303 lines
15 KiB
Systemverilog
303 lines
15 KiB
Systemverilog
// SPDX-License-Identifier: Apache-2.0
|
|
// Copyright 2020 Western Digital Corporation or its affiliates.
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
//
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
|
|
//********************************************************************************
|
|
// $Id$
|
|
//
|
|
//
|
|
// Owner:
|
|
// Function: DCCM for LSU pipe
|
|
// Comments: Single ported memory
|
|
//
|
|
//
|
|
// DC1 -> DC2 -> DC3 -> DC4 (Commit)
|
|
//
|
|
// //********************************************************************************
|
|
|
|
|
|
|
|
`define LOCAL_DCCM_RAM_TEST_PORTS .TEST1(dccm_ext_in_pkt[i].TEST1), \
|
|
.RME(dccm_ext_in_pkt[i].RME), \
|
|
.RM(dccm_ext_in_pkt[i].RM), \
|
|
.LS(dccm_ext_in_pkt[i].LS), \
|
|
.DS(dccm_ext_in_pkt[i].DS), \
|
|
.SD(dccm_ext_in_pkt[i].SD), \
|
|
.TEST_RNM(dccm_ext_in_pkt[i].TEST_RNM), \
|
|
.BC1(dccm_ext_in_pkt[i].BC1), \
|
|
.BC2(dccm_ext_in_pkt[i].BC2), \
|
|
|
|
|
|
|
|
module lsu_dccm_mem
|
|
//`include "parameter.sv"
|
|
#(
|
|
|
|
parameter DCCM_BYTE_WIDTH,
|
|
parameter DCCM_BITS,
|
|
parameter DCCM_NUM_BANKS,
|
|
parameter DCCM_ENABLE= 'b1,
|
|
parameter DCCM_BANK_BITS,
|
|
parameter DCCM_SIZE,
|
|
parameter DCCM_FDATA_WIDTH,
|
|
parameter DCCM_WIDTH_BITS
|
|
)
|
|
(
|
|
input logic clk, // Clock only while core active. Through one clock header. For flops with second clock header built in. Connected to ACTIVE_L2CLK.
|
|
input logic active_clk, // Clock only while core active. Through two clock headers. For flops without second clock header built in.
|
|
input logic rst_l, // reset, active low
|
|
input logic clk_override, // Override non-functional clock gating
|
|
|
|
input logic dccm_wren, // write enable
|
|
input logic dccm_rden, // read enable
|
|
input logic [DCCM_BITS-1:0] dccm_wr_addr_lo, // write address
|
|
input logic [DCCM_BITS-1:0] dccm_wr_addr_hi, // write address
|
|
input logic [DCCM_BITS-1:0] dccm_rd_addr_lo, // read address
|
|
input logic [DCCM_BITS-1:0] dccm_rd_addr_hi, // read address for the upper bank in case of a misaligned access
|
|
input logic [DCCM_FDATA_WIDTH-1:0] dccm_wr_data_lo, // write data
|
|
input logic [DCCM_FDATA_WIDTH-1:0] dccm_wr_data_hi, // write data
|
|
input dccm_ext_in_pkt_t [DCCM_NUM_BANKS-1:0] dccm_ext_in_pkt, // the dccm packet from the soc
|
|
|
|
