From 6f281005b423f9b8ac4b712568f50c4cb2c2cc26 Mon Sep 17 00:00:00 2001 From: laraibkhan-lm <73219142+laraibkhan-lm@users.noreply.github.com> Date: Fri, 13 Nov 2020 15:52:43 +0500 Subject: [PATCH] Create dmi_wrapper.v --- src/main/resources/vsrc/dmi_wrapper.v | 90 +++++++++++++++++++++++++++ 1 file changed, 90 insertions(+) create mode 100644 src/main/resources/vsrc/dmi_wrapper.v diff --git a/src/main/resources/vsrc/dmi_wrapper.v b/src/main/resources/vsrc/dmi_wrapper.v new file mode 100644 index 00000000..07dd49bc --- /dev/null +++ b/src/main/resources/vsrc/dmi_wrapper.v @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: Apache-2.0 +// Copyright 2018 Western Digital Corporation or it's affiliates. +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. +//------------------------------------------------------------------------------------ +// +// Copyright Western Digital, 2018 +// Owner : Anusha Narayanamoorthy +// Description: +// Wrapper module for JTAG_TAP and DMI synchronizer +// +//------------------------------------------------------------------------------------- + +module dmi_wrapper( + + // JTAG signals + input trst_n, // JTAG reset + input tck, // JTAG clock + input tms, // Test mode select + input tdi, // Test Data Input + output tdo, // Test Data Output + output tdoEnable, // Test Data Output enable + + // Processor Signals + input core_rst_n, // Core reset + input core_clk, // Core clock + input [31:1] jtag_id, // JTAG ID + input [31:0] rd_data, // 32 bit Read data from Processor + output [31:0] reg_wr_data, // 32 bit Write data to Processor + output [6:0] reg_wr_addr, // 7 bit reg address to Processor + output reg_en, // 1 bit Read enable to Processor + output reg_wr_en, // 1 bit Write enable to Processor + output dmi_hard_reset +); + + + + + + //Wire Declaration + wire rd_en; + wire wr_en; + wire dmireset; + + + //jtag_tap instantiation + rvjtag_tap i_jtag_tap( + .trst(trst_n), // dedicated JTAG TRST (active low) pad signal or asynchronous active low power on reset + .tck(tck), // dedicated JTAG TCK pad signal + .tms(tms), // dedicated JTAG TMS pad signal + .tdi(tdi), // dedicated JTAG TDI pad signal + .tdo(tdo), // dedicated JTAG TDO pad signal + .tdoEnable(tdoEnable), // enable for TDO pad + .wr_data(reg_wr_data), // 32 bit Write data + .wr_addr(reg_wr_addr), // 7 bit Write address + .rd_en(rd_en), // 1 bit read enable + .wr_en(wr_en), // 1 bit Write enable + .rd_data(rd_data), // 32 bit Read data + .rd_status(2'b0), + .idle(3'h0), // no need to wait to sample data + .dmi_stat(2'b0), // no need to wait or error possible + .version(4'h1), // debug spec 0.13 compliant + .jtag_id(jtag_id), + .dmi_hard_reset(dmi_hard_reset), + .dmi_reset(dmireset) +); + + + // dmi_jtag_to_core_sync instantiation + dmi_jtag_to_core_sync i_dmi_jtag_to_core_sync( + .wr_en(wr_en), // 1 bit Write enable + .rd_en(rd_en), // 1 bit Read enable + + .rst_n(core_rst_n), + .clk(core_clk), + .reg_en(reg_en), // 1 bit Write interface bit + .reg_wr_en(reg_wr_en) // 1 bit Write enable + ); + +endmodule