit or implicit [Rows.Close]. + */ + err(): void + } + interface Rows { + /** + * Columns returns the column names. + * Columns returns an error if the rows are closed. + */ + columns(): Array + } + interface Rows { + /** + * ColumnTypes returns column information such as column type, length, + * and nullable. Some information may not be available from some drivers. + */ + columnTypes(): Array<(ColumnType | undefined)> + } + interface Rows { + /** + * Scan copies the columns in the current row into the values pointed + * at by dest. The number of values in dest must be the same as the + * number of columns in [Rows]. + * + * Scan converts columns read from the database into the following + * common Go types and special types provided by the sql package: + * + * ``` + * *string + * *[]byte + * *int, *int8, *int16, *int32, *int64 + * *uint, *uint8, *uint16, *uint32, *uint64 + * *bool + * *float32, *float64 + * *interface{} + * *RawBytes + * *Rows (cursor value) + * any type implementing Scanner (see Scanner docs) + * ``` + * + * In the most simple case, if the type of the value from the source + * column is an integer, bool or string type T and dest is of type *T, + * Scan simply assigns the value through the pointer. + * + * Scan also converts between string and numeric types, as long as no + * information would be lost. While Scan stringifies all numbers + * scanned from numeric database columns into *string, scans into + * numeric types are checked for overflow. For example, a float64 with + * value 300 or a string with value "300" can scan into a uint16, but + * not into a uint8, though float64(255) or "255" can scan into a + * uint8. One exception is that scans of some float64 numbers to + * strings may lose information when stringifying. In general, scan + * floating point columns into *float64. + * + * If a dest argument has type *[]byte, Scan saves in that argument a + * copy of the corresponding data. The copy is owned by the caller and + * can be modified and held indefinitely. The copy can be avoided by + * using an argument of type [*RawBytes] instead; see the documentation + * for [RawBytes] for restrictions on its use. + * + * If an argument has type *interface{}, Scan copies the value + * provided by the underlying driver without conversion. When scanning + * from a source value of type []byte to *interface{}, a copy of the + * slice is made and the caller owns the result. + * + * Source values of type [time.Time] may be scanned into values of type + * *time.Time, *interface{}, *string, or *[]byte. When converting to + * the latter two, [time.RFC3339Nano] is used. + * + * Source values of type bool may be scanned into types *bool, + * *interface{}, *string, *[]byte, or [*RawBytes]. + * + * For scanning into *bool, the source may be true, false, 1, 0, or + * string inputs parseable by [strconv.ParseBool]. + * + * Scan can also convert a cursor returned from a query, such as + * "select cursor(select * from my_table) from dual", into a + * [*Rows] value that can itself be scanned from. The parent + * select query will close any cursor [*Rows] if the parent [*Rows] is closed. + * + * If any of the first arguments implementing [Scanner] returns an error, + * that error will be wrapped in the returned error. + */ + scan(...dest: any[]): void + } + interface Rows { + /** + * Close closes the [Rows], preventing further enumeration. If [Rows.Next] is called + * and returns false and there are no further result sets, + * the [Rows] are closed automatically and it will suffice to check the + * result of [Rows.Err]. Close is idempotent and does not affect the result of [Rows.Err]. + */ + close(): void + } + /** + * A Result summarizes an executed SQL command. + */ + interface Result { + [key:string]: any; + /** + * LastInsertId returns the integer generated by the database + * in response to a command. Typically this will be from an + * "auto increment" column when inserting a new row. Not all + * databases support this feature, and the syntax of such + * statements varies. + */ + lastInsertId(): number + /** + * RowsAffected returns the number of rows affected by an + * update, insert, or delete. Not every database or database + * driver may support this. + */ + rowsAffected(): number + } +} + +namespace search { + /** + * Result defines the returned search result structure. + */ + interface Result { + items: any + page: number + perPage: number + totalItems: number + totalPages: number + } + /** + * ResolverResult defines a single FieldResolver.Resolve() successfully parsed result. + */ + interface ResolverResult { + /** + * Identifier is the plain SQL identifier/column that will be used + * in the final db expression as left or right operand. + */ + identifier: string + /** + * NoCoalesce instructs to not use COALESCE or NULL fallbacks + * when building the identifier expression. + */ + noCoalesce: boolean + /** + * Params is a map with db placeholder->value pairs that will be added + * to the query when building both resolved operands/sides in a single expression. + */ + params: dbx.Params + /** + * MultiMatchSubQuery is an optional sub query expression that will be added + * in addition to the combined ResolverResult expression during build. + */ + multiMatchSubQuery: dbx.Expression + /** + * AfterBuild is an optional function that will be called after building + * and combining the result of both resolved operands/sides in a single expression. + */ + afterBuild: (expr: dbx.Expression) => dbx.Expression + } +} + +/** + * Package blob defines a lightweight abstration for interacting with + * various storage services (local filesystem, S3, etc.). + * + * NB! + * For compatibility with earlier PocketBase versions and to prevent + * unnecessary breaking changes, this package is based and implemented + * as a minimal, stripped down version of the previously used gocloud.dev/blob. + * While there is no promise that it won't diverge in the future to accommodate + * better some PocketBase specific use cases, currently it copies and + * tries to follow as close as possible the same implementations, + * conventions and rules for the key escaping/unescaping, blob read/write + * interfaces and struct options as gocloud.dev/blob, therefore the + * credits goes to the original Go Cloud Development Kit Authors. + */ +namespace blob { + /** + * ListObject represents a single blob returned from List. + */ + interface ListObject { + /** + * Key is the key for this blob. + */ + key: string + /** + * ModTime is the time the blob was last modified. + */ + modTime: time.Time + /** + * Size is the size of the blob's content in bytes. + */ + size: number + /** + * MD5 is an MD5 hash of the blob contents or nil if not available. + */ + md5: string|Array + /** + * IsDir indicates that this result represents a "directory" in the + * hierarchical namespace, ending in ListOptions.Delimiter. Key can be + * passed as ListOptions.Prefix to list items in the "directory". + * Fields other than Key and IsDir will not be set if IsDir is true. + */ + isDir: boolean + } + /** + * Attributes contains attributes about a blob. + */ + interface Attributes { + /** + * CacheControl specifies caching attributes that services may use + * when serving the blob. + * https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Cache-Control + */ + cacheControl: string + /** + * ContentDisposition specifies whether the blob content is expected to be + * displayed inline or as an attachment. + * https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Disposition + */ + contentDisposition: string + /** + * ContentEncoding specifies the encoding used for the blob's content, if any. + * https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Encoding + */ + contentEncoding: string + /** + * ContentLanguage specifies the language used in the blob's content, if any. + * https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Language + */ + contentLanguage: string + /** + * ContentType is the MIME type of the blob. It will not be empty. + * https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Type + */ + contentType: string + /** + * Metadata holds key/value pairs associated with the blob. + * Keys are guaranteed to be in lowercase, even if the backend service + * has case-sensitive keys (although note that Metadata written via + * this package will always be lowercased). If there are duplicate + * case-insensitive keys (e.g., "foo" and "FOO"), only one value + * will be kept, and it is undefined which one. + */ + metadata: _TygojaDict + /** + * CreateTime is the time the blob was created, if available. If not available, + * CreateTime will be the zero time. + */ + createTime: time.Time + /** + * ModTime is the time the blob was last modified. + */ + modTime: time.Time + /** + * Size is the size of the blob's content in bytes. + */ + size: number + /** + * MD5 is an MD5 hash of the blob contents or nil if not available. + */ + md5: string|Array + /** + * ETag for the blob; see https://en.wikipedia.org/wiki/HTTP_ETag. + */ + eTag: string + } + /** + * Reader reads bytes from a blob. + * It implements io.ReadSeekCloser, and must be closed after reads are finished. + */ + interface Reader { + } + interface Reader { + /** + * Read implements io.Reader (https://golang.org/pkg/io/#Reader). + */ + read(p: string|Array): number + } + interface Reader { + /** + * Seek implements io.Seeker (https://golang.org/pkg/io/#Seeker). + */ + seek(offset: number, whence: number): number + } + interface Reader { + /** + * Close implements io.Closer (https://golang.org/pkg/io/#Closer). + */ + close(): void + } + interface Reader { + /** + * ContentType returns the MIME type of the blob. + */ + contentType(): string + } + interface Reader { + /** + * ModTime returns the time the blob was last modified. + */ + modTime(): time.Time + } + interface Reader { + /** + * Size returns the size of the blob content in bytes. + */ + size(): number + } + interface Reader { + /** + * WriteTo reads from r and writes to w until there's no more data or + * an error occurs. + * The return value is the number of bytes written to w. + * + * It implements the io.WriterTo interface. + */ + writeTo(w: io.Writer): number + } +} + +namespace router { + // @ts-ignore + import validation = ozzo_validation + /** + * ApiError defines the struct for a basic api error response. + */ + interface ApiError { + data: _TygojaDict + message: string + status: number + } + interface ApiError { + /** + * Error makes it compatible with the `error` interface. + */ + error(): string + } + interface ApiError { + /** + * RawData returns the unformatted error data (could be an internal error, text, etc.) + */ + rawData(): any + } + interface ApiError { + /** + * Is reports whether the current ApiError wraps the target. + */ + is(target: Error): boolean + } + /** + * Event specifies based Route handler event that is usually intended + * to be embedded as part of a custom event struct. + * + * NB! It is expected that the Response and Request fields are always set. + */ + type _sKUIjZn = hook.Event + interface Event extends _sKUIjZn { + response: http.ResponseWriter + request?: http.Request + } + interface Event { + /** + * Written reports whether the current response has already been written. + * + * This method always returns false if e.ResponseWritter doesn't implement the WriteTracker interface + * (all router package handlers receives a ResponseWritter that implements it unless explicitly replaced with a custom one). + */ + written(): boolean + } + interface Event { + /** + * Status reports the status code of the current response. + * + * This method always returns 0 if e.Response doesn't implement the StatusTracker interface + * (all router package handlers receives a ResponseWritter that implements it unless explicitly replaced with a custom one). + */ + status(): number + } + interface Event { + /** + * Flush flushes buffered data to the current response. + * + * Returns [http.ErrNotSupported] if e.Response doesn't implement the [http.Flusher] interface + * (all router package handlers receives a ResponseWritter that implements it unless explicitly replaced with a custom one). + */ + flush(): void + } + interface Event { + /** + * IsTLS reports whether the connection on which the request was received is TLS. + */ + isTLS(): boolean + } + interface Event { + /** + * SetCookie is an alias for [http.SetCookie]. + * + * SetCookie adds a Set-Cookie header to the current response's headers. + * The provided cookie must have a valid Name. + * Invalid cookies may be silently dropped. + */ + setCookie(cookie: http.Cookie): void + } + interface Event { + /** + * RemoteIP returns the IP address of the client that sent the request. + * + * IPv6 addresses are returned expanded. + * For example, "2001:db8::1" becomes "2001:0db8:0000:0000:0000:0000:0000:0001". + * + * Note that if you are behind reverse proxy(ies), this method returns + * the IP of the last connecting proxy. + */ + remoteIP(): string + } + interface Event { + /** + * FindUploadedFiles extracts all form files of "key" from a http request + * and returns a slice with filesystem.File instances (if any). + */ + findUploadedFiles(key: string): Array<(filesystem.File | undefined)> + } + interface Event { + /** + * Get retrieves single value from the current event data store. + */ + get(key: string): any + } + interface Event { + /** + * GetAll returns a copy of the current event data store. + */ + getAll(): _TygojaDict + } + interface Event { + /** + * Set saves single value into the current event data store. + */ + set(key: string, value: any): void + } + interface Event { + /** + * SetAll saves all items from m into the current event data store. + */ + setAll(m: _TygojaDict): void + } + interface Event { + /** + * String writes a plain string response. + */ + string(status: number, data: string): void + } + interface Event { + /** + * HTML writes an HTML response. + */ + html(status: number, data: string): void + } + interface Event { + /** + * JSON writes a JSON response. + * + * It also provides a generic response data fields picker if the "fields" query parameter is set. + * For example, if you are requesting `?fields=a,b` for `e.JSON(200, map[string]int{ "a":1, "b":2, "c":3 })`, + * it should result in a JSON response like: `{"a":1, "b": 2}`. + */ + json(status: number, data: any): void + } + interface Event { + /** + * XML writes an XML response. + * It automatically prepends the generic [xml.Header] string to the response. + */ + xml(status: number, data: any): void + } + interface Event { + /** + * Stream streams the specified reader into the response. + */ + stream(status: number, contentType: string, reader: io.Reader): void + } + interface Event { + /** + * Blob writes a blob (bytes slice) response. + */ + blob(status: number, contentType: string, b: string|Array): void + } + interface Event { + /** + * FileFS serves the specified filename from fsys. + * + * It is similar to [echo.FileFS] for consistency with earlier versions. + */ + fileFS(fsys: fs.FS, filename: string): void + } + interface Event { + /** + * NoContent writes a response with no body (ex. 204). + */ + noContent(status: number): void + } + interface Event { + /** + * Redirect writes a redirect response to the specified url. + * The status code must be in between 300 – 399 range. + */ + redirect(status: number, url: string): void + } + interface Event { + error(status: number, message: string, errData: any): (ApiError) + } + interface Event { + badRequestError(message: string, errData: any): (ApiError) + } + interface Event { + notFoundError(message: string, errData: any): (ApiError) + } + interface Event { + forbiddenError(message: string, errData: any): (ApiError) + } + interface Event { + unauthorizedError(message: string, errData: any): (ApiError) + } + interface Event { + tooManyRequestsError(message: string, errData: any): (ApiError) + } + interface Event { + internalServerError(message: string, errData: any): (ApiError) + } + interface Event { + /** + * BindBody unmarshal the request body into the provided dst. + * + * dst must be either a struct pointer or map[string]any. + * + * The rules how the body will be scanned depends on the request Content-Type. + * + * Currently the following Content-Types are supported: + * ``` + * - application/json + * - text/xml, application/xml + * - multipart/form-data, application/x-www-form-urlencoded + * ``` + * + * Respectively the following struct tags are supported (again, which one will be used depends on the Content-Type): + * ``` + * - "json" (json body)- uses the builtin Go json package for unmarshaling. + * - "xml" (xml body) - uses the builtin Go xml package for unmarshaling. + * - "form" (form data) - utilizes the custom [router.UnmarshalRequestData] method. + * ``` + * + * NB! When dst is a struct make sure that it doesn't have public fields + * that shouldn't be bindable and it is advisible such fields to be unexported + * or have a separate struct just for the binding. For example: + * + * ``` + * data := struct{ + * somethingPrivate string + * + * Title string `json:"title" form:"title"` + * Total int `json:"total" form:"total"` + * } + * err := e.BindBody(&data) + * ``` + */ + bindBody(dst: any): void + } + /** + * Router defines a thin wrapper around the standard Go [http.ServeMux] by + * adding support for routing sub-groups, middlewares and other common utils. + * + * Example: + * + * ``` + * r := NewRouter[*MyEvent](eventFactory) + * + * // middlewares + * r.BindFunc(m1, m2) + * + * // routes + * r.GET("/test", handler1) + * + * // sub-routers/groups + * api := r.Group("/api") + * api.GET("/admins", handler2) + * + * // generate a http.ServeMux instance based on the router configurations + * mux, _ := r.BuildMux() + * + * http.ListenAndServe("localhost:8090", mux) + * ``` + */ + type _sNMLrBw = RouterGroup + interface Router extends _sNMLrBw { + } +} + +/** + * Package slog provides structured logging, + * in which log records include a message, + * a severity level, and various other attributes + * expressed as key-value pairs. + * + * It defines a type, [Logger], + * which provides several methods (such as [Logger.Info] and [Logger.Error]) + * for reporting events of interest. + * + * Each Logger is associated with a [Handler]. + * A Logger output method creates a [Record] from the method arguments + * and passes it to the Handler, which decides how to handle it. + * There is a default Logger accessible through top-level functions + * (such as [Info] and [Error]) that call the corresponding Logger methods. + * + * A log record consists of a time, a level, a message, and a set of key-value + * pairs, where the keys are strings and the values may be of any type. + * As an example, + * + * ``` + * slog.Info("hello", "count", 