output logic [DCCM_FDATA_WIDTH-1:0] dccm_rd_data_lo, // read data from the lo bank
|
|
output logic [DCCM_FDATA_WIDTH-1:0] dccm_rd_data_hi, // read data from the hi bank
|
|
|
|
input logic scan_mode
|
|
);
|
|
|
|
|
|
//localparam DCCM_WIDTH_BITS = $clog2(DCCM_BYTE_WIDTH);
|
|
localparam DCCM_INDEX_BITS = (DCCM_BITS - DCCM_BANK_BITS - DCCM_WIDTH_BITS);
|
|
localparam DCCM_INDEX_DEPTH = ((DCCM_SIZE)*1024)/((DCCM_BYTE_WIDTH)*(DCCM_NUM_BANKS)); // Depth of memory bank
|
|
|
|
logic [DCCM_NUM_BANKS-1:0] wren_bank;
|
|
logic [DCCM_NUM_BANKS-1:0] rden_bank;
|
|
logic [DCCM_NUM_BANKS-1:0] [DCCM_BITS-1:(DCCM_BANK_BITS+2)] addr_bank;
|
|
logic [DCCM_BITS-1:(DCCM_BANK_BITS+DCCM_WIDTH_BITS)] rd_addr_even, rd_addr_odd;
|
|
logic rd_unaligned, wr_unaligned;
|
|
logic [DCCM_NUM_BANKS-1:0] [DCCM_FDATA_WIDTH-1:0] dccm_bank_dout;
|
|
logic [DCCM_FDATA_WIDTH-1:0] wrdata;
|
|
|
|
logic [DCCM_NUM_BANKS-1:0][DCCM_FDATA_WIDTH-1:0] wr_data_bank;
|
|
|
|
logic [(DCCM_WIDTH_BITS+DCCM_BANK_BITS-1):DCCM_WIDTH_BITS] dccm_rd_addr_lo_q;
|
|
logic [(DCCM_WIDTH_BITS+DCCM_BANK_BITS-1):DCCM_WIDTH_BITS] dccm_rd_addr_hi_q;
|
|
|
|
logic [DCCM_NUM_BANKS-1:0] dccm_clken;
|
|
|
|
assign rd_unaligned = (dccm_rd_addr_lo[DCCM_WIDTH_BITS+:DCCM_BANK_BITS] != dccm_rd_addr_hi[DCCM_WIDTH_BITS+:DCCM_BANK_BITS]);
|
|
assign wr_unaligned = (dccm_wr_addr_lo[DCCM_WIDTH_BITS+:DCCM_BANK_BITS] != dccm_wr_addr_hi[DCCM_WIDTH_BITS+:DCCM_BANK_BITS]);
|
|
|
|
// Align the read data
|
|
assign dccm_rd_data_lo[DCCM_FDATA_WIDTH-1:0] = dccm_bank_dout[dccm_rd_addr_lo_q[DCCM_WIDTH_BITS+:DCCM_BANK_BITS]][DCCM_FDATA_WIDTH-1:0];
|
|
assign dccm_rd_data_hi[DCCM_FDATA_WIDTH-1:0] = dccm_bank_dout[dccm_rd_addr_hi_q[DCCM_WIDTH_BITS+:DCCM_BANK_BITS]][DCCM_FDATA_WIDTH-1:0];
|
|
|
|
|
|
// 8 Banks, 16KB each (2048 x 72)
|
|
for (genvar i=0; i<DCCM_NUM_BANKS; i++) begin: mem_bank
|
|
assign wren_bank[i] = dccm_wren & ((dccm_wr_addr_hi[2+:DCCM_BANK_BITS] == i) | (dccm_wr_addr_lo[2+:DCCM_BANK_BITS] == i));
|
|
assign rden_bank[i] = dccm_rden & ((dccm_rd_addr_hi[2+:DCCM_BANK_BITS] == i) | (dccm_rd_addr_lo[2+:DCCM_BANK_BITS] == i));
|
|
assign addr_bank[i][(DCCM_BANK_BITS+DCCM_WIDTH_BITS)+:DCCM_INDEX_BITS] = wren_bank[i] ? (((dccm_wr_addr_hi[2+:DCCM_BANK_BITS] == i) & wr_unaligned) ?
|
|
dccm_wr_addr_hi[(DCCM_BANK_BITS+DCCM_WIDTH_BITS)+:DCCM_INDEX_BITS] :
|
|
dccm_wr_addr_lo[(DCCM_BANK_BITS+DCCM_WIDTH_BITS)+:DCCM_INDEX_BITS]) :
|
|
(((dccm_rd_addr_hi[2+:DCCM_BANK_BITS] == i) & rd_unaligned) ?
