quasar/design/target/scala-2.12/classes/vsrc/uart_defines.v

234 lines
9.9 KiB
Verilog

//////////////////////////////////////////////////////////////////////
//// ////
//// uart_defines.v ////
//// ////
//// ////
//// This file is part of the "UART 16550 compatible" project ////
//// http://www.opencores.org/cores/uart16550/ ////
//// ////
//// Documentation related to this project: ////
//// - http://www.opencores.org/cores/uart16550/ ////
//// ////
//// Projects compatibility: ////
//// - WISHBONE ////
//// RS232 Protocol ////
//// 16550D uart (mostly supported) ////
//// ////
//// Overview (main Features): ////
//// Defines of the Core ////
//// ////
//// Known problems (limits): ////
//// None ////
//// ////
//// To Do: ////
//// Nothing. ////
//// ////
//// Author(s): ////
//// - gorban@opencores.org ////
//// - Jacob Gorban ////
//// - Igor Mohor (igorm@opencores.org) ////
//// ////
//// Created: 2001/05/12 ////
//// Last Updated: 2001/05/17 ////
//// (See log for the revision history) ////
//// ////
//// ////
//////////////////////////////////////////////////////////////////////
//// ////
//// Copyright (C) 2000, 2001 Authors ////
//// ////
//// This source file may be used and distributed without ////
//// restriction provided that this copyright statement is not ////
//// removed from the file and that any derivative work contains ////
//// the original copyright notice and the associated disclaimer. ////
//// ////
//// This source file is free software; you can redistribute it ////
//// and/or modify it under the terms of the GNU Lesser General ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any ////
//// later version. ////
//// ////
//// This source is distributed in the hope that it will be ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
//// PURPOSE. See the GNU Lesser General Public License for more ////
//// details. ////
//// ////
//// You should have received a copy of the GNU Lesser General ////
//// Public License along with this source; if not, download it ////
//// from http://www.opencores.org/lgpl.shtml ////
//// ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: not supported by cvs2svn $
// Revision 1.13 2003/06/11 16:37:47 gorban
// This fixes errors in some cases when data is being read and put to the FIFO at the same time. Patch is submitted by Scott Furman. Update is very recommended.
//
// Revision 1.12 2002/07/22 23:02:23 gorban
// Bug Fixes:
// * Possible loss of sync and bad reception of stop bit on slow baud rates fixed.
// Problem reported by Kenny.Tung.
// * Bad (or lack of ) loopback handling fixed. Reported by Cherry Withers.
//
// Improvements:
// * Made FIFO's as general inferrable memory where possible.
// So on FPGA they should be inferred as RAM (Distributed RAM on Xilinx).
// This saves about 1/3 of the Slice count and reduces P&R and synthesis times.
//
// * Added optional baudrate output (baud_o).
// This is identical to BAUDOUT* signal on 16550 chip.
// It outputs 16xbit_clock_rate - the divided clock.
// It's disabled by default. Define UART_HAS_BAUDRATE_OUTPUT to use.
//
// Revision 1.10 2001/12/11 08:55:40 mohor
// Scratch register define added.
//
// Revision 1.9 2001/12/03 21:44:29 gorban
// Updated specification documentation.
// Added full 32-bit data bus interface, now as default.
// Address is 5-bit wide in 32-bit data bus mode.
// Added wb_sel_i input to the core. It's used in the 32-bit mode.
// Added debug interface with two 32-bit read-only registers in 32-bit mode.
// Bits 5 and 6 of LSR are now only cleared on TX FIFO write.
// My small test bench is modified to work with 32-bit mode.
//
// Revision 1.8 2001/11/26 21:38:54 gorban
// Lots of fixes:
// Break condition wasn't handled correctly at all.
// LSR bits could lose their values.
// LSR value after reset was wrong.
// Timing of THRE interrupt signal corrected.
// LSR bit 0 timing corrected.
//
// Revision 1.7 2001/08/24 21:01:12 mohor
// Things connected to parity changed.
// Clock devider changed.
//
// Revision 1.6 2001/08/23 16:05:05 mohor
// Stop bit bug fixed.
// Parity bug fixed.
// WISHBONE read cycle bug fixed,
// OE indicator (Overrun Error) bug fixed.
// PE indicator (Parity Error) bug fixed.
// Register read bug fixed.
//
// Revision 1.5 2001/05/31 20:08:01 gorban
// FIFO changes and other corrections.