3) + * ``` + * + * creates a record containing the time of the call, + * a level of Info, the message "hello", and a single + * pair with key "count" and value 3. + * + * The [Info] top-level function calls the [Logger.Info] method on the default Logger. + * In addition to [Logger.Info], there are methods for Debug, Warn and Error levels. + * Besides these convenience methods for common levels, + * there is also a [Logger.Log] method which takes the level as an argument. + * Each of these methods has a corresponding top-level function that uses the + * default logger. + * + * The default handler formats the log record's message, time, level, and attributes + * as a string and passes it to the [log] package. + * + * ``` + * 2022/11/08 15:28:26 INFO hello count=3 + * ``` + * + * For more control over the output format, create a logger with a different handler. + * This statement uses [New] to create a new logger with a [TextHandler] + * that writes structured records in text form to standard error: + * + * ``` + * logger := slog.New(slog.NewTextHandler(os.Stderr, nil)) + * ``` + * + * [TextHandler] output is a sequence of key=value pairs, easily and unambiguously + * parsed by machine. This statement: + * + * ``` + * logger.Info("hello", "count", 3) + * ``` + * + * produces this output: + * + * ``` + * time=2022-11-08T15:28:26.000-05:00 level=INFO msg=hello count=3 + * ``` + * + * The package also provides [JSONHandler], whose output is line-delimited JSON: + * + * ``` + * logger := slog.New(slog.NewJSONHandler(os.Stdout, nil)) + * logger.Info("hello", "count", 3) + * ``` + * + * produces this output: + * + * ``` + * {"time":"2022-11-08T15:28:26.000000000-05:00","level":"INFO","msg":"hello","count":3} + * ``` + * + * Both [TextHandler] and [JSONHandler] can be configured with [HandlerOptions]. + * There are options for setting the minimum level (see Levels, below), + * displaying the source file and line of the log call, and + * modifying attributes before they are logged. + * + * Setting a logger as the default with + * + * ``` + * slog.SetDefault(logger) + * ``` + * + * will cause the top-level functions like [Info] to use it. + * [SetDefault] also updates the default logger used by the [log] package, + * so that existing applications that use [log.Printf] and related functions + * will send log records to the logger's handler without needing to be rewritten. + * + * Some attributes are common to many log calls. + * For example, you may wish to include the URL or trace identifier of a server request + * with all log events arising from the request. + * Rather than repeat the attribute with every log call, you can use [Logger.With] + * to construct a new Logger containing the attributes: + * + * ``` + * logger2 := logger.With("url", r.URL) + * ``` + * + * The arguments to With are the same key-value pairs used in [Logger.Info]. + * The result is a new Logger with the same handler as the original, but additional + * attributes that will appear in the output of every call. + * + * # Levels + * + * A [Level] is an integer representing the importance or severity of a log event. + * The higher the level, the more severe the event. + * This package defines constants for the most common levels, + * but any int can be used as a level. + * + * In an application, you may wish to log messages only at a certain level or greater. + * One common configuration is to log messages at Info or higher levels, + * suppressing debug logging until it is needed. + * The built-in handlers can be configured with the minimum level to output by + * setting [HandlerOptions.Level]. + * The program's `main` function typically does this. + * The default value is LevelInfo. + * + * Setting the [HandlerOptions.Level] field to a [Level] value + * fixes the handler's minimum level throughout its lifetime. + * Setting it to a [LevelVar] allows the level to be varied dynamically. + * A LevelVar holds a Level and is safe to read or write from multiple + * goroutines. + * To vary the level dynamically for an entire program, first initialize + * a global LevelVar: + * + * ``` + * var programLevel = new(slog.LevelVar) // Info by default + * ``` + * + * Then use the LevelVar to construct a handler, and make it the default: + * + * ``` + * h := slog.NewJSONHandler(os.Stderr, &slog.HandlerOptions{Level: programLevel}) + * slog.SetDefault(slog.New(h)) + * ``` + * + * Now the program can change its logging level with a single statement: + * + * ``` + * programLevel.Set(slog.LevelDebug) + * ``` + * + * # Groups + * + * Attributes can be collected into groups. + * A group has a name that is used to qualify the names of its attributes. + * How this qualification is displayed depends on the handler. + * [TextHandler] separates the group and attribute names with a dot. + * [JSONHandler] treats each group as a separate JSON object, with the group name as the key. + * + * Use [Group] to create a Group attribute from a name and a list of key-value pairs: + * + * ``` + * slog.Group("request", + * "method", r.Method, + * "url", r.URL) + * ``` + * + * TextHandler would display this group as + * + * ``` + * request.method=GET request.url=http://example.com + * ``` + * + * JSONHandler would display it as + * + * ``` + * "request":{"method":"GET","url":"http://example.com"} + * ``` + * + * Use [Logger.WithGroup] to qualify all of a Logger's output + * with a group name. Calling WithGroup on a Logger results in a + * new Logger with the same Handler as the original, but with all + * its attributes qualified by the group name. + * + * This can help prevent duplicate attribute keys in large systems, + * where subsystems might use the same keys. + * Pass each subsystem a different Logger with its own group name so that + * potential duplicates are qualified: + * + * ``` + * logger := slog.Default().With("id", systemID) + * parserLogger := logger.WithGroup("parser") + * parseInput(input, parserLogger) + * ``` + * + * When parseInput logs with parserLogger, its keys will be qualified with "parser", + * so even if it uses the common key "id", the log line will have distinct keys. + * + * # Contexts + * + * Some handlers may wish to include information from the [context.Context] that is + * available at the call site. One example of such information + * is the identifier for the current span when tracing is enabled. + * + * The [Logger.Log] and [Logger.LogAttrs] methods take a context as a first + * argument, as do their corresponding top-level functions. + * + * Although the convenience methods on Logger (Info and so on) and the + * corresponding top-level functions do not take a context, the alternatives ending + * in "Context" do. For example, + * + * ``` + * slog.InfoContext(ctx, "message") + * ``` + * + * It is recommended to pass a context to an output method if one is available. + * + * # Attrs and Values + * + * An [Attr] is a key-value pair. The Logger output methods accept Attrs as well as + * alternating keys and values. The statement + * + * ``` + * slog.Info("hello", slog.Int("count", 3)) + * ``` + * + * behaves the same as + * + * ``` + * slog.Info("hello", "count", 3) + * ``` + * + * There are convenience constructors for [Attr] such as [Int], [String], and [Bool] + * for common types, as well as the function [Any] for constructing Attrs of any + * type. + * + * The value part of an Attr is a type called [Value]. + * Like an [any], a Value can hold any Go value, + * but it can represent typical values, including all numbers and strings, + * without an allocation. + * + * For the most efficient log output, use [Logger.LogAttrs]. + * It is similar to [Logger.Log] but accepts only Attrs, not alternating + * keys and values; this allows it, too, to avoid allocation. + * + * The call + * + * ``` + * logger.LogAttrs(ctx, slog.LevelInfo, "hello", slog.Int("count", 3)) + * ``` + * + * is the most efficient way to achieve the same output as + * + * ``` + * slog.InfoContext(ctx, "hello", "count", 3) + * ``` + * + * # Customizing a type's logging behavior + * + * If a type implements the [LogValuer] interface, the [Value] returned from its LogValue + * method is used for logging. You can use this to control how values of the type + * appear in logs. For example, you can redact secret information like passwords, + * or gather a struct's fields in a Group. See the examples under [LogValuer] for + * details. + * + * A LogValue method may return a Value that itself implements [LogValuer]. The [Value.Resolve] + * method handles these cases carefully, avoiding infinite loops and unbounded recursion. + * Handler authors and others may wish to use [Value.Resolve] instead of calling LogValue directly. + * + * # Wrapping output methods + * + * The logger functions use reflection over the call stack to find the file name + * and line number of the logging call within the application. This can produce + * incorrect source information for functions that wrap slog. For instance, if you + * define this function in file mylog.go: + * + * ``` + * func Infof(logger *slog.Logger, format string, args ...any) { + * logger.Info(fmt.Sprintf(format, args...)) + * } + * ``` + * + * and you call it like this in main.go: + * + * ``` + * Infof(slog.Default(), "hello, %s", "world") + * ``` + * + * then slog will report the source file as mylog.go, not main.go. + * + * A correct implementation of Infof will obtain the source location + * (pc) and pass it to NewRecord. + * The Infof function in the package-level example called "wrapping" + * demonstrates how to do this. + * + * # Working with Records + * + * Sometimes a Handler will need to modify a Record + * before passing it on to another Handler or backend. + * A Record contains a mixture of simple public fields (e.g. Time, Level, Message) + * and hidden fields that refer to state (such as attributes) indirectly. This + * means that modifying a simple copy of a Record (e.g. by calling + * [Record.Add] or [Record.AddAttrs] to add attributes) + * may have unexpected effects on the original. + * Before modifying a Record, use [Record.Clone] to + * create a copy that shares no state with the original, + * or create a new Record with [NewRecord] + * and build up its Attrs by traversing the old ones with [Record.Attrs]. + * + * # Performance considerations + * + * If profiling your application demonstrates that logging is taking significant time, + * the following suggestions may help. + * + * If many log lines have a common attribute, use [Logger.With] to create a Logger with + * that attribute. The built-in handlers will format that attribute only once, at the + * call to [Logger.With]. The [Handler] interface is designed to allow that optimization, + * and a well-written Handler should take advantage of it. + * + * The arguments to a log call are always evaluated, even if the log event is discarded. + * If possible, defer computation so that it happens only if the value is actually logged. + * For example, consider the call + * + * ``` + * slog.Info("starting request", "url", r.URL.String()) // may compute String unnecessarily + * ``` + * + * The URL.String method will be called even if the logger discards Info-level events. + * Instead, pass the URL directly: + * + * ``` + * slog.Info("starting request", "url", &r.URL) // calls URL.String only if needed + * ``` + * + * The built-in [TextHandler] will call its String method, but only + * if the log event is enabled. + * Avoiding the call to String also preserves the structure of the underlying value. + * For example [JSONHandler] emits the components of the parsed URL as a JSON object. + * If you want to avoid eagerly paying the cost of the String call + * without causing the handler to potentially inspect the structure of the value, + * wrap the value in a fmt.Stringer implementation that hides its Marshal methods. + * + * You can also use the [LogValuer] interface to avoid unnecessary work in disabled log + * calls. Say you need to log some expensive value: + * + * ``` + * slog.Debug("frobbing", "value", computeExpensiveValue(arg)) + * ``` + * + * Even if this line is disabled, computeExpensiveValue will be called. + * To avoid that, define a type implementing LogValuer: + * + * ``` + * type expensive struct { arg int } + * + * func (e expensive) LogValue() slog.Value { + * return slog.AnyValue(computeExpensiveValue(e.arg)) + * } + * ``` + * + * Then use a value of that type in log calls: + * + * ``` + * slog.Debug("frobbing", "value", expensive{arg}) + * ``` + * + * Now computeExpensiveValue will only be called when the line is enabled. + * + * The built-in handlers acquire a lock before calling [io.Writer.Write] + * to ensure that exactly one [Record] is written at a time in its entirety. + * Although each log record has a timestamp, + * the built-in handlers do not use that time to sort the written records. + * User-defined handlers are responsible for their own locking and sorting. + * + * # Writing a handler + * + * For a guide to writing a custom handler, see https://golang.org/s/slog-handler-guide. + */ +namespace slog { + // @ts-ignore + import loginternal = internal + /** + * A Logger records structured information about each call to its + * Log, Debug, Info, Warn, and Error methods. + * For each call, it creates a [Record] and passes it to a [Handler]. + * + * To create a new Logger, call [New] or a Logger method + * that begins "With". + */ + interface Logger { + } + interface Logger { + /** + * Handler returns l's Handler. + */ + handler(): Handler + } + interface Logger { + /** + * With returns a Logger that includes the given attributes + * in each output operation. Arguments are converted to + * attributes as if by [Logger.Log]. + */ + with(...args: any[]): (Logger) + } + interface Logger { + /** + * WithGroup returns a Logger that starts a group, if name is non-empty. + * The keys of all attributes added to the Logger will be qualified by the given + * name. (How that qualification happens depends on the [Handler.WithGroup] + * method of the Logger's Handler.) + * + * If name is empty, WithGroup returns the receiver. + */ + withGroup(name: string): (Logger) + } + interface Logger { + /** + * Enabled reports whether l emits log records at the given context and level. + */ + enabled(ctx: context.Context, level: Level): boolean + } + interface Logger { + /** + * Log emits a log record with the current time and the given level and message. + * The Record's Attrs consist of the Logger's attributes followed by + * the Attrs specified by args. + * + * The attribute arguments are processed as follows: + * ``` + * - If an argument is an Attr, it is used as is. + * - If an argument is a string and this is not the last argument, + * the following argument is treated as the value and the two are combined + * into an Attr. + * - Otherwise, the argument is treated as a value with key "!BADKEY". + * ``` + */ + log(ctx: context.Context, level: Level, msg: string, ...args: any[]): void + } + interface Logger { + /** + * LogAttrs is a more efficient version of [Logger.Log] that accepts only Attrs. + */ + logAttrs(ctx: context.Context, level: Level, msg: string, ...attrs: Attr[]): void + } + interface Logger { + /** + * Debug logs at [LevelDebug]. + */ + debug(msg: string, ...args: any[]): void + } + interface Logger { + /** + * DebugContext logs at [LevelDebug] with the given context. + */ + debugContext(ctx: context.Context, msg: string, ...args: any[]): void + } + interface Logger { + /** + * Info logs at [LevelInfo]. + */ + info(msg: string, ...args: any[]): void + } + interface Logger { + /** + * InfoContext logs at [LevelInfo] with the given context. + */ + infoContext(ctx: context.Context, msg: string, ...args: any[]): void + } + interface Logger { + /** + * Warn logs at [LevelWarn]. + */ + warn(msg: string, ...args: any[]): void + } + interface Logger { + /** + * WarnContext logs at [LevelWarn] with the given context. + */ + warnContext(ctx: context.Context, msg: string, ...args: any[]): void + } + interface Logger { + /** + * Error logs at [LevelError]. + */ + error(msg: string, ...args: any[]): void + } + interface Logger { + /** + * ErrorContext logs at [LevelError] with the given context. + */ + errorContext(ctx: context.Context, msg: string, ...args: any[]): void + } +} + +/** + * Package cron implements a crontab-like service to execute and schedule + * repeative tasks/jobs. + * + * Example: + * + * ``` + * c := cron.New() + * c.MustAdd("dailyReport", "0 0 * * *", func() { ... }) + * c.Start() + * ``` + */ +namespace cron { + /** + * Cron is a crontab-like struct for tasks/jobs scheduling. + */ + interface Cron { + } + interface Cron { + /** + * SetInterval changes the current cron tick interval + * (it usually should be >= 1 minute). + */ + setInterval(d: time.Duration): void + } + interface Cron { + /** + * SetTimezone changes the current cron tick timezone. + */ + setTimezone(l: time.Location): void + } + interface Cron { + /** + * MustAdd is similar to Add() but panic on failure. + */ + mustAdd(jobId: string, cronExpr: string, run: () => void): void + } + interface Cron { + /** + * Add registers a single cron job. + * + * If there is already a job with the provided id, then the old job + * will be replaced with the new one. + * + * cronExpr is a regular cron expression, eg. "0 *\/3 * * *" (aka. at minute 0 past every 3rd hour). + * Check cron.NewSchedule() for the supported tokens. + */ + add(jobId: string, cronExpr: string, fn: () => void): void + } + interface Cron { + /** + * Remove removes a single cron job by its id. + */ + remove(jobId: string): void + } + interface Cron { + /** + * RemoveAll removes all registered cron jobs. + */ + removeAll(): void + } + interface Cron { + /** + * Total returns the current total number of registered cron jobs. + */ + total(): number + } + interface Cron { + /** + * Jobs returns a shallow copy of the currently registered cron jobs. + */ + jobs(): Array<(Job | undefined)> + } + interface Cron { + /** + * Stop stops the current cron ticker (if not already). + * + * You can resume the ticker by calling Start(). + */ + stop(): void + } + interface Cron { + /** + * Start starts the cron ticker. + * + * Calling Start() on already started cron will restart the ticker. + */ + start(): void + } + interface Cron { + /** + * HasStarted checks whether the current Cron ticker has been started. + */ + hasStarted(): boolean + } +} + /** * Package cobra is a commander providing a simple interface to create powerful modern CLI interfaces. * In addition to providing an interface, Cobra simultaneously provides a controller to organize your application code. @@ -18804,2106 +20904,6 @@ namespace cobra { } } -/** - * Package cron implements a crontab-like service to execute and schedule - * repeative