|
|
dccm_rd_addr_hi[(DCCM_BANK_BITS+DCCM_WIDTH_BITS)+:DCCM_INDEX_BITS] :
|
|
dccm_rd_addr_lo[(DCCM_BANK_BITS+DCCM_WIDTH_BITS)+:DCCM_INDEX_BITS]);
|
|
|
|
assign wr_data_bank[i] = ((dccm_wr_addr_hi[2+:DCCM_BANK_BITS] == i) & wr_unaligned) ? dccm_wr_data_hi[DCCM_FDATA_WIDTH-1:0] : dccm_wr_data_lo[DCCM_FDATA_WIDTH-1:0];
|
|
|
|
// clock gating section
|
|
assign dccm_clken[i] = (wren_bank[i] | rden_bank[i] | clk_override) ;
|
|
// end clock gating section
|
|
|
|
`ifdef VERILATOR
|
|
|
|
el2_ram #(DCCM_INDEX_DEPTH,39) ram (
|
|
// Primary ports
|
|
.ME(dccm_clken[i]),
|
|
.CLK(clk),
|
|
.WE(wren_bank[i]),
|
|
.ADR(addr_bank[i]),
|
|
.D(wr_data_bank[i][DCCM_FDATA_WIDTH-1:0]),
|
|
.Q(dccm_bank_dout[i][DCCM_FDATA_WIDTH-1:0]),
|
|
.ROP ( ),
|
|
// These are used by SoC
|
|
`LOCAL_DCCM_RAM_TEST_PORTS
|
|
.*
|
|
);
|
|
`else
|
|
|
|
if (DCCM_INDEX_DEPTH == 32768) begin : dccm
|
|
ram_32768x39 dccm_bank (
|
|
// Primary ports
|
|
.ME(dccm_clken[i]),
|
|
.CLK(clk),
|
|
.WE(wren_bank[i]),
|
|
.ADR(addr_bank[i]),
|
|
.D(wr_data_bank[i][DCCM_FDATA_WIDTH-1:0]),
|
|
.Q(dccm_bank_dout[i][DCCM_FDATA_WIDTH-1:0]),
|
|
.ROP ( ),
|
|
// These are used by SoC
|
|
`LOCAL_DCCM_RAM_TEST_PORTS
|
|
.*
|
|
);
|
|
end
|
|
else if (DCCM_INDEX_DEPTH == 16384) begin : dccm
|
|
ram_16384x39 dccm_bank (
|
|
// Primary ports
|
|
.ME(dccm_clken[i]),
|
|
.CLK(clk),
|
|
.WE(wren_bank[i]),
|
|
.ADR(addr_bank[i]),
|
|
.D(wr_data_bank[i][DCCM_FDATA_WIDTH-1:0]),
|
|
.Q(dccm_bank_dout[i][DCCM_FDATA_WIDTH-1:0]),
|
|
.ROP ( ),
|
|
// These are used by SoC
|
|
`LOCAL_DCCM_RAM_TEST_PORTS
|
|
.*
|
|
);
|
|
end
|
|
else if (DCCM_INDEX_DEPTH == 8192) begin : dccm
|
|
ram_8192x39 dccm_bank (
|
|
// Primary ports
|
|
.ME(dccm_clken[i]),
|
|
.CLK(clk),
|
|
.WE(wren_bank[i]),
|
|
.ADR(addr_bank[i]),
|
|
.D(wr_data_bank[i][DCCM_FDATA_WIDTH-1:0]),
|
|
.Q(dccm_bank_dout[i][DCCM_FDATA_WIDTH-1:0]),
|
|
.ROP ( ),
|
|
// These are used by SoC
|
|
`LOCAL_DCCM_RAM_TEST_PORTS
|
|
.*
|
|
);
|
|
end
|
|
else if (DCCM_INDEX_DEPTH == 4096) begin : dccm
|
|
ram_4096x39 dccm_bank (
|
|
// Primary ports
|
|
.ME(dccm_clken[i]),
|
|
.CLK(clk),
|
|
.WE(wren_bank[i]),
|
|
.ADR(addr_bank[i]),
|
|
.D(wr_data_bank[i][DCCM_FDATA_WIDTH-1:0]),
|
|
.Q(dccm_bank_dout[i][DCCM_FDATA_WIDTH-1:0]),