//
// Revision 1.4 2001/05/21 19:12:02 gorban
// Corrected some Linter messages.
//
// Revision 1.3 2001/05/17 18:34:18 gorban
// First 'stable' release. Should be sythesizable now. Also added new header.
//
// Revision 1.0 2001-05-17 21:27:11+02 jacob
// Initial revision
//
//
// Uncomment this if you want your UART to have
// 16xBaudrate output port.
// If defined, the enable signal will be used to drive baudrate_o signal
// It's frequency is 16xbaudrate
// `define UART_HAS_BAUDRATE_OUTPUT
// Register addresses
`define UART_REG_RB 3'd0 // receiver buffer
`define UART_REG_TR 3'd0 // transmitter
`define UART_REG_IE 3'd1 // Interrupt enable
`define UART_REG_II 3'd2 // Interrupt identification
`define UART_REG_FC 3'd2 // FIFO control
`define UART_REG_LC 3'd3 // Line Control
`define UART_REG_MC 3'd4 // Modem control
`define UART_REG_LS 3'd5 // Line status
`define UART_REG_MS 3'd6 // Modem status
`define UART_REG_SR 3'd7 // Scratch register
`define UART_REG_DL1 3'd0 // Divisor latch bytes (1-2)
`define UART_REG_DL2 3'd1
// Interrupt Enable register bits
`define UART_IE_RDA 0 // Received Data available interrupt
`define UART_IE_THRE 1 // Transmitter Holding Register empty interrupt
`define UART_IE_RLS 2 // Receiver Line Status Interrupt
`define UART_IE_MS 3 // Modem Status Interrupt
// Interrupt Identification register bits
`define UART_II_IP 0 // Interrupt pending when 0
`define UART_II_II 3:1 // Interrupt identification
// Interrupt identification values for bits 3:1
`define UART_II_RLS 3'b011 // Receiver Line Status
`define UART_II_RDA 3'b010 // Receiver Data available
`define UART_II_TI 3'b110 // Timeout Indication
`define UART_II_THRE 3'b001 // Transmitter Holding Register empty
`define UART_II_MS 3'b000 // Modem Status
// FIFO Control Register bits
`define UART_FC_TL 1:0 // Trigger level
// FIFO trigger level values
`define UART_FC_1 2'b00
`define UART_FC_4 2'b01
`define UART_FC_8 2'b10
`define UART_FC_14 2'b11
// Line Control register bits
`define UART_LC_BITS 1:0 // bits in character
`define UART_LC_SB 2 // stop bits
`define UART_LC_PE 3 // parity enable
`define UART_LC_EP 4 // even parity
`define UART_LC_SP 5 // stick parity
`define UART_LC_BC 6 // Break control
`define UART_LC_DL 7 // Divisor Latch access bit
// Modem Control register bits
`define UART_MC_DTR 0
`define UART_MC_RTS 1
`define UART_MC_OUT1 2
`define UART_MC_OUT2 3
`define UART_MC_LB 4 // Loopback mode
// Line Status Register bits
`define UART_LS_DR 0 // Data ready
`define UART_LS_OE 1 // Overrun Error
`define UART_LS_PE 2 // Parity Error
`define UART_LS_FE 3 // Framing Error
`define UART_LS_BI 4 // Break interrupt
`define UART_LS_TFE 5 // Transmit FIFO is empty
`define UART_LS_TE 6 // Transmitter Empty indicator
`define UART_LS_EI 7 // Error indicator
// Modem Status Register bits
`define UART_MS_DCTS 0 // Delta signals
`define UART_MS_DDSR 1
`define UART_MS_TERI 2
`define UART_MS_DDCD 3
`define UART_MS_CCTS 4 // Complement signals
`define UART_MS_CDSR 5
`define UART_MS_CRI 6
`define UART_MS_CDCD 7
// FIFO parameter defines
`define UART_FIFO_WIDTH 8
`define UART_FIFO_DEPTH 16
`define UART_FIFO_POINTER_W 4
`define UART_FIFO_COUNTER_W 5
// receiver fifo has width 11 because it has break, parity and framing error bits
`define UART_FIFO_REC_WIDTH 11
`define VERBOSE_WB 0 // All activity on the WISHBONE is recorded
`define VERBOSE_LINE_STATUS 0 // Details about the lsr (line status register)
`define FAST_TEST 1 // 64/1024 packets are sent