tasks/jobs. - * - * Example: - * - * ``` - * c := cron.New() - * c.MustAdd("dailyReport", "0 0 * * *", func() { ... }) - * c.Start() - * ``` - */ -namespace cron { - /** - * Cron is a crontab-like struct for tasks/jobs scheduling. - */ - interface Cron { - } - interface Cron { - /** - * SetInterval changes the current cron tick interval - * (it usually should be >= 1 minute). - */ - setInterval(d: time.Duration): void - } - interface Cron { - /** - * SetTimezone changes the current cron tick timezone. - */ - setTimezone(l: time.Location): void - } - interface Cron { - /** - * MustAdd is similar to Add() but panic on failure. - */ - mustAdd(jobId: string, cronExpr: string, run: () => void): void - } - interface Cron { - /** - * Add registers a single cron job. - * - * If there is already a job with the provided id, then the old job - * will be replaced with the new one. - * - * cronExpr is a regular cron expression, eg. "0 *\/3 * * *" (aka. at minute 0 past every 3rd hour). - * Check cron.NewSchedule() for the supported tokens. - */ - add(jobId: string, cronExpr: string, fn: () => void): void - } - interface Cron { - /** - * Remove removes a single cron job by its id. - */ - remove(jobId: string): void - } - interface Cron { - /** - * RemoveAll removes all registered cron jobs. - */ - removeAll(): void - } - interface Cron { - /** - * Total returns the current total number of registered cron jobs. - */ - total(): number - } - interface Cron { - /** - * Jobs returns a shallow copy of the currently registered cron jobs. - */ - jobs(): Array<(Job | undefined)> - } - interface Cron { - /** - * Stop stops the current cron ticker (if not already). - * - * You can resume the ticker by calling Start(). - */ - stop(): void - } - interface Cron { - /** - * Start starts the cron ticker. - * - * Calling Start() on already started cron will restart the ticker. - */ - start(): void - } - interface Cron { - /** - * HasStarted checks whether the current Cron ticker has been started. - */ - hasStarted(): boolean - } -} - -/** - * Package slog provides structured logging, - * in which log records include a message, - * a severity level, and various other attributes - * expressed as key-value pairs. - * - * It defines a type, [Logger], - * which provides several methods (such as [Logger.Info] and [Logger.Error]) - * for reporting events of interest. - * - * Each Logger is associated with a [Handler]. - * A Logger output method creates a [Record] from the method arguments - * and passes it to the Handler, which decides how to handle it. - * There is a default Logger accessible through top-level functions - * (such as [Info] and [Error]) that call the corresponding Logger methods. - * - * A log record consists of a time, a level, a message, and a set of key-value - * pairs, where the keys are strings and the values may be of any type. - * As an example, - * - * ``` - * slog.Info("hello", "count", 3) - * ``` - * - * creates a record containing the time of the call, - * a level of Info, the message "hello", and a single - * pair with key "count" and value 3. - * - * The [Info] top-level function calls the [Logger.Info] method on the default Logger. - * In addition to [Logger.Info], there are methods for Debug, Warn and Error levels. - * Besides these convenience methods for common levels, - * there is also a [Logger.Log] method which takes the level as an argument. - * Each of these methods has a corresponding top-level function that uses the - * default logger. - * - * The default handler formats the log record's message, time, level, and attributes - * as a string and passes it to the [log] package. - * - * ``` - * 2022/11/08 15:28:26 INFO hello count=3 - * ``` - * - * For more control over the output format, create a logger with a different handler. - * This statement uses [New] to create a new logger with a [TextHandler] - * that writes structured records in text form to standard error: - * - * ``` - * logger := slog.New(slog.NewTextHandler(os.Stderr, nil)) - * ``` - * - * [TextHandler] output is a sequence of key=value pairs, easily and unambiguously - * parsed by machine. This statement: - * - * ``` - * logger.Info("hello", "count", 3) - * ``` - * - * produces this output: - * - * ``` - * time=2022-11-08T15:28:26.000-05:00 level=INFO msg=hello count=3 - * ``` - * - * The package also provides [JSONHandler], whose output is line-delimited JSON: - * - * ``` - * logger := slog.New(slog.NewJSONHandler(os.Stdout, nil)) - * logger.Info("hello", "count", 3) - * ``` - * - * produces this output: - * - * ``` - * {"time":"2022-11-08T15:28:26.000000000-05:00","level":"INFO","msg":"hello","count":3} - * ``` - * - * Both [TextHandler] and [JSONHandler] can be configured with [HandlerOptions]. - * There are options for setting the minimum level (see Levels, below), - * displaying the source file and line of the log call, and - * modifying attributes before they are logged. - * - * Setting a logger as the default with - * - * ``` - * slog.SetDefault(logger) - * ``` - * - * will cause the top-level functions like [Info] to use it. - * [SetDefault] also updates the default logger used by the [log] package, - * so that existing applications that use [log.Printf] and related functions - * will send log records to the logger's handler without needing to be rewritten. - * - * Some attributes are common to many log calls. - * For example, you may wish to include the URL or trace identifier of a server request - * with all log events arising from the request. - * Rather than repeat the attribute with every log call, you can use [Logger.With] - * to construct a new Logger containing the attributes: - * - * ``` - * logger2 := logger.With("url", r.URL) - * ``` - * - * The arguments to With are the same key-value pairs used in [Logger.Info]. - * The result is a new Logger with the same handler as the original, but additional - * attributes that will appear in the output of every call. - * - * # Levels - * - * A [Level] is an integer representing the importance or severity of a log event. - * The higher the level, the more severe the event. - * This package defines constants for the most common levels, - * but any int can be used as a level. - * - * In an application, you may wish to log messages only at a certain level or greater. - * One common configuration is to log messages at Info or higher levels, - * suppressing debug logging until it is needed. - * The built-in handlers can be configured with the minimum level to output by - * setting [HandlerOptions.Level]. - * The program's `main` function typically does this. - * The default value is LevelInfo. - * - * Setting the [HandlerOptions.Level] field to a [Level] value - * fixes the handler's minimum level throughout its lifetime. - * Setting it to a [LevelVar] allows the level to be varied dynamically. - * A LevelVar holds a Level and is safe to read or write from multiple - * goroutines. - * To vary the level dynamically for an entire program, first initialize - * a global LevelVar: - * - * ``` - * var programLevel = new(slog.LevelVar) // Info by default - * ``` - * - * Then use the LevelVar to construct a handler, and make it the default: - * - * ``` - * h := slog.NewJSONHandler(os.Stderr, &slog.HandlerOptions{Level: programLevel}) - * slog.SetDefault(slog.New(h)) - * ``` - * - * Now the program can change its logging level with a single statement: - * - * ``` - * programLevel.Set(slog.LevelDebug) - * ``` - * - * # Groups - * - * Attributes can be collected into groups. - * A group has a name that is used to qualify the names of its attributes. - * How this qualification is displayed depends on the handler. - * [TextHandler] separates the group and attribute names with a dot. - * [JSONHandler] treats each group as a separate JSON object, with the group name as the key. - * - * Use [Group] to create a Group attribute from a name and a list of key-value pairs: - * - * ``` - * slog.Group("request", - * "method", r.Method, - * "url", r.URL) - * ``` - * - * TextHandler would display this group as - * - * ``` - * request.method=GET request.url=http://example.com - * ``` - * - * JSONHandler would display it as - * - * ``` - * "request":{"method":"GET","url":"http://example.com"} - * ``` - * - * Use [Logger.WithGroup] to qualify all of a Logger's output - * with a group name. Calling WithGroup on a Logger results in a - * new Logger with the same Handler as the original, but with all - * its attributes qualified by the group name. - * - * This can help prevent duplicate attribute keys in large systems, - * where subsystems might use the same keys. - * Pass each subsystem a different Logger with its own group name so that - * potential duplicates are qualified: - * - * ``` - * logger := slog.Default().With("id", systemID) - * parserLogger := logger.WithGroup("parser") - * parseInput(input, parserLogger) - * ``` - * - * When parseInput logs with parserLogger, its keys will be qualified with "parser", - * so even if it uses the common key "id", the log line will have distinct keys. - * - * # Contexts - * - * Some handlers may wish to include information from the [context.Context] that is - * available at the call site. One example of such information - * is the identifier for the current span when tracing is enabled. - * - * The [Logger.Log] and [Logger.LogAttrs] methods take a context as a first - * argument, as do their corresponding top-level functions. - * - * Although the convenience methods on Logger (Info and so on) and the - * corresponding top-level functions do not take a context, the alternatives ending - * in "Context" do. For example, - * - * ``` - * slog.InfoContext(ctx, "message") - * ``` - * - * It is recommended to pass a context to an output method if one is available. - * - * # Attrs and Values - * - * An [Attr] is a key-value pair. The Logger output methods accept Attrs as well as - * alternating keys and values. The statement - * - * ``` - * slog.Info("hello", slog.Int("count", 3)) - * ``` - * - * behaves the same as - * - * ``` - * slog.Info("hello", "count", 3) - * ``` - * - * There are convenience constructors for [Attr] such as [Int], [String], and [Bool] - * for common types, as well as the function [Any] for constructing Attrs of any - * type. - * - * The value part of an Attr is a type called [Value]. - * Like an [any], a Value can hold any Go value, - * but it can represent typical values, including all numbers and strings, - * without an allocation. - * - * For the most efficient log output, use [Logger.LogAttrs]. - * It is similar to [Logger.Log] but accepts only Attrs, not alternating - * keys and values; this allows it, too, to avoid allocation. - * - * The call - * - * ``` - * logger.LogAttrs(ctx, slog.LevelInfo, "hello", slog.Int("count", 3)) - * ``` - * - * is the most efficient way to achieve the same output as - * - * ``` - * slog.InfoContext(ctx, "hello", "count", 3) - * ``` - * - * # Customizing a type's logging behavior - * - * If a type implements the [LogValuer] interface, the [Value] returned from its LogValue - * method is used for logging. You can use this to control how values of the type - * appear in logs. For example, you can redact secret information like passwords, - * or gather a struct's fields in a Group. See the examples under [LogValuer] for - * details. - * - * A LogValue method may return a Value that itself implements [LogValuer]. The [Value.Resolve] - * method handles these cases carefully, avoiding infinite loops and unbounded recursion. - * Handler authors and others may wish to use [Value.Resolve] instead of calling LogValue directly. - * - * # Wrapping output methods - * - * The logger functions use reflection over the call stack to find the file name - * and line number of the logging call within the application. This can produce - * incorrect source information for functions that wrap slog. For instance, if you - * define this function in file mylog.go: - * - * ``` - * func Infof(logger *slog.Logger, format string, args ...any) { - * logger.Info(fmt.Sprintf(format, args...)) - * } - * ``` - * - * and you call it like this in main.go: - * - * ``` - * Infof(slog.Default(), "hello, %s", "world") - * ``` - * - * then slog will report the source file as mylog.go, not main.go. - * - * A correct implementation of Infof will obtain the source location - * (pc) and pass it to NewRecord. - * The Infof function in the package-level example called "wrapping" - * demonstrates how to do this. - * - * # Working with Records - * - * Sometimes a Handler will need to modify a Record - * before passing it on to another Handler or backend. - * A Record contains a mixture of simple public fields (e.g. Time, Level, Message) - * and hidden fields that refer to state (such as attributes) indirectly. This - * means that modifying a simple copy of a Record (e.g. by calling - * [Record.Add] or [Record.AddAttrs] to add attributes) - * may have unexpected effects on the original. - * Before modifying a Record, use [Record.Clone] to - * create a copy that shares no state with the original, - * or create a new Record with [NewRecord] - * and build up its Attrs by traversing the old ones with [Record.Attrs]. - * - * # Performance considerations - * - * If profiling your application demonstrates that logging is taking significant time, - * the following suggestions may help. - * - * If many log lines have a common attribute, use [Logger.With] to create a Logger with - * that attribute. The built-in handlers will format that attribute only once, at the - * call to [Logger.With]. The [Handler] interface is designed to allow that optimization, - * and a well-written Handler should take advantage of it. - * - * The arguments to a log call are always evaluated, even if the log event is discarded. - * If possible, defer computation so that it happens only if the value is actually logged. - * For example, consider the call - * - * ``` - * slog.Info("starting request", "url", r.URL.String()) // may compute String unnecessarily - * ``` - * - * The URL.String method will be called even if the logger discards Info-level events. - * Instead, pass the URL directly: - * - * ``` - * slog.Info("starting request", "url", &r.URL) // calls URL.String only if needed - * ``` - * - * The built-in [TextHandler] will call its String method, but only - * if the log event is enabled. - * Avoiding the call to String also preserves the structure of the underlying value. - * For example [JSONHandler] emits the components of the parsed URL as a JSON object. - * If you want to avoid eagerly paying the cost of the String call - * without causing the handler to potentially inspect the structure of the value, - * wrap the value in a fmt.Stringer implementation that hides its Marshal methods. - * - * You can also use the [LogValuer] interface to avoid unnecessary work in disabled log - * calls. Say you need to log some expensive value: - * - * ``` - * slog.Debug("frobbing", "value", computeExpensiveValue(arg)) - * ``` - * - * Even if this line is disabled, computeExpensiveValue will be called. - * To avoid that, define a type implementing LogValuer: - * - * ``` - * type expensive struct { arg int } - * - * func (e expensive) LogValue() slog.Value { - * return slog.AnyValue(computeExpensiveValue(e.arg)) - * } - * ``` - * - * Then use a value of that type in log calls: - * - * ``` - * slog.Debug("frobbing", "value", expensive{arg}) - * ``` - * - * Now computeExpensiveValue will only be called when the line is enabled. - * - * The built-in handlers acquire a lock before calling [io.Writer.Write] - * to ensure that exactly one [Record] is written at a time in its entirety. - * Although each log record has a timestamp, - * the built-in handlers do not use that time to sort the written records. - * User-defined handlers are responsible for their own locking and sorting. - * - * # Writing a handler - * - * For a guide to writing a custom handler, see https://golang.org/s/slog-handler-guide. - */ -namespace slog { - // @ts-ignore - import loginternal = internal - /** - * A Logger records structured information about each call to its - * Log, Debug, Info, Warn, and Error methods. - * For each call, it creates a [Record] and passes it to a [Handler]. - * - * To create a new Logger, call [New] or a Logger method - * that begins "With". - */ - interface Logger { - } - interface Logger { - /** - * Handler returns l's Handler. - */ - handler(): Handler - } - interface Logger { - /** - * With returns a Logger that includes the given attributes - * in each output operation. Arguments are converted to - * attributes as if by [Logger.Log]. - */ - with(...args: any[]): (Logger) - } - interface Logger { - /** - * WithGroup returns a Logger that starts a group, if name is non-empty. - * The keys of all attributes added to the Logger will be qualified by the given - * name. (How that qualification happens depends on the [Handler.WithGroup] - * method of the Logger's Handler.) - * - * If name is empty, WithGroup returns the receiver. - */ - withGroup(name: string): (Logger) - } - interface Logger { - /** - * Enabled reports whether l emits log records at the given context and level. - */ - enabled(ctx: context.Context, level: Level): boolean - } - interface Logger { - /** - * Log emits a log record with the current time and the given level and message. - * The Record's Attrs consist of the Logger's attributes followed by - * the Attrs specified by args. - * - * The attribute arguments are processed as follows: - * ``` - * - If an argument is an Attr, it is used as is. - * - If an argument is a string and this is not the last argument, - * the following argument is treated as the value and the two are combined - * into an Attr. - * - Otherwise, the argument is treated as a value with key "!BADKEY". - * ``` - */ - log(ctx: context.Context, level: Level, msg: string, ...args: any[]): void - } - interface Logger { - /** - * LogAttrs is a more efficient version of [Logger.Log] that accepts only Attrs. - */ - logAttrs(ctx: context.Context, level: Level, msg: string, ...attrs: Attr[]): void - } - interface Logger { - /** - * Debug logs at [LevelDebug]. - */ - debug(msg: string, ...args: any[]): void - } - interface Logger { - /** - * DebugContext logs at [LevelDebug] with the given context. - */ - debugContext(ctx: context.Context, msg: string, ...args: any[]): void - } - interface Logger { - /** - * Info logs at [LevelInfo]. - */ - info(msg: string, ...args: any[]): void - } - interface Logger { - /** - * InfoContext logs at [LevelInfo] with the given context. - */ - infoContext(ctx: context.Context, msg: string, ...args: any[]): void - } - interface Logger { - /** - * Warn logs at [LevelWarn]. - */ - warn(msg: string, ...args: any[]): void - } - interface Logger { - /** - * WarnContext logs at [LevelWarn] with the given context. - */ - warnContext(ctx: context.Context, msg: string, ...args: any[]): void - } - interface Logger { - /** - * Error logs at [LevelError]. - */ - error(msg: string, ...args: any[]): void - } - interface Logger { - /** - * ErrorContext logs at [LevelError] with the given context. - */ - errorContext(ctx: context.Context, msg: string, ...args: any[]): void - } -} - -/** - * Package sql provides a generic interface around SQL (or SQL-like) - * databases. - * - * The sql package must be used in conjunction with a database driver. - * See https://golang.org/s/sqldrivers for a list of drivers. - * - * Drivers that do not support context cancellation will not return until - * after the query is completed. - * - * For usage examples, see the wiki page at - * https://golang.org/s/sqlwiki. - */ -namespace sql { - /** - * TxOptions holds the transaction options to be used in [DB.BeginTx]. - */ - interface TxOptions { - /** - * Isolation is the transaction isolation level. - * If zero, the driver or database's default level is used. - */ - isolation: IsolationLevel - readOnly: boolean - } - /** - * NullString represents a string that may be null. - * NullString implements the [Scanner] interface so - * it can be used as a scan destination: - * - * ``` - * var s NullString - * err := db.QueryRow("SELECT name FROM foo WHERE id=?", id).Scan(&s) - * ... - * if s.Valid { - * // use s.String - * } else { - * // NULL value - * } - * ``` - */ - interface NullString { - string: string - valid: boolean // Valid is true if String is not NULL - } - interface NullString { - /** - * Scan implements the [Scanner] interface. - */ - scan(value: any): void - } - interface NullString { - /** - * Value implements the [driver.Valuer] interface. - */ - value(): any - } - /** - * DB is a database handle representing a pool of zero or more - * underlying connections. It's safe for concurrent use by multiple - * goroutines. - * - * The sql package creates and frees connections automatically; it - * also maintains a free pool of idle connections. If the database has - * a concept of per-connection state, such state can be reliably observed - * within a transaction ([Tx]) or connection ([Conn]). Once [DB.Begin] is called, the - * returned [Tx] is bound to a single connection. Once [Tx.Commit] or - * [Tx.Rollback] is called on the transaction, that transaction's - * connection is returned to [DB]'s idle connection pool. The pool size - * can be controlled with [DB.SetMaxIdleConns]. - */ - interface DB { - } - interface DB { - /** - * PingContext verifies a connection to the database is still alive, - * establishing a connection if necessary. - */ - pingContext(ctx: context.Context): void - } - interface DB { - /** - * Ping verifies a connection to the database is still alive, - * establishing a connection if necessary. - * - * Ping uses [context.Background] internally; to specify the context, use - * [DB.PingContext]. - */ - ping(): void - } - interface DB { - /** - * Close closes the database and prevents new queries from starting. - * Close then waits for all queries that have started processing on the server - * to finish. - * - * It is rare to Close a [DB], as the [DB] handle is meant to be - * long-lived and shared between many goroutines. - */ - close(): void - } - interface DB { - /** - * SetMaxIdleConns sets the maximum number of connections in the idle - * connection pool. - * - * If MaxOpenConns is greater than 0 but less than the new MaxIdleConns, - * then the new MaxIdleConns will be reduced to match the MaxOpenConns limit. - * - * If n <= 0, no idle connections are retained. - * - * The default max idle connections is currently 2. This may change in - * a future release. - */ - setMaxIdleConns(n: number): void - } - interface DB { - /** - * SetMaxOpenConns sets the maximum number of open connections to the database. - * - * If MaxIdleConns is greater than 0 and the new MaxOpenConns is less than - * MaxIdleConns, then MaxIdleConns will be reduced to match the new - * MaxOpenConns limit. - * - * If n <= 0, then there is no limit on the number of open connections. - * The default is 0 (unlimited). - */ - setMaxOpenConns(n: number): void - } - interface DB { - /** - * SetConnMaxLifetime sets the maximum amount of time a connection may be reused. - * - * Expired connections may be closed lazily before reuse. - * - * If d <= 0, connections are not closed due to a connection's age. - */ - setConnMaxLifetime(d: time.Duration): void - } - interface DB { - /** - * SetConnMaxIdleTime sets the maximum amount of time a connection may be idle. - * - * Expired connections may be closed lazily before reuse. - * - * If d <= 0, connections are not closed due to a connection's idle time. - */ - setConnMaxIdleTime(d: time.Duration): void - } - interface DB { - /** - * Stats returns database statistics. - */ - stats(): DBStats - } - interface DB { - /** - * PrepareContext creates a prepared statement for later queries or executions. - * Multiple queries or executions may be run concurrently from the - * returned statement. - * The caller must call the statement's [*Stmt.Close] method - * when the statement is no longer needed. - * - * The provided context is used for the preparation of the statement, not for the - * execution of the statement. - */ - prepareContext(ctx: context.Context, query: string): (Stmt) - } - interface DB { - /** - * Prepare creates a prepared statement for later queries or executions. - * Multiple queries or executions may be run concurrently from the - * returned statement. - * The caller must call the statement's [*Stmt.Close] method - * when the statement is no longer needed. - * - * Prepare uses [context.Background] internally; to specify the context, use - * [DB.PrepareContext]. - */ - prepare(query: string): (Stmt) - } - interface DB { - /** - * ExecContext executes a query without returning any rows. - * The args are for any placeholder parameters in the query. - */ - execContext(ctx: context.Context, query: string, ...args: any[]): Result - } - interface DB { - /** - * Exec executes a query without returning any rows. - * The args are for any placeholder parameters in the query. - * - * Exec uses [context.Background] internally; to specify the context, use - * [DB.ExecContext]. - */ - exec(query: string, ...args: any[]): Result - } - interface DB { - /** - * QueryContext executes a query that returns rows, typically a SELECT. - * The args are for any placeholder parameters in the query. - */ - queryContext(ctx: context.Context, query: string, ...args: any[]): (Rows) - } - interface DB { - /** - * Query executes a query that returns rows, typically a SELECT. - * The args are for any placeholder parameters in the query. - * - * Query uses [context.Background] internally; to specify the context, use - * [DB.QueryContext]. - */ - query(query: string, ...args: any[]): (Rows) - } - interface DB { - /** - * QueryRowContext executes a query that is expected to return at most one row. - * QueryRowContext always returns a non-nil value. Errors are deferred until - * [Row]'s Scan method is called. - * If the query selects no rows, the [*Row.Scan] will return [ErrNoRows]. - * Otherwise, [*Row.Scan] scans the first selected row and discards - * the rest. - */ - queryRowContext(ctx: context.Context, query: string, ...args: any[]): (Row) - } - interface DB { - /** - * QueryRow executes a query that is expected to return at most one row. - * QueryRow always returns a non-nil value. Errors are deferred until - * [Row]'s Scan method is called. - * If the query selects no rows, the [*Row.Scan] will return [ErrNoRows]. - * Otherwise, [*Row.Scan] scans the first selected row and discards - * the rest. - * - * QueryRow uses [context.Background] internally; to specify the context, use - * [DB.QueryRowContext]. - */ - queryRow(query: string, ...args: any[]): (Row) - } - interface DB { - /** - * BeginTx starts a transaction. - * - * The provided context is used until the transaction is committed or rolled back. - * If the context is canceled, the sql package will roll back - * the transaction. [Tx.Commit] will return an error if the context provided to - * BeginTx is canceled. - * - * The provided [TxOptions] is optional and may be nil if defaults should be used. - * If a non-default isolation level is used that the driver doesn't support, - * an error will be returned. - */ - beginTx(ctx: context.Context, opts: TxOptions): (Tx) - } - interface DB { - /** - * Begin starts a transaction. The default isolation level is dependent on - * the driver. - * - * Begin uses [context.Background] internally; to specify the context, use - * [DB.BeginTx]. - */ - begin(): (Tx) - } - interface DB { - /** - * Driver returns the database's underlying driver. - */ - driver(): any - } - interface DB { - /** - * Conn returns a single connection by either opening a new connection - * or returning an existing connection from the connection pool. Conn will - * block until either a connection is returned or ctx is canceled. - * Queries run on the same Conn will be run in the same database session. - * - * Every Conn must be returned to the database pool after use by - * calling [Conn.Close]. - */ - conn(ctx: context.Context): (Conn) - } - /** - * Tx is an in-progress database transaction. - * - * A transaction must end with a call to [Tx.Commit] or [Tx.Rollback]. - * - * After a call to [Tx.Commit] or [Tx.Rollback], all operations on the - * transaction fail with [ErrTxDone]. - * - * The statements prepared for a transaction by calling - * the transaction's [Tx.Prepare] or [Tx.Stmt] methods are closed - * by the call to [Tx.Commit] or [Tx.Rollback]. - */ - interface Tx { - } - interface Tx { - /** - * Commit commits the transaction. - */ - commit(): void - } - interface Tx { - /** - * Rollback aborts the transaction. - */ - rollback(): void - } - interface Tx { - /** - * PrepareContext creates a prepared statement for use within a transaction. - * - * The returned statement operates within the transaction and will be closed - * when the transaction has been committed or rolled back. - * - * To use an existing prepared statement on this transaction, see [Tx.Stmt]. - * - * The provided context will be used for the preparation of the context, not - * for the execution of the returned statement. The returned statement - * will run in the transaction context. - */ - prepareContext(ctx: context.Context, query: string): (Stmt) - } - interface Tx { - /** - * Prepare creates a prepared statement for use within a transaction. - * - * The returned statement operates within the transaction and will be closed - * when the transaction has been committed or rolled back. - * - * To use an existing prepared statement on this transaction, see [Tx.Stmt]. - * - * Prepare uses [context.Background] internally; to specify the context, use - * [Tx.PrepareContext]. - */ - prepare(query: string): (Stmt) - } - interface Tx { - /** - * StmtContext returns a transaction-specific prepared statement from - * an existing statement. - * - * Example: - * - * ``` - * updateMoney, err := db.Prepare("UPDATE balance SET money=money+? WHERE id=?") - * ... - * tx, err := db.Begin() - * ... - * res, err := tx.StmtContext(ctx, updateMoney).Exec(123.45, 98293203) - * ``` - * - * The provided context is used for the preparation of the statement, not for the - * execution of the statement. - * - * The returned statement operates within the transaction and will be closed - * when the transaction has been committed or rolled back. - */ - stmtContext(ctx: context.Context, stmt: Stmt): (Stmt) - } - interface Tx { - /** - * Stmt returns a transaction-specific prepared statement from - * an existing statement. - * - * Example: - * - * ``` - * updateMoney, err := db.Prepare("UPDATE balance SET money=money+? WHERE id=?") - * ... - * tx, err := db.Begin() - * ... - * res, err := tx.Stmt(updateMoney).Exec(123.45, 98293203) - * ``` - * - * The returned statement operates within the transaction and will be closed - * when the transaction has been committed or rolled back. - * - * Stmt uses [context.Background] internally; to specify the context, use - * [Tx.StmtContext]. - */ - stmt(stmt: Stmt): (Stmt) - } - interface Tx { - /** - * ExecContext executes a query that doesn't return rows. - * For example: an INSERT and UPDATE. - */ - execContext(ctx: context.Context, query: string, ...args: any[]): Result - } - interface Tx { - /** - * Exec executes a query that doesn't return rows. - * For example: an INSERT and UPDATE. - * - * Exec uses [context.Background] internally; to specify the context, use - * [Tx.ExecContext]. - */ - exec(query: string, ...args: any[]): Result - } - interface Tx { - /** - * QueryContext executes a query that returns rows, typically a SELECT. - */ - queryContext(ctx: context.Context, query: string, ...args: any[]): (Rows) - } - interface Tx { - /** - * Query executes a query that returns rows, typically a SELECT. - * - * Query uses [context.Background] internally; to specify the context, use - * [Tx.QueryContext]. - */ - query(query: string, ...args: any[]): (Rows) - } - interface Tx { - /** - * QueryRowContext executes a query that is expected to return at most one row. - * QueryRowContext always returns a non-nil value. Errors are deferred until - * [Row]'s Scan method is called. - * If the query selects no rows, the [*Row.Scan] will return [ErrNoRows]. - * Otherwise, the [*Row.Scan] scans the first selected row and discards - * the rest. - */ - queryRowContext(ctx: context.Context, query: string, ...args: any[]): (Row) - } - interface Tx { - /** - * QueryRow executes a query that is expected to return at most one row. - * QueryRow always returns a non-nil value. Errors are deferred until - * [Row]'s Scan method is called. - * If the query selects no rows, the [*Row.Scan] will return [ErrNoRows]. - * Otherwise, the [*Row.Scan] scans the first selected row and discards - * the rest. - * - * QueryRow uses [context.Background] internally; to specify the context, use - * [Tx.QueryRowContext]. - */ - queryRow(query: string, ...args: any[]): (Row) - } - /** - * Stmt is a prepared statement. - * A Stmt is safe for concurrent use by multiple goroutines. - * - * If a Stmt is prepared on a [Tx] or [Conn], it will be bound to a single - * underlying connection forever. If the [Tx] or [Conn] closes, the Stmt will - * become unusable and all operations will return an error. - * If a Stmt is prepared on a [DB], it will remain usable for the lifetime of the - * [DB]. When the Stmt needs to execute on a new underlying connection, it will - * prepare itself on the new connection automatically. - */ - interface Stmt { - } - interface Stmt { - /** - * ExecContext executes a prepared statement with the given arguments and - * returns a [Result] summarizing the effect of the statement. - */ - execContext(ctx: context.Context, ...args: any[]): Result - } - interface Stmt { - /** - * Exec executes a prepared statement with the given arguments and - * returns a [Result] summarizing the effect of the statement. - * - * Exec uses [context.Background] internally; to specify the context, use - * [Stmt.ExecContext]. - */ - exec(...args: any[]): Result - } - interface Stmt { - /** - * QueryContext executes a prepared query statement with the given arguments - * and returns the query results as a [*Rows]. - */ - queryContext(ctx: context.Context, ...args: any[]): (Rows) - } - interface Stmt { - /** - * Query executes a prepared query statement with the given arguments - * and returns the query results as a *Rows. - * - * Query uses [context.Background] internally; to specify the context, use - * [Stmt.QueryContext]. - */ - query(...args: any[]): (Rows) - } - interface Stmt { - /** - * QueryRowContext executes a prepared query statement with the given arguments. - * If an error occurs during the execution of the statement, that error will - * be returned by a call to Scan on the returned [*Row], which is always non-nil. - * If the query selects no rows, the [*Row.Scan] will return [ErrNoRows]. - * Otherwise, the [*Row.Scan] scans the first selected row and discards - * the rest. - */ - queryRowContext(ctx: context.Context, ...args: any[]): (Row) - } - interface Stmt { - /** - * QueryRow executes a prepared query statement with the given arguments. - * If an error occurs during the execution of the statement, that error will - * be returned by a call to Scan on the returned [*Row], which is always non-nil. - * If the query selects no rows, the [*Row.Scan] will return [ErrNoRows]. - * Otherwise, the [*Row.Scan] scans the first selected row and discards - * the rest. - * - * Example usage: - * - * ``` - * var name string - * err := nameByUseridStmt.QueryRow(id).Scan(&name) - * ``` - * - * QueryRow uses [context.Background] internally; to specify the context, use - * [Stmt.QueryRowContext]. - */ - queryRow(...args: any[]): (Row) - } - interface Stmt { - /** - * Close closes the statement. - */ - close(): void - } - /** - * Rows is the result of a query. Its cursor starts before the first row - * of the result set. Use [Rows.Next] to advance from row to row. - */ - interface Rows { - } - interface Rows { - /** - * Next prepares the next result row for reading with the [Rows.Scan] method. It - * returns true on success, or false if there is no next result row or an error - * happened while preparing it. [Rows.Err] should be consulted to distinguish between - * the two cases. - * - * Every call to [Rows.Scan], even the first one, must be preceded by a call to [Rows.Next]. - */ - next(): boolean - } - interface Rows { - /** - * NextResultSet prepares the next result set for reading. It reports whether - * there is further result sets, or false if there is no further result set - * or if there is an error advancing to it. The [Rows.Err] method should be consulted - * to distinguish between the two cases. - * - * After calling NextResultSet, the [Rows.Next] method should always be called before - * scanning. If there are further result sets they may not have rows in the result - * set. - */ - nextResultSet(): boolean - } - interface Rows { - /** - * Err returns the error, if any, that was encountered during iteration. - * Err may be called after an explicit or implicit [Rows.Close]. - */ - err(): void - } - interface Rows { - /** - * Columns returns the column names. - * Columns returns an error if the rows are closed. - */ - columns(): Array - } - interface Rows { - /** - * ColumnTypes returns column information such as column type, length, - * and nullable. Some information may not be available from some drivers. - */ - columnTypes(): Array<(ColumnType | undefined)> - } - interface Rows { - /** - * Scan copies the columns in the current row into the values pointed - * at by dest. The number of values in dest must be the same as the - * number of columns in [Rows]. - * - * Scan converts columns read from the database into the following - * common Go types and special types provided by the sql package: - * - * ``` - * *string - * *[]byte - * *int, *int8, *int16, *int32, *int64 - * *uint, *uint8, *uint16, *uint32, *uint64 - * *bool - * *float32, *float64 - * *interface{} - * *RawBytes - * *Rows (cursor value) - * any type implementing Scanner (see Scanner docs) - * ``` - * - * In the most simple case, if the type of the value from the source - * column is an integer, bool or string type T and dest is of type *T, - * Scan simply assigns the value through the pointer. - * - * Scan also converts between string and numeric types, as long as no - * information would be lost. While Scan stringifies all numbers - * scanned from numeric database columns into *string, scans into - * numeric types are checked for overflow. For example, a float64 with - * value 300 or a string with value "300" can scan into a uint16, but - * not into a uint8, though float64(255) or "255" can scan into a - * uint8. One exception is that scans of some float64 numbers to - * strings may lose information when stringifying. In general, scan - * floating point columns into *float64. - * - * If a dest argument has type *[]byte, Scan saves in that argument a - * copy of the corresponding data. The copy is owned by the caller and - * can be modified and held indefinitely. The copy can be avoided by - * using an argument of type [*RawBytes] instead; see the documentation - * for [RawBytes] for restrictions on its use. - * - * If an argument has type *interface{}, Scan copies the value - * provided by the underlying driver without conversion. When scanning - * from a source value of type []byte to *interface{}, a copy of the - * slice is made and the caller owns the result. - * - * Source values of type [time.Time] may be scanned into values of type - * *time.Time, *interface{}, *string, or *[]byte. When converting to - * the latter two, [time.RFC3339Nano] is used. - * - * Source values of type bool may be scanned into types *bool, - * *interface{}, *string, *[]byte, or [*RawBytes]. - * - * For scanning into *bool, the source may be true, false, 1, 0, or - * string inputs parseable by [strconv.ParseBool]. - * - * Scan can also convert a cursor returned from a query, such as - * "select cursor(select * from my_table) from dual", into a - * [*Rows] value that can itself be scanned from. The parent - * select query will close any cursor [*Rows] if the parent [*Rows] is closed. - * - * If any of the first arguments implementing [Scanner] returns an error, - * that error will be wrapped in the returned error. - */ - scan(...dest: any[]): void - } - interface Rows { - /** - * Close closes the [Rows], preventing further enumeration. If [Rows.Next] is called - * and returns false and there are no further result sets, - * the [Rows] are closed automatically and it will suffice to check the - * result of [Rows.Err]. Close is idempotent and does not affect the result of [Rows.Err]. - */ - close(): void - } - /** - * A Result summarizes an executed SQL command. - */ - interface Result { - [key:string]: any; - /** - * LastInsertId returns the integer generated by the database - * in response to a command. Typically this will be from an - * "auto increment" column when inserting a new row. Not all - * databases support this feature, and the syntax of such - * statements varies. - */ - lastInsertId(): number - /** - * RowsAffected returns the number of rows affected by an - * update, insert, or delete. Not every database or database - * driver may support this. - */ - rowsAffected(): number - } -} - -namespace exec { - /** - * Cmd represents an external command being prepared or run. - * - * A Cmd cannot be reused after calling its [Cmd.Run], [Cmd.Output] or [Cmd.CombinedOutput] - * methods. - */ - interface Cmd { - /** - * Path is the path of the command to run. - * - * This is the only field that must be set to a non-zero - * value. If Path is relative, it is evaluated relative - * to Dir. - */ - path: string - /** - * Args holds command line arguments, including the command as Args[0]. - * If the Args field is empty or nil, Run uses {Path}. - * - * In typical use, both Path and Args are set by calling Command. - */ - args: Array - /** - * Env specifies the environment of the process. - * Each entry is of the form "key=value". - * If Env is nil, the new process uses the current process's - * environment. - * If Env contains duplicate environment keys, only the last - * value in the slice for each duplicate key is used. - * As a special case on Windows, SYSTEMROOT is always added if - * missing and not explicitly set to the empty string. - */ - env: Array - /** - * Dir specifies the working directory of the command. - * If Dir is the empty string, Run runs the command in the - * calling process's current directory. - */ - dir: string - /** - * Stdin specifies the process's standard input. - * - * If Stdin is nil, the process reads from the null device (os.DevNull). - * - * If Stdin is an *os.File, the process's standard input is connected - * directly to that file. - * - * Otherwise, during the execution of the command a separate - * goroutine reads from Stdin and delivers that data to the command - * over a pipe. In this case, Wait does not complete until the goroutine - * stops copying, either because it has reached the end of Stdin - * (EOF or a read error), or because writing to the pipe returned an error, - * or because a nonzero WaitDelay was set and expired. - */ - stdin: io.Reader - /** - * Stdout and Stderr specify the process's standard output and error. - * - * If either is nil, Run connects the corresponding file descriptor - * to the null device (os.DevNull). - * - * If either is an *os.File, the corresponding output from the process - * is connected directly to that file. - * - * Otherwise, during the execution of the command a separate goroutine - * reads from the process over a pipe and delivers that data to the - * corresponding Writer. In this case, Wait does not complete until the - * goroutine reaches EOF or encounters an error or a nonzero WaitDelay - * expires. - * - * If Stdout and Stderr are the same writer, and have a type that can - * be compared with ==, at most one goroutine at a time will call Write. - */ - stdout: io.Writer - stderr: io.Writer - /** - * ExtraFiles specifies additional open files to be inherited by the - * new process. It does not include standard input, standard output, or - * standard error. If non-nil, entry i becomes file descriptor 3+i. - * - * ExtraFiles is not supported on Windows. - */ - extraFiles: Array<(os.File | undefined)> - /** - * SysProcAttr holds optional, operating system-specific attributes. - * Run passes it to os.StartProcess as the os.ProcAttr's Sys field. - */ - sysProcAttr?: syscall.SysProcAttr - /** - * Process is the underlying process, once started. - */ - process?: os.Process - /** - * ProcessState contains information about an exited process. - * If the process was started successfully, Wait or Run will - * populate its ProcessState when the command completes. - */ - processState?: os.ProcessState - err: Error // LookPath error, if any. - /** - * If Cancel is non-nil, the command must have been created with - * CommandContext and Cancel will be called when the command's - * Context is done. By default, CommandContext sets Cancel to - * call the Kill method on the command's Process. - * - * Typically a custom Cancel will send a signal to the command's - * Process, but it may instead take other actions to initiate cancellation, - * such as closing a stdin or stdout pipe or sending a shutdown request on a - * network socket. - * - * If the command exits with a success status after Cancel is - * called, and Cancel does not return an error equivalent to - * os.ErrProcessDone, then Wait and similar methods will return a non-nil - * error: either an error wrapping the one returned by Cancel, - * or the error from the Context. - * (If the command exits with a non-success status, or Cancel - * returns an error that wraps os.ErrProcessDone, Wait and similar methods - * continue to return the command's usual exit status.) - * - * If Cancel is set to nil, nothing will happen immediately when the command's - * Context is done, but a nonzero WaitDelay will still take effect. That may - * be useful, for example, to work around deadlocks in commands that do not - * support shutdown signals but are expected to always finish quickly. - * - * Cancel will not be called if Start returns a non-nil error. - */ - cancel: () => void - /** - * If WaitDelay is non-zero, it bounds the time spent waiting on two sources - * of unexpected delay in Wait: a child process that fails to exit after the - * associated Context is canceled, and a child process that exits but leaves - * its I/O pipes unclosed. - * - * The WaitDelay timer starts when either the associated Context is done or a - * call to Wait observes that the child process has exited, whichever occurs - * first. When the delay has elapsed, the command shuts down the child process - * and/or its I/O pipes. - * - * If the child process has failed to exit — perhaps because it ignored or - * failed to receive a shutdown signal from a Cancel function, or because no - * Cancel function was set — then it will be terminated using os.Process.Kill. - * - * Then, if the I/O pipes communicating with the child process are still open, - * those pipes are closed in order to unblock any goroutines currently blocked - * on Read or Write calls. - * - * If pipes are closed due to WaitDelay, no Cancel call has occurred, - * and the command has otherwise exited with a successful status, Wait and - * similar methods will return ErrWaitDelay instead of nil. - * - * If WaitDelay is zero (the default), I/O pipes will be read until EOF, - * which might not occur until orphaned subprocesses of the command have - * also closed their descriptors for the pipes. - */ - waitDelay: time.Duration - } - interface Cmd { - /** - * String returns a human-readable description of c. - * It is intended only for debugging. - * In particular, it is not suitable for use as input to a shell. - * The output of String may vary across Go releases. - */ - string(): string - } - interface Cmd { - /** - * Run starts the specified command and waits for it to complete. - * - * The returned error is nil if the command runs, has no problems - * copying stdin, stdout, and stderr, and exits with a zero exit - * status. - * - * If the command starts but does not complete successfully, the error is of - * type [*ExitError]. Other error types may be returned for other situations. - * - * If the calling goroutine has locked the operating system thread - * with [runtime.LockOSThread] and modified any inheritable OS-level - * thread state (for example, Linux or Plan 9 name spaces), the new - * process will inherit the caller's thread state. - */ - run(): void - } - interface Cmd { - /** - * Start starts the specified command but does not wait for it to complete. - * - * If Start returns successfully, the c.Process field will be set. - * - * After a successful call to Start the [Cmd.Wait] method must be called in - * order to release associated system resources. - */ - start(): void - } - interface Cmd { - /** - * Wait waits for the command to exit and waits for any copying to - * stdin or copying from stdout or stderr to complete. - * - * The command must have been started by [Cmd.Start]. - * - * The returned error is nil if the command runs, has no problems - * copying stdin, stdout, and stderr, and exits with a zero exit - * status. - * - * If the command fails to run or doesn't complete successfully, the - * error is of type [*ExitError]. Other error types may be - * returned for I/O problems. - * - * If any of c.Stdin, c.Stdout or c.Stderr are not an [*os.File], Wait also waits - * for the respective I/O loop copying to or from the process to complete. - * - * Wait releases any resources associated with the [Cmd]. - */ - wait(): void - } - interface Cmd { - /** - * Output runs the command and returns its standard output. - * Any returned error will usually be of type [*ExitError]. - * If c.Stderr was nil, Output populates [ExitError.Stderr]. - */ - output(): string|Array - } - interface Cmd { - /** - * CombinedOutput runs the command and returns its combined standard - * output and standard error. - */ - combinedOutput(): string|Array - } - interface Cmd { - /** - * StdinPipe returns a pipe that will be connected to the command's - * standard input when the command starts. - * The pipe will be closed automatically after [Cmd.Wait] sees the command exit. - * A caller need only call Close to force the pipe to close sooner. - * For example, if the command being run will not exit until standard input - * is closed, the caller must close the pipe. - */ - stdinPipe(): io.WriteCloser - } - interface Cmd { - /** - * StdoutPipe returns a pipe that will be connected to the command's - * standard output when the command starts. - * - * [Cmd.Wait] will close the pipe after seeing the command exit, so most callers - * need not close the pipe themselves. It is thus incorrect to call Wait - * before all reads from the pipe have completed. - * For the same reason, it is incorrect to call [Cmd.Run] when using StdoutPipe. - * See the example for idiomatic usage. - */ - stdoutPipe(): io.ReadCloser - } - interface Cmd { - /** - * StderrPipe returns a pipe that will be connected to the command's - * standard error when the command starts. - * - * [Cmd.Wait] will close the pipe after seeing the command exit, so most callers - * need not close the pipe themselves. It is thus incorrect to call Wait - * before all reads from the pipe have completed. - * For the same reason, it is incorrect to use [Cmd.Run] when using StderrPipe. - * See the StdoutPipe example for idiomatic usage. - */ - stderrPipe(): io.ReadCloser - } - interface Cmd { - /** - * Environ returns a copy of the environment in which the command would be run - * as it is currently configured. - */ - environ(): Array - } -} - -namespace store { - /** - * Store defines a concurrent safe in memory key-value data store. - */ - interface Store { - } - interface Store { - /** - * Reset clears the store and replaces the store data with a - * shallow copy of the provided newData. - */ - reset(newData: _TygojaDict): void - } - interface Store { - /** - * Length returns the current number of elements in the store. - */ - length(): number - } - interface Store { - /** - * RemoveAll removes all the existing store entries. - */ - removeAll(): void - } - interface Store { - /** - * Remove removes a single entry from the store. - * - * Remove does nothing if key doesn't exist in the store. - */ - remove(key: K): void - } - interface Store { - /** - * Has checks if element with the specified key exist or not. - */ - has(key: K): boolean - } - interface Store { - /** - * Get returns a single element value from the store. - * - * If key is not set, the zero T value is returned. - */ - get(key: K): T - } - interface Store { - /** - * GetOk is similar to Get but returns also a boolean indicating whether the key exists or not. - */ - getOk(key: K): [T, boolean] - } - interface Store { - /** - * GetAll returns a shallow copy of the current store data. - */ - getAll(): _TygojaDict - } - interface Store { - /** - * Values returns a slice with all of the current store values. - */ - values(): Array - } - interface Store { - /** - * Set sets (or overwrite if already exists) a new value for key. - */ - set(key: K, value: T): void - } - interface Store { - /** - * SetFunc sets (or overwrite if already exists) a new value resolved - * from the function callback for the provided key. - * - * The function callback receives as argument the old store element value (if exists). - * If there is no old store element, the argument will be the T zero value. - * - * Example: - * - * ``` - * s := store.New[string, int](nil) - * s.SetFunc("count", func(old int) int { - * return old + 1 - * }) - * ``` - */ - setFunc(key: K, fn: (old: T) => T): void - } - interface Store { - /** - * GetOrSet retrieves a single existing value for the provided key - * or stores a new one if it doesn't exist. - */ - getOrSet(key: K, setFunc: () => T): T - } - interface Store { - /** - * SetIfLessThanLimit sets (or overwrite if already exist) a new value for key. - * - * This method is similar to Set() but **it will skip adding new elements** - * to the store if the store length has reached the specified limit. - * false is returned if maxAllowedElements limit is reached. - */ - setIfLessThanLimit(key: K, value: T, maxAllowedElements: number): boolean - } - interface Store { - /** - * UnmarshalJSON implements [json.Unmarshaler] and imports the - * provided JSON data into the store. - * - * The store entries that match with the ones from the data will be overwritten with the new value. - */ - unmarshalJSON(data: string|Array): void - } - interface Store { - /** - * MarshalJSON implements [json.Marshaler] and export the current - * store data into valid JSON. - */ - marshalJSON(): string|Array - } -} - -namespace hook { - /** - * Event implements [Resolver] and it is intended to be used as a base - * Hook event that you can embed in your custom typed event structs. - * - * Example: - * - * ``` - * type CustomEvent struct { - * hook.Event - * - * SomeField int - * } - * ``` - */ - interface Event { - } - interface Event { - /** - * Next calls the next hook handler. - */ - next(): void - } - /** - * Handler defines a single Hook handler. - * Multiple handlers can share the same id. - * If Id is not explicitly set it will be autogenerated by Hook.Add and Hook.AddHandler. - */ - interface Handler { - /** - * Func defines the handler function to execute. - * - * Note that users need to call e.Next() in order to proceed with - * the execution of the hook chain. - */ - func: (_arg0: T) => void - /** - * Id is the unique identifier of the handler. - * - * It could be used later to remove the handler from a hook via [Hook.Remove]. - * - * If missing, an autogenerated value will be assigned when adding - * the handler to a hook. - */ - id: string - /** - * Priority allows changing the default exec priority of the handler within a hook. - * - * If 0, the handler will be executed in the same order it was registered. - */ - priority: number - } - /** - * Hook defines a generic concurrent safe structure for managing event hooks. - * - * When using custom event it must embed the base [hook.Event]. - * - * Example: - * - * ``` - * type CustomEvent struct { - * hook.Event - * SomeField int - * } - * - * h := Hook[*CustomEvent]{} - * - * h.BindFunc(func(e *CustomEvent) error { - * println(e.SomeField) - * - * return e.Next() - * }) - * - * h.Trigger(&CustomEvent{ SomeField: 123 }) - * ``` - */ - interface Hook { - } - /** - * TaggedHook defines a proxy hook which register handlers that are triggered only - * if the TaggedHook.tags are empty or includes at least one of the event data tag(s). - */ - type _scdfaVk = mainHook - interface TaggedHook extends _scdfaVk { - } -} - -namespace search { - /** - * Result defines the returned search result structure. - */ - interface Result { - items: any - page: number - perPage: number - totalItems: number - totalPages: number - } - /** - * ResolverResult defines a single FieldResolver.Resolve() successfully parsed result. - */ - interface ResolverResult { - /** - * Identifier is the plain SQL identifier/column that will be used - * in the final db expression as left or right operand. - */ - identifier: string - /** - * NoCoalesce instructs to not use COALESCE or NULL fallbacks - * when building the identifier expression. - */ - noCoalesce: boolean - /** - * Params is a map with db placeholder->value pairs that will be added - * to the query when building both resolved operands/sides in a single expression. - */ - params: dbx.Params - /** - * MultiMatchSubQuery is an optional sub query expression that will be added - * in addition to the combined ResolverResult expression during build. - */ - multiMatchSubQuery: dbx.Expression - /** - * AfterBuild is an optional function that will be called after building - * and combining the result of both resolved operands/sides in a single expression. - */ - afterBuild: (expr: dbx.Expression) => dbx.Expression - } -} - -namespace router { - // @ts-ignore - import validation = ozzo_validation - /** - * ApiError defines the struct for a basic api error response. - */ - interface ApiError { - data: _TygojaDict - message: string - status: number - } - interface ApiError { - /** - * Error makes it compatible with the `error` interface. - */ - error(): string - } - interface ApiError { - /** - * RawData returns the unformatted error data (could be an internal error, text, etc.) - */ - rawData(): any - } - interface ApiError { - /** - * Is reports whether the current ApiError wraps the target. - */ - is(target: Error): boolean - } - /** - * Event specifies based Route handler event that is usually intended - * to be embedded as part of a custom event struct. - * - * NB! It is expected that the Response and Request fields are always set. - */ - type _szjJyId = hook.Event - interface Event extends _szjJyId { - response: http.ResponseWriter - request?: http.Request - } - interface Event { - /** - * Written reports whether the current response has already been written. - * - * This method always returns false if e.ResponseWritter doesn't implement the WriteTracker interface - * (all router package handlers receives a ResponseWritter that implements it unless explicitly replaced with a custom one). - */ - written(): boolean - } - interface Event { - /** - * Status reports the status code of the current response. - * - * This method always returns 0 if e.Response doesn't implement the StatusTracker interface - * (all router package handlers receives a ResponseWritter that implements it unless explicitly replaced with a custom one). - */ - status(): number - } - interface Event { - /** - * Flush flushes buffered data to the current response. - * - * Returns [http.ErrNotSupported] if e.Response doesn't implement the [http.Flusher] interface - * (all router package handlers receives a ResponseWritter that implements it unless explicitly replaced with a custom one). - */ - flush(): void - } - interface Event { - /** - * IsTLS reports whether the connection on which the request was received is TLS. - */ - isTLS(): boolean - } - interface Event { - /** - * SetCookie is an alias for [http.SetCookie]. - * - * SetCookie adds a Set-Cookie header to the current response's headers. - * The provided cookie must have a valid Name. - * Invalid cookies may be silently dropped. - */ - setCookie(cookie: http.Cookie): void - } - interface Event { - /** - * RemoteIP returns the IP address of the client that sent the request. - * - * IPv6 addresses are returned expanded. - * For example, "2001:db8::1" becomes "2001:0db8:0000:0000:0000:0000:0000:0001". - * - * Note that if you are behind reverse proxy(ies), this method returns - * the IP of the last connecting proxy. - */ - remoteIP(): string - } - interface Event { - /** - * FindUploadedFiles extracts all form files of "key" from a http request - * and returns a slice with filesystem.File instances (if any). - */ - findUploadedFiles(key: string): Array<(filesystem.File | undefined)> - } - interface Event { - /** - * Get retrieves single value from the current event data store. - */ - get(key: string): any - } - interface Event { - /** - * GetAll returns a copy of the current event data store. - */ - getAll(): _TygojaDict - } - interface Event { - /** - * Set saves single value into the current event data store. - */ - set(key: string, value: any): void - } - interface Event { - /** - * SetAll saves all items from m into the current event data store. - */ - setAll(m: _TygojaDict): void - } - interface Event { - /** - * String writes a plain string response. - */ - string(status: number, data: string): void - } - interface Event { - /** - * HTML writes an HTML response. - */ - html(status: number, data: string): void - } - interface Event { - /** - * JSON writes a JSON response. - * - * It also provides a generic response data fields picker if the "fields" query parameter is set. - * For example, if you are requesting `?fields=a,b` for `e.JSON(200, map[string]int{ "a":1, "b":2, "c":3 })`, - * it should result in a JSON response like: `{"a":1, "b": 2}`. - */ - json(status: number, data: any): void - } - interface Event { - /** - * XML writes an XML response. - * It automatically prepends the generic [xml.Header] string to the response. - */ - xml(status: number, data: any): void - } - interface Event { - /** - * Stream streams the specified reader into the response. - */ - stream(status: number, contentType: string, reader: io.Reader): void - } - interface Event { - /** - * Blob writes a blob (bytes slice) response. - */ - blob(status: number, contentType: string, b: string|Array): void - } - interface Event { - /** - * FileFS serves the specified filename from fsys. - * - * It is similar to [echo.FileFS] for consistency with earlier versions. - */ - fileFS(fsys: fs.FS, filename: string): void - } - interface Event { - /** - * NoContent writes a response with no body (ex. 204). - */ - noContent(status: number): void - } - interface Event { - /** - * Redirect writes a redirect response to the specified url. - * The status code must be in between 300 – 399 range. - */ - redirect(status: number, url: string): void - } - interface Event { - error(status: number, message: string, errData: any): (ApiError) - } - interface Event { - badRequestError(message: string, errData: any): (ApiError) - } - interface Event { - notFoundError(message: string, errData: any): (ApiError) - } - interface Event { - forbiddenError(message: string, errData: any): (ApiError) - } - interface Event { - unauthorizedError(message: string, errData: any): (ApiError) - } - interface Event { - tooManyRequestsError(message: string, errData: any): (ApiError) - } - interface Event { - internalServerError(message: string, errData: any): (ApiError) - } - interface Event { - /** - * BindBody unmarshal the request body into the provided dst. - * - * dst must be either a struct pointer or map[string]any. - * - * The rules how the body will be scanned depends on the request Content-Type. - * - * Currently the following Content-Types are supported: - * ``` - * - application/json - * - text/xml, application/xml - * - multipart/form-data, application/x-www-form-urlencoded - * ``` - * - * Respectively the following struct tags are supported (again, which one will be used depends on the Content-Type): - * ``` - * - "json" (json body)- uses the builtin Go json package for unmarshaling. - * - "xml" (xml body) - uses the builtin Go xml package for unmarshaling. - * - "form" (form data) - utilizes the custom [router.UnmarshalRequestData] method. - * ``` - * - * NB! When dst is a struct make sure that it doesn't have public fields - * that shouldn't be bindable and it is advisible such fields to be unexported - * or have a separate struct just for the binding. For example: - * - * ``` - * data := struct{ - * somethingPrivate string - * - * Title string `json:"title" form:"title"` - * Total int `json:"total" form:"total"` - * } - * err := e.BindBody(&data) - * ``` - */ - bindBody(dst: any): void - } - /** - * Router defines a thin wrapper around the standard Go [http.ServeMux] by - * adding support for routing sub-groups, middlewares and other common utils. - * - * Example: - * - * ``` - * r := NewRouter[*MyEvent](eventFactory) - * - * // middlewares - * r.BindFunc(m1, m2) - * - * // routes - * r.GET("/test", handler1) - * - * // sub-routers/groups - * api := r.Group("/api") - * api.GET("/admins", handler2) - * - * // generate a http.ServeMux instance based on the router configurations - * mux, _ := r.BuildMux() - * - * http.ListenAndServe("localhost:8090", mux) - * ``` - */ - type _sKVIMBC = RouterGroup - interface Router extends _sKVIMBC { - } -} - -namespace mailer { - /** - * Message defines a generic email message struct. - */ - interface Message { - from: { address: string; name?: string; } - to: Array<{ address: string; name?: string; }> - bcc: Array<{ address: string; name?: string; }> - cc: Array<{ address: string; name?: string; }> - subject: string - html: string - text: string - headers: _TygojaDict - attachments: _TygojaDict - inlineAttachments: _TygojaDict - } - /** - * Mailer defines a base mail client interface. - */ - interface Mailer { - [key:string]: any; - /** - * Send sends an email with the provided Message. - */ - send(message: Message): void - } -} - namespace subscriptions { /** * Broker defines a struct for managing subscriptions clients. @@ -21057,6 +21057,15 @@ namespace sync { } } +namespace io { + /** + * WriteCloser is the interface that groups the basic Write and Close methods. + */ + interface WriteCloser { + [key:string]: any; + } +} + namespace syscall { /** * SysProcIDMap holds Container ID to Host ID mappings used for User Namespaces in Linux. @@ -21098,13 +21107,532 @@ namespace syscall { } } -namespace io { +namespace time { /** - * WriteCloser is the interface that groups the basic Write and Close methods. + * A Month specifies a month of the year (January = 1, ...). */ - interface WriteCloser { - [key:string]: any; + interface Month extends Number{} + interface Month { + /** + * String returns the English name of the month ("January", "February", ...). + */ + string(): string } + /** + * A Weekday specifies a day of the week (Sunday = 0, ...). + */ + interface Weekday extends Number{} + interface Weekday { + /** + * String returns the English name of the day ("Sunday", "Monday", ...). + */ + string(): string + } + /** + * A Location maps time instants to the zone in use at that time. + * Typically, the Location represents the collection of time offsets + * in use in a geographical area. For many Locations the time offset varies + * depending on whether daylight savings time is in use at the time instant. + * + * Location is used to provide a time zone in a printed Time value and for + * calculations involving intervals that may cross daylight savings time + * boundaries. + */ + interface Location { + } + interface Location { + /** + * String returns a descriptive name for the time zone information, + * corresponding to the name argument to [LoadLocation] or [FixedZone]. + */ + string(): string + } +} + +namespace context { +} + +namespace fs { +} + +namespace sql { + /** + * IsolationLevel is the transaction isolation level used in [TxOptions]. + */ + interface IsolationLevel extends Number{} + interface IsolationLevel { + /** + * String returns the name of the transaction isolation level. + */ + string(): string + } + /** + * DBStats contains database statistics. + */ + interface DBStats { + maxOpenConnections: number // Maximum number of open connections to the database. + /** + * Pool Status + */ + openConnections: number // The number of established connections both in use and idle. + inUse: number // The number of connections currently in use. + idle: number // The number of idle connections. + /** + * Counters + */ + waitCount: number // The total number of connections waited for. + waitDuration: time.Duration // The total time blocked waiting for a new connection. + maxIdleClosed: number // The total number of connections closed due to SetMaxIdleConns. + maxIdleTimeClosed: number // The total number of connections closed due to SetConnMaxIdleTime. + maxLifetimeClosed: number // The total number of connections closed due to SetConnMaxLifetime. + } + /** + * Conn represents a single database connection rather than a pool of database + * connections. Prefer running queries from [DB] unless there is a specific + * need for a continuous single database connection. + * + * A Conn must call [Conn.Close] to return the connection to the database pool + * and may do so concurrently with a running query. + * + * After a call to [Conn.Close], all operations on the + * connection fail with [ErrConnDone]. + */ + interface Conn { + } + interface Conn { + /** + * PingContext verifies the connection to the database is still alive. + */ + pingContext(ctx: context.Context): void + } + interface Conn { + /** + * ExecContext executes a query without returning any rows. + * The args are for any placeholder parameters in the query. + */ + execContext(ctx: context.Context, query: string, ...args: any[]): Result + } + interface Conn { + /** + * QueryContext executes a query that returns rows, typically a SELECT. + * The args are for any placeholder parameters in the query. + */ + queryContext(ctx: context.Context, query: string, ...args: any[]): (Rows) + } + interface Conn { + /** + * QueryRowContext executes a query that is expected to return at most one row. + * QueryRowContext always returns a non-nil value. Errors are deferred until + * the [*Row.Scan] method is called. + * If the query selects no rows, the [*Row.Scan] will return [ErrNoRows]. + * Otherwise, the [*Row.Scan] scans the first selected row and discards + * the rest. + */ + queryRowContext(ctx: context.Context, query: string, ...args: any[]): (Row) + } + interface Conn { + /** + * PrepareContext creates a prepared statement for later queries or executions. + * Multiple queries or executions may be run concurrently from the + * returned statement. + * The caller must call the statement's [*Stmt.Close] method + * when the statement is no longer needed. + * + * The provided context is used for the preparation of the statement, not for the + * execution of the statement. + */ + prepareContext(ctx: context.Context, query: string): (Stmt) + } + interface Conn { + /** + * Raw executes f exposing the underlying driver connection for the + * duration of f. The driverConn must not be used outside of f. + * + * Once f returns and err is not [driver.ErrBadConn], the [Conn] will continue to be usable + * until [Conn.Close] is called. + */ + raw(f: (driverConn: any) => void): void + } + interface Conn { + /** + * BeginTx starts a transaction. + * + * The provided context is used until the transaction is committed or rolled back. + * If the context is canceled, the sql package will roll back + * the transaction. [Tx.Commit] will return an error if the context provided to + * BeginTx is canceled. + * + * The provided [TxOptions] is optional and may be nil if defaults should be used. + * If a non-default isolation level is used that the driver doesn't support, + * an error will be returned. + */ + beginTx(ctx: context.Context, opts: TxOptions): (Tx) + } + interface Conn { + /** + * Close returns the connection to the connection pool. + * All operations after a Close will return with [ErrConnDone]. + * Close is safe to call concurrently with other operations and will + * block until all other operations finish. It may be useful to first + * cancel any used context and then call close directly after. + */ + close(): void + } + /** + * ColumnType contains the name and type of a column. + */ + interface ColumnType { + } + interface ColumnType { + /** + * Name returns the name or alias of the column. + */ + name(): string + } + interface ColumnType { + /** + * Length returns the column type length for variable length column types such + * as text and binary field types. If the type length is unbounded the value will + * be [math.MaxInt64] (any database limits will still apply). + * If the column type is not variable length, such as an int, or if not supported + * by the driver ok is false. + */ + length(): [number, boolean] + } + interface ColumnType { + /** + * DecimalSize returns the scale and precision of a decimal type. + * If not applicable or if not supported ok is false. + */ + decimalSize(): [number, number, boolean] + } + interface ColumnType { + /** + * ScanType returns a Go type suitable for scanning into using [Rows.Scan]. + * If a driver does not support this property ScanType will return + * the type of an empty interface. + */ + scanType(): any + } + interface ColumnType { + /** + * Nullable reports whether the column may be null. + * If a driver does not support this property ok will be false. + */ + nullable(): [boolean, boolean] + } + interface ColumnType { + /** + * DatabaseTypeName returns the database system name of the column type. If an empty + * string is returned, then the driver type name is not supported. + * Consult your driver documentation for a list of driver data types. [ColumnType.Length] specifiers + * are not included. + * Common type names include "VARCHAR", "TEXT", "NVARCHAR", "DECIMAL", "BOOL", + * "INT", and "BIGINT". + */ + databaseTypeName(): string + } + /** + * Row is the result of calling [DB.QueryRow] to select a single row. + */ + interface Row { + } + interface Row { + /** + * Scan copies the columns from the matched row into the values + * pointed at by dest. See the documentation on [Rows.Scan] for details. + * If more than one row matches the query, + * Scan uses the first row and discards the rest. If no row matches + * the query, Scan returns [ErrNoRows]. + */ + scan(...dest: any[]): void + } + interface Row { + /** + * Err provides a way for wrapping packages to check for + * query errors without calling [Row.Scan]. + * Err returns the error, if any, that was encountered while running the query. + * If this error is not nil, this error will also be returned from [Row.Scan]. + */ + err(): void + } +} + +namespace net { + /** + * Addr represents a network end point address. + * + * The two methods [Addr.Network] and [Addr.String] conventionally return strings + * that can be passed as the arguments to [Dial], but the exact form + * and meaning of the strings is up to the implementation. + */ + interface Addr { + [key:string]: any; + network(): string // name of the network (for example, "tcp", "udp") + string(): string // string form of address (for example, "192.0.2.1:25", "[2001:db8::1]:80") + } + /** + * A Listener is a generic network listener for stream-oriented protocols. + * + * Multiple goroutines may invoke methods on a Listener simultaneously. + */ + interface Listener { + [key:string]: any; + /** + * Accept waits for and returns the next connection to the listener. + */ + accept(): Conn + /** + * Close closes the listener. + * Any blocked Accept operations will be unblocked and return errors. + */ + close(): void + /** + * Addr returns the listener's network address. + */ + addr(): Addr + } +} + +/** + * Package url parses URLs and implements query escaping. + */ +namespace url { + /** + * A URL represents a parsed URL (technically, a URI reference). + * + * The general form represented is: + * + * ``` + * [scheme:][//[userinfo@]host][/]path[?query][#fragment] + * ``` + * + * URLs that do not start with a slash after the scheme are interpreted as: + * + * ``` + * scheme:opaque[?query][#fragment] + * ``` + * + * The Host field contains the host and port subcomponents of the URL. + * When the port is present, it is separated from the host with a colon. + * When the host is an IPv6 address, it must be enclosed in square brackets: + * "[fe80::1]:80". The [net.JoinHostPort] function combines a host and port + * into a string suitable for the Host field, adding square brackets to + * the host when necessary. + * + * Note that the Path field is stored in decoded form: /%47%6f%2f becomes /Go/. + * A consequence is that it is impossible to tell which slashes in the Path were + * slashes in the raw URL and which were %2f. This distinction is rarely important, + * but when it is, the code should use the [URL.EscapedPath] method, which preserves + * the original encoding of Path. + * + * The RawPath field is an optional field which is only set when the default + * encoding of Path is different from the escaped path. See the EscapedPath method + * for more details. + * + * URL's String method uses the EscapedPath method to obtain the path. + */ + interface URL { + scheme: string + opaque: string // encoded opaque data + user?: Userinfo // username and password information + host: string // host or host:port (see Hostname and Port methods) + path: string // path (relative paths may omit leading slash) + rawPath: string // encoded path hint (see EscapedPath method) + omitHost: boolean // do not emit empty host (authority) + forceQuery: boolean // append a query ('?') even if RawQuery is empty + rawQuery: string // encoded query values, without '?' + fragment: string // fragment for references, without '#' + rawFragment: string // encoded fragment hint (see EscapedFragment method) + } + interface URL { + /** + * EscapedPath returns the escaped form of u.Path. + * In general there are multiple possible escaped forms of any path. + * EscapedPath returns u.RawPath when it is a valid escaping of u.Path. + * Otherwise EscapedPath ignores u.RawPath and computes an escaped + * form on its own. + * The [URL.String] and [URL.RequestURI] methods use EscapedPath to construct + * their results. + * In general, code should call EscapedPath instead of + * reading u.RawPath directly. + */ + escapedPath(): string + } + interface URL { + /** + * EscapedFragment returns the escaped form of u.Fragment. + * In general there are multiple possible escaped forms of any fragment. + * EscapedFragment returns u.RawFragment when it is a valid escaping of u.Fragment. + * Otherwise EscapedFragment ignores u.RawFragment and computes an escaped + * form on its own. + * The [URL.String] method uses EscapedFragment to construct its result. + * In general, code should call EscapedFragment instead of + * reading u.RawFragment directly. + */ + escapedFragment(): string + } + interface URL { + /** + * String reassembles the [URL] into a valid URL string. + * The general form of the result is one of: + * + * ``` + * scheme:opaque?query#fragment + * scheme://userinfo@host/path?query#fragment + * ``` + * + * If u.Opaque is non-empty, String uses the first form; + * otherwise it uses the second form. + * Any non-ASCII characters in host are escaped. + * To obtain the path, String uses u.EscapedPath(). + * + * In the second form, the following rules apply: + * ``` + * - if u.Scheme is empty, scheme: is omitted. + * - if u.User is nil, userinfo@ is omitted. + * - if u.Host is empty, host/ is omitted. + * - if u.Scheme and u.Host are empty and u.User is nil, + * the entire scheme://userinfo@host/ is omitted. + * - if u.Host is non-empty and u.Path begins with a /, + * the form host/path does not add its own /. + * - if u.RawQuery is empty, ?query is omitted. + * - if u.Fragment is empty, #fragment is omitted. + * ``` + */ + string(): string + } + interface URL { + /** + * Redacted is like [URL.String] but replaces any password with "xxxxx". + * Only the password in u.User is redacted. + */ + redacted(): string + } + /** + * Values maps a string key to a list of values. + * It is typically used for query parameters and form values. + * Unlike in the http.Header map, the keys in a Values map + * are case-sensitive. + */ + interface Values extends _TygojaDict{} + interface Values { + /** + * Get gets the first value associated with the given key. + * If there are no values associated with the key, Get returns + * the empty string. To access multiple values, use the map + * directly. + */ + get(key: string): string + } + interface Values { + /** + * Set sets the key to value. It replaces any existing + * values. + */ + set(key: string, value: string): void + } + interface Values { + /** + * Add adds the value to key. It appends to any existing + * values associated with key. + */ + add(key: string, value: string): void + } + interface Values { + /** + * Del deletes the values associated with key. + */ + del(key: string): void + } + interface Values { + /** + * Has checks whether a given key is set. + */ + has(key: string): boolean + } + interface Values { + /** + * Encode encodes the values into “URL encoded” form + * ("bar=baz&foo=quux") sorted by key. + */ + encode(): string + } + interface URL { + /** + * IsAbs reports whether the [URL] is absolute. + * Absolute means that it has a non-empty scheme. + */ + isAbs(): boolean + } + interface URL { + /** + * Parse parses a [URL] in the context of the receiver. The provided URL + * may be relative or absolute. Parse returns nil, err on parse + * failure, otherwise its return value is the same as [URL.ResolveReference]. + */ + parse(ref: string): (URL) + } + interface URL { + /** + * ResolveReference resolves a URI reference to an absolute URI from + * an absolute base URI u, per RFC 3986 Section 5.2. The URI reference + * may be relative or absolute. ResolveReference always returns a new + * [URL] instance, even if the returned URL is identical to either the + * base or reference. If ref is an absolute URL, then ResolveReference + * ignores base and returns a copy of ref. + */ + resolveReference(ref: URL): (URL) + } + interface URL { + /** + * Query parses RawQuery and returns the corresponding values. + * It silently discards malformed value pairs. + * To check errors use [ParseQuery]. + */ + query(): Values + } + interface URL { + /** + * RequestURI returns the encoded path?query or opaque?query + * string that would be used in an HTTP request for u. + */ + requestURI(): string + } + interface URL { + /** + * Hostname returns u.Host, stripping any valid port number if present. + * + * If the result is enclosed in square brackets, as literal IPv6 addresses are, + * the square brackets are removed from the result. + */ + hostname(): string + } + interface URL { + /** + * Port returns the port part of u.Host, without the leading colon. + * + * If u.Host doesn't contain a valid numeric port, Port returns an empty string. + */ + port(): string + } + interface URL { + marshalBinary(): string|Array + } + interface URL { + unmarshalBinary(text: string|Array): void + } + interface URL { + /** + * JoinPath returns a new [URL] with the provided path elements joined to + * any existing path and the resulting path cleaned of any ./ or ../ elements. + * Any sequences of multiple / characters will be reduced to a single /. + */ + joinPath(...elem: string[]): (URL) + } +} + +namespace types { } namespace bufio { @@ -21367,90 +21895,6 @@ namespace bufio { } } -namespace time { - /** - * A Month specifies a month of the year (January = 1, ...). - */ - interface Month extends Number{} - interface Month { - /** - * String returns the English name of the month ("January", "February", ...). - */ - string(): string - } - /** - * A Weekday specifies a day of the week (Sunday = 0, ...). - */ - interface Weekday extends Number{} - interface Weekday { - /** - * String returns the English name of the day ("Sunday", "Monday", ...). - */ - string(): string - } - /** - * A Location maps time instants to the zone in use at that time. - * Typically, the Location represents the collection of time offsets - * in use in a geographical area. For many Locations the time offset varies - * depending on whether daylight savings time is in use at the time instant. - * - * Location is used to provide a time zone in a printed Time value and for - * calculations involving intervals that may cross daylight savings time - * boundaries. - */ - interface Location { - } - interface Location { - /** - * String returns a descriptive name for the time zone information, - * corresponding to the name argument to [LoadLocation] or [FixedZone]. - */ - string(): string - } -} - -namespace fs { -} - -namespace context { -} - -namespace net { - /** - * Addr represents a network end point address. - * - * The two methods [Addr.Network] and [Addr.String] conventionally return strings - * that can be passed as the arguments to [Dial], but the exact form - * and meaning of the strings is up to the implementation. - */ - interface Addr { - [key:string]: any; - network(): string // name of the network (for example, "tcp", "udp") - string(): string // string form of address (for example, "192.0.2.1:25", "[2001:db8::1]:80") - } - /** - * A Listener is a generic network listener for stream-oriented protocols. - * - * Multiple goroutines may invoke methods on a Listener simultaneously. - */ - interface Listener { - [key:string]: any; - /** - * Accept waits for and returns the next connection to the listener. - */ - accept(): Conn - /** - * Close closes the listener. - * Any blocked Accept operations will be unblocked and return errors. - */ - close(): void - /** - * Addr returns the listener's network address. - */ - addr(): Addr - } -} - /** * Package textproto implements generic support for text-based request/response * protocols in the style of HTTP, NNTP, and SMTP. @@ -21590,244 +22034,6 @@ namespace multipart { } } -/** - * Package url parses URLs and implements query escaping. - */ -namespace url { - /** - * A URL represents a parsed URL (technically, a URI reference). - * - * The general form represented is: - * - * ``` - * [scheme:][//[userinfo@]host][/]path[?query][#fragment] - * ``` - * - * URLs that do not start with a slash after the scheme are interpreted as: - * - * ``` - * scheme:opaque[?query][#fragment] - * ``` - * - * The Host field contains the host and port subcomponents of the URL. - * When the port is present, it is separated from the host with a colon. - * When the host is an IPv6 address, it must be enclosed in square brackets: - * "[fe80::1]:80". The [net.JoinHostPort] function combines a host and port - * into a string suitable for the Host field, adding square brackets to - * the host when necessary. - * - * Note that the Path field is stored in decoded form: /%47%6f%2f becomes /Go/. - * A consequence is that it is impossible to tell which slashes in the Path were - * slashes in the raw URL and which were %2f. This distinction is rarely important, - * but when it is, the code should use the [URL.EscapedPath] method, which preserves - * the original encoding of Path. - * - * The RawPath field is an optional field which is only set when the default - * encoding of Path is different from the escaped path. See the EscapedPath method - * for more details. - * - * URL's String method uses the EscapedPath method to obtain the path. - */ - interface URL { - scheme: string - opaque: string // encoded opaque data - user?: Userinfo // username and password information - host: string // host or host:port (see Hostname and Port methods) - path: string // path (relative paths may omit leading slash) - rawPath: string // encoded path hint (see EscapedPath method) - omitHost: boolean // do not emit empty host (authority) - forceQuery: boolean // append a query ('?') even if RawQuery is empty - rawQuery: string // encoded query values, without '?' - fragment: string // fragment for references, without '#' - rawFragment: string // encoded fragment hint (see EscapedFragment method) - } - interface URL { - /** - * EscapedPath returns the escaped form of u.Path. - * In general there are multiple possible escaped forms of any path. - * EscapedPath returns u.RawPath when it is a valid escaping of u.Path. - * Otherwise EscapedPath ignores u.RawPath and computes an escaped - * form on its own. - * The [URL.String] and [URL.RequestURI] methods use EscapedPath to construct - * their results. - * In general, code should call EscapedPath instead of - * reading u.RawPath directly. - */ - escapedPath(): string - } - interface URL { - /** - * EscapedFragment returns the escaped form of u.Fragment. - * In general there are multiple possible escaped forms of any fragment. - * EscapedFragment returns u.RawFragment when it is a valid escaping of u.Fragment. - * Otherwise EscapedFragment ignores u.RawFragment and computes an escaped - * form on its own. - * The [URL.String] method uses EscapedFragment to construct its result. - * In general, code should call EscapedFragment instead of - * reading u.RawFragment directly. - */ - escapedFragment(): string - } - interface URL { - /** - * String reassembles the [URL] into a valid URL string. - * The general form of the result is one of: - * - * ``` - * scheme:opaque?query#fragment - * scheme://userinfo@host/path?query#fragment - * ``` - * - * If u.Opaque is non-empty, String uses the first form; - * otherwise it uses the second form. - * Any non-ASCII characters in host are escaped. - * To obtain the path, String uses u.EscapedPath(). - * - * In the second form, the following rules apply: - * ``` - * - if u.Scheme is empty, scheme: is omitted. - * - if u.User is nil, userinfo@ is omitted. - * - if u.Host is empty, host/ is omitted. - * - if u.Scheme and u.Host are empty and u.User is nil, - * the entire scheme://userinfo@host/ is omitted. - * - if u.Host is non-empty and u.Path begins with a /, - * the form host/path does not add its own /. - * - if u.RawQuery is empty, ?query is omitted. - * - if u.Fragment is empty, #fragment is omitted. - * ``` - */ - string(): string - } - interface URL { - /** - * Redacted is like [URL.String] but replaces any password with "xxxxx". - * Only the password in u.User is redacted. - */ - redacted(): string - } - /** - * Values maps a string key to a list of values. - * It is typically used for query parameters and form values. - * Unlike in the http.Header map, the keys in a Values map - * are case-sensitive. - */ - interface Values extends _TygojaDict{} - interface Values { - /** - * Get gets the first value associated with the given key. - * If there are no values associated with the key, Get returns - * the empty string. To access multiple values, use the map - * directly. - */ - get(key: string): string - } - interface Values { - /** - * Set sets the key to value. It replaces any existing - * values. - */ - set(key: string, value: string): void - } - interface Values { - /** - * Add adds the value to key. It appends to any existing - * values associated with key. - */ - add(key: string, value: string): void - } - interface Values { - /** - * Del deletes the values associated with key. - */ - del(key: string): void - } - interface Values { - /** - * Has checks whether a given key is set. - */ - has(key: string): boolean - } - interface Values { - /** - * Encode encodes the values into “URL encoded” form - * ("bar=baz&foo=quux") sorted by key. - */ - encode(): string - } - interface URL { - /** - * IsAbs reports whether the [URL] is absolute. - * Absolute means that it has a non-empty scheme. - */ - isAbs(): boolean - } - interface URL { - /** - * Parse parses a [URL] in the context of the receiver. The provided URL - * may be relative or absolute. Parse returns nil, err on parse - * failure, otherwise its return value is the same as [URL.ResolveReference]. - */ - parse(ref: string): (URL) - } - interface URL { - /** - * ResolveReference resolves a URI reference to an absolute URI from - * an absolute base URI u, per RFC 3986 Section 5.2. The URI reference - * may be relative or absolute. ResolveReference always returns a new - * [URL] instance, even if the returned URL is identical to either the - * base or reference. If ref is an absolute URL, then ResolveReference - * ignores base and returns a copy of ref. - */ - resolveReference(ref: URL): (URL) - } - interface URL { - /** - * Query parses RawQuery and returns the corresponding values. - * It silently discards malformed value pairs. - * To check errors use [ParseQuery]. - */ - query(): Values - } - interface URL { - /** - * RequestURI returns the encoded path?query or opaque?query - * string that would be used in an HTTP request for u. - */ - requestURI(): string - } - interface URL { - /** - * Hostname returns u.Host, stripping any valid port number if present. - * - * If the result is enclosed in square brackets, as literal IPv6 addresses are, - * the square brackets are removed from the result. - */ - hostname(): string - } - interface URL { - /** - * Port returns the port part of u.Host, without the leading colon. - * - * If u.Host doesn't contain a valid numeric port, Port returns an empty string. - */ - port(): string - } - interface URL { - marshalBinary(): string|Array - } - interface URL { - unmarshalBinary(text: string|Array): void - } - interface URL { - /** - * JoinPath returns a new [URL] with the provided path elements joined to - * any existing path and the resulting path cleaned of any ./ or ../ elements. - * Any sequences of multiple / characters will be reduced to a single /. - */ - joinPath(...elem: string[]): (URL) - } -} - namespace http { /** * A Cookie represents an HTTP cookie as sent in the Set-Cookie header of an @@ -22212,372 +22418,6 @@ namespace oauth2 { } } -namespace types { -} - -namespace sql { - /** - * IsolationLevel is the transaction isolation level used in [TxOptions]. - */ - interface IsolationLevel extends Number{} - interface IsolationLevel { - /** - * String returns the name of the transaction isolation level. - */ - string(): string - } - /** - * DBStats contains database statistics. - */ - interface DBStats { - maxOpenConnections: number // Maximum number of open connections to the database. - /** - * Pool Status - */ - openConnections: number // The number of established connections both in use and idle. - inUse: number // The number of connections currently in use. - idle: number // The number of idle connections. - /** - * Counters - */ - waitCount: number // The total number of connections waited for. - waitDuration: time.Duration // The total time blocked waiting for a new connection. - maxIdleClosed: number // The total number of connections closed due to SetMaxIdleConns. - maxIdleTimeClosed: number // The total number of connections closed due to SetConnMaxIdleTime. - maxLifetimeClosed: number // The total number of connections closed due to SetConnMaxLifetime. - } - /** - * Conn represents a single database connection rather than a pool of database - * connections. Prefer running queries from [DB] unless there is a specific - * need for a continuous single database connection. - * - * A Conn must call [Conn.Close] to return the connection to the database pool - * and may do so concurrently with a running query. - * - * After a call to [Conn.Close], all operations on the - * connection fail with [ErrConnDone]. - */ - interface Conn { - } - interface Conn { - /** - * PingContext verifies the connection to the database is still alive. - */ - pingContext(ctx: context.Context): void - } - interface Conn { - /** - * ExecContext executes a query without returning any rows. - * The args are for any placeholder parameters in the query. - */ - execContext(ctx: context.Context, query: string, ...args: any[]): Result - } - interface Conn { - /** - * QueryContext executes a query that returns rows, typically a SELECT. - * The args are for any placeholder parameters in the query. - */ - queryContext(ctx: context.Context, query: string, ...args: any[]): (Rows) - } - interface Conn { - /** - * QueryRowContext executes a query that is expected to return at most one row. - * QueryRowContext always returns a non-nil value. Errors are deferred until - * the [*Row.Scan] method is called. - * If the query selects no rows, the [*Row.Scan] will return [ErrNoRows]. - * Otherwise, the [*Row.Scan] scans the first selected row and discards - * the rest. - */ - queryRowContext(ctx: context.Context, query: string, ...args: any[]): (Row) - } - interface Conn { - /** - * PrepareContext creates a prepared statement for later queries or executions. - * Multiple queries or executions may be run concurrently from the - * returned statement. - * The caller must call the statement's [*Stmt.Close] method - * when the statement is no longer needed. - * - * The provided context is used for the preparation of the statement, not for the - * execution of the statement. - */ - prepareContext(ctx: context.Context, query: string): (Stmt) - } - interface Conn { - /** - * Raw executes f exposing the underlying driver connection for the - * duration of f. The driverConn must not be used outside of f. - * - * Once f returns and err is not [driver.ErrBadConn], the [Conn] will continue to be usable - * until [Conn.Close] is called. - */ - raw(f: (driverConn: any) => void): void - } - interface Conn { - /** - * BeginTx starts a transaction. - * - * The provided context is used until the transaction is committed or rolled back. - * If the context is canceled, the sql package will roll back - * the transaction. [Tx.Commit] will return an error if the context provided to - * BeginTx is canceled. - * - * The provided [TxOptions] is optional and may be nil if defaults should be used. - * If a non-default isolation level is used that the driver doesn't support, - * an error will be returned. - */ - beginTx(ctx: context.Context, opts: TxOptions): (Tx) - } - interface Conn { - /** - * Close returns the connection to the connection pool. - * All operations after a Close will return with [ErrConnDone]. - * Close is safe to call concurrently with other operations and will - * block until all other operations finish. It may be useful to first - * cancel any used context and then call close directly after. - */ - close(): void - } - /** - * ColumnType contains the name and type of a column. - */ - interface ColumnType { - } - interface ColumnType { - /** - * Name returns the name or alias of the column. - */ - name(): string - } - interface ColumnType { - /** - * Length returns the column type length for variable length column types such - * as text and binary field types. If the type length is unbounded the value will - * be [math.MaxInt64] (any database limits will still apply). - * If the column type is not variable length, such as an int, or if not supported - * by the driver ok is false. - */ - length(): [number, boolean] - } - interface ColumnType { - /** - * DecimalSize returns the scale and precision of a decimal type. - * If not applicable or if not supported ok is false. - */ - decimalSize(): [number, number, boolean] - } - interface ColumnType { - /** - * ScanType returns a Go type suitable for scanning into using [Rows.Scan]. - * If a driver does not support this property ScanType will return - * the type of an empty interface. - */ - scanType(): any - } - interface ColumnType { - /** - * Nullable reports whether the column may be null. - * If a driver does not support this property ok will be false. - */ - nullable(): [boolean, boolean] - } - interface ColumnType { - /** - * DatabaseTypeName returns the database system name of the column type. If an empty - * string is returned, then the driver type name is not supported. - * Consult your driver documentation for a list of driver data types. [ColumnType.Length] specifiers - * are not included. - * Common type names include "VARCHAR", "TEXT", "NVARCHAR", "DECIMAL", "BOOL", - * "INT", and "BIGINT". - */ - databaseTypeName(): string - } - /** - * Row is the result of calling [DB.QueryRow] to select a single row. - */ - interface Row { - } - interface Row { - /** - * Scan copies the columns from the matched row into the values - * pointed at by dest. See the documentation on [Rows.Scan] for details. - * If more than one row matches the query, - * Scan uses the first row and discards the rest. If no row matches - * the query, Scan returns [ErrNoRows]. - */ - scan(...dest: any[]): void - } - interface Row { - /** - * Err provides a way for wrapping packages to check for - * query errors without calling [Row.Scan]. - * Err returns the error, if any, that was encountered while running the query. - * If this error is not nil, this error will also be returned from [Row.Scan]. - */ - err(): void - } -} - -namespace store { -} - -namespace jwt { - /** - * NumericDate represents a JSON numeric date value, as referenced at - * https://datatracker.ietf.org/doc/html/rfc7519#section-2. - */ - type _seQduLJ = time.Time - interface NumericDate extends _seQduLJ { - } - interface NumericDate { - /** - * MarshalJSON is an implementation of the json.RawMessage interface and serializes the UNIX epoch - * represented in NumericDate to a byte array, using the precision specified in TimePrecision. - */ - marshalJSON(): string|Array - } - interface NumericDate { - /** - * UnmarshalJSON is an implementation of the json.RawMessage interface and - * deserializes a [NumericDate] from a JSON representation, i.e. a - * [json.Number]. This number represents an UNIX epoch with either integer or - * non-integer seconds. - */ - unmarshalJSON(b: string|Array): void - } - /** - * ClaimStrings is basically just a slice of strings, but it can be either - * serialized from a string array or just a string. This type is necessary, - * since the "aud" claim can either be a single string or an array. - */ - interface ClaimStrings extends Array{} - interface ClaimStrings { - unmarshalJSON(data: string|Array): void - } - interface ClaimStrings { - marshalJSON(): string|Array - } -} - -namespace hook { - /** - * wrapped local Hook embedded struct to limit the public API surface. - */ - type _soaMlAc = Hook - interface mainHook extends _soaMlAc { - } -} - -namespace search { -} - -namespace router { - // @ts-ignore - import validation = ozzo_validation - /** - * RouterGroup represents a collection of routes and other sub groups - * that share common pattern prefix and middlewares. - */ - interface RouterGroup { - prefix: string - middlewares: Array<(hook.Handler | undefined)> - } -} - -namespace subscriptions { -} - -namespace cron { - /** - * Job defines a single registered cron job. - */ - interface Job { - } - interface Job { - /** - * Id returns the cron job id. - */ - id(): string - } - interface Job { - /** - * Expression returns the plain cron job schedule expression. - */ - expression(): string - } - interface Job { - /** - * Run runs the cron job function. - */ - run(): void - } - interface Job { - /** - * MarshalJSON implements [json.Marshaler] and export the current - * jobs data into valid JSON. - */ - marshalJSON(): string|Array - } -} - -namespace cobra { - interface PositionalArgs {(cmd: Command, args: Array): void } - // @ts-ignore - import flag = pflag - /** - * FParseErrWhitelist configures Flag parse errors to be ignored - */ - interface FParseErrWhitelist extends _TygojaAny{} - /** - * Group Structure to manage groups for commands - */ - interface Group { - id: string - title: string - } - /** - * CompletionOptions are the options to control shell completion - */ - interface CompletionOptions { - /** - * DisableDefaultCmd prevents Cobra from creating a default 'completion' command - */ - disableDefaultCmd: boolean - /** - * DisableNoDescFlag prevents Cobra from creating the '--no-descriptions' flag - * for shells that support completion descriptions - */ - disableNoDescFlag: boolean - /** - * DisableDescriptions turns off all completion descriptions for shells - * that support them - */ - disableDescriptions: boolean - /** - * HiddenDefaultCmd makes the default 'completion' command hidden - */ - hiddenDefaultCmd: boolean - } - /** - * Completion is a string that can be used for completions - * - * two formats are supported: - * ``` - * - the completion choice - * - the completion choice with a textual description (separated by a TAB). - * ``` - * - * [CompletionWithDesc] can be used to create a completion string with a textual description. - * - * Note: Go type alias is used to provide a more descriptive name in the documentation, but any string can be used. - */ - interface Completion extends String{} - /** - * CompletionFunc is a function that provides completion results. - */ - interface CompletionFunc {(cmd: Command, args: Array, toComplete: string): [Array, ShellCompDirective] } -} - namespace slog { /** * An Attr is a key-value pair. @@ -22744,6 +22584,166 @@ namespace slog { import loginternal = internal } +namespace cron { + /** + * Job defines a single registered cron job. + */ + interface Job { + } + interface Job { + /** + * Id returns the cron job id. + */ + id(): string + } + interface Job { + /** + * Expression returns the plain cron job schedule expression. + */ + expression(): string + } + interface Job { + /** + * Run runs the cron job function. + */ + run(): void + } + interface Job { + /** + * MarshalJSON implements [json.Marshaler] and export the current + * jobs data into valid JSON. + */ + marshalJSON(): string|Array + } +} + +namespace store { +} + +namespace jwt { + /** + * NumericDate represents a JSON numeric date value, as referenced at + * https://datatracker.ietf.org/doc/html/rfc7519#section-2. + */ + type _sqMtFmG = time.Time + interface NumericDate extends _sqMtFmG { + } + interface NumericDate { + /** + * MarshalJSON is an implementation of the json.RawMessage interface and serializes the UNIX epoch + * represented in NumericDate to a byte array, using the precision specified in TimePrecision. + */ + marshalJSON(): string|Array + } + interface NumericDate { + /** + * UnmarshalJSON is an implementation of the json.RawMessage interface and + * deserializes a [NumericDate] from a JSON representation, i.e. a + * [json.Number]. This number represents an UNIX epoch with either integer or + * non-integer seconds. + */ + unmarshalJSON(b: string|Array): void + } + /** + * ClaimStrings is basically just a slice of strings, but it can be either + * serialized from a string array or just a string. This type is necessary, + * since the "aud" claim can either be a single string or an array. + */ + interface ClaimStrings extends Array{} + interface ClaimStrings { + unmarshalJSON(data: string|Array): void + } + interface ClaimStrings { + marshalJSON(): string|Array + } +} + +namespace hook { + /** + * wrapped local Hook embedded struct to limit the public API surface. + */ + type _sStTiYu = Hook + interface mainHook extends _sStTiYu { + } +} + +namespace subscriptions { +} + +namespace search { +} + +namespace router { + // @ts-ignore + import validation = ozzo_validation + /** + * RouterGroup represents a collection of routes and other sub groups + * that share common pattern prefix and middlewares. + */ + interface RouterGroup { + prefix: string + middlewares: Array<(hook.Handler | undefined)> + } +} + +namespace cobra { + interface PositionalArgs {(cmd: Command, args: Array): void } + // @ts-ignore + import flag = pflag + /** + * FParseErrWhitelist configures Flag parse errors to be ignored + */ + interface FParseErrWhitelist extends _TygojaAny{} + /** + * Group Structure to manage groups for commands + */ + interface Group { + id: string + title: string + } + /** + * CompletionOptions are the options to control shell completion + */ + interface CompletionOptions { + /** + * DisableDefaultCmd prevents Cobra from creating a default 'completion' command + */ + disableDefaultCmd: boolean + /** + * DisableNoDescFlag prevents Cobra from creating the '--no-descriptions' flag + * for shells that support completion descriptions + */ + disableNoDescFlag: boolean + /** + * DisableDescriptions turns off all completion descriptions for shells + * that support them + */ + disableDescriptions: boolean + /** + * HiddenDefaultCmd makes the default 'completion' command hidden + */ + hiddenDefaultCmd: boolean + } + /** + * Completion is a string that can be used for completions + * + * two formats are supported: + * ``` + * - the completion choice + * - the completion choice with a textual description (separated by a TAB). + * ``` + * + * [CompletionWithDesc] can be used to create a completion string with a textual description. + * + * Note: Go type alias is used to provide a more descriptive name in the documentation, but any string can be used. + */ + interface Completion extends String{} + /** + * CompletionFunc is a function that provides completion results. + */ + interface CompletionFunc {(cmd: Command, args: Array, toComplete: string): [Array, ShellCompDirective] } +} + namespace multipart { /** * A Part represents a single part in a multipart body. @@ -22829,16 +22829,6 @@ namespace http { import urlpkg = url } -namespace cobra { - // @ts-ignore - import flag = pflag - /** - * ShellCompDirective is a bit map representing the different behaviors the shell - * can be instructed to have once completions have been provided. - */ - interface ShellCompDirective extends Number{} -} - namespace slog { // @ts-ignore import loginternal = internal @@ -23011,6 +23001,16 @@ namespace slog { } } +namespace cobra { + // @ts-ignore + import flag = pflag + /** + * ShellCompDirective is a bit map representing the different behaviors the shell + * can be instructed to have once completions have been provided. + */ + interface ShellCompDirective extends Number{} +} + namespace slog { // @ts-ignore import loginternal = internal diff --git a/tools/filesystem/blob/bucket.go b/tools/filesystem/blob/bucket.go index b0ac53ec..6d744f5d 100644 --- a/tools/filesystem/blob/bucket.go +++ b/tools/filesystem/blob/bucket.go @@ -699,6 +699,8 @@ func (b *Bucket) Delete(ctx context.Context, key string) (err error) { } // Close releases any resources used for the bucket. +// +// @todo Consider removing it. func (b *Bucket) Close() error { b.mu.Lock() prev := b.closed diff --git a/tools/filesystem/blob/driver.go b/tools/filesystem/blob/driver.go index fb71730f..7cae2c9b 100644 --- a/tools/filesystem/blob/driver.go +++ b/tools/filesystem/blob/driver.go @@ -40,8 +40,7 @@ type Driver interface { NormalizeError(err error) error // Attributes returns attributes for the blob. If the specified object does - // not exist, Attributes must return an error for which ErrorCode returns - // gcerrors.NotFound. + // not exist, Attributes must return an error for which ErrorCode returns ErrNotFound. // The portable type will not modify the returned Attributes. Attributes(ctx context.Context, key string) (*Attributes, error) @@ -57,8 +56,7 @@ type Driver interface { // NewRangeReader returns a Reader that reads part of an object, reading at // most length bytes starting at the given offset. If length is negative, it // will read until the end of the object. If the specified object does not - // exist, NewRangeReader must return an error for which ErrorCode returns - // gcerrors.NotFound. + // exist, NewRangeReader must return an error for which ErrorCode returns ErrNotFound. // opts is guaranteed to be non-nil. // // The returned Reader *may* also implement Downloader if the underlying @@ -90,7 +88,7 @@ type Driver interface { // Copy copies the object associated with srcKey to dstKey. // // If the source object does not exist, Copy must return an error for which - // ErrorCode returns gcerrors.NotFound. + // ErrorCode returns ErrNotFound. // // If the destination object already exists, it should be overwritten. // @@ -98,8 +96,7 @@ type Driver interface { Copy(ctx context.Context, dstKey, srcKey string) error // Delete deletes the object associated with key. If the specified object does - // not exist, Delete must return an error for which ErrorCode returns - // gcerrors.NotFound. + // not exist, Delete must return an error for which ErrorCode returns ErrNotFound. Delete(ctx context.Context, key string) error // Close cleans up any resources used by the Bucket. Once Close is called,