|
|
.ROP ( ),
|
|
// These are used by SoC
|
|
`LOCAL_DCCM_RAM_TEST_PORTS
|
|
.*
|
|
);
|
|
end
|
|
else if (DCCM_INDEX_DEPTH == 3072) begin : dccm
|
|
ram_3072x39 dccm_bank (
|
|
// Primary ports
|
|
.ME(dccm_clken[i]),
|
|
.CLK(clk),
|
|
.WE(wren_bank[i]),
|
|
.ADR(addr_bank[i]),
|
|
.D(wr_data_bank[i][DCCM_FDATA_WIDTH-1:0]),
|
|
.Q(dccm_bank_dout[i][DCCM_FDATA_WIDTH-1:0]),
|
|
.ROP ( ),
|
|
// These are used by SoC
|
|
`LOCAL_DCCM_RAM_TEST_PORTS
|
|
.*
|
|
);
|
|
end
|
|
else if (DCCM_INDEX_DEPTH == 2048) begin : dccm
|
|
ram_2048x39 dccm_bank (
|
|
// Primary ports
|
|
.ME(dccm_clken[i]),
|
|
.CLK(clk),
|
|
.WE(wren_bank[i]),
|
|
.ADR(addr_bank[i]),
|
|
.D(wr_data_bank[i][DCCM_FDATA_WIDTH-1:0]),
|
|
.Q(dccm_bank_dout[i][DCCM_FDATA_WIDTH-1:0]),
|
|
.ROP ( ),
|
|
// These are used by SoC
|
|
`LOCAL_DCCM_RAM_TEST_PORTS
|
|
.*
|
|
);
|
|
end
|
|
else if (DCCM_INDEX_DEPTH == 1024) begin : dccm
|
|
ram_1024x39 dccm_bank (
|
|
// Primary ports
|
|
.ME(dccm_clken[i]),
|
|
.CLK(clk),
|
|
.WE(wren_bank[i]),
|
|
.ADR(addr_bank[i]),
|
|
.D(wr_data_bank[i][DCCM_FDATA_WIDTH-1:0]),
|
|
.Q(dccm_bank_dout[i][DCCM_FDATA_WIDTH-1:0]),
|
|
.ROP ( ),
|
|
// These are used by SoC
|
|
`LOCAL_DCCM_RAM_TEST_PORTS
|
|
.*
|
|
);
|
|
end
|
|
else if (DCCM_INDEX_DEPTH == 512) begin : dccm
|
|
ram_512x39 dccm_bank (
|
|
// Primary ports
|
|
.ME(dccm_clken[i]),
|
|
.CLK(clk),
|
|
.WE(wren_bank[i]),
|
|
.ADR(addr_bank[i]),
|
|
.D(wr_data_bank[i][DCCM_FDATA_WIDTH-1:0]),
|
|
.Q(dccm_bank_dout[i][DCCM_FDATA_WIDTH-1:0]),
|
|
.ROP ( ),
|
|
// These are used by SoC
|
|
`LOCAL_DCCM_RAM_TEST_PORTS
|
|
.*
|
|
);
|
|
end
|
|
else if (DCCM_INDEX_DEPTH == 256) begin : dccm
|
|
ram_256x39 dccm_bank (
|
|
// Primary ports
|
|
.ME(dccm_clken[i]),
|
|
.CLK(clk),
|
|
.WE(wren_bank[i]),
|
|
.ADR(addr_bank[i]),
|
|
.D(wr_data_bank[i][DCCM_FDATA_WIDTH-1:0]),
|
|
.Q(dccm_bank_dout[i][DCCM_FDATA_WIDTH-1:0]),
|
|
.ROP ( ),
|
|
// These are used by SoC
|
|
`LOCAL_DCCM_RAM_TEST_PORTS
|
|
.*
|
|
);
|
|
end
|
|
else if (DCCM_INDEX_DEPTH == 128) begin : dccm
|
|
ram_128x39 dccm_bank (
|
|
// Primary ports
|
|
.ME(dccm_clken[i]),
|
|
.CLK(clk),
|
|
.WE(wren_bank[i]),
|
|
.ADR(addr_bank[i]),
|
|
.D(wr_data_bank[i][DCCM_FDATA_WIDTH-1:0]),
|
|
.Q(dccm_bank_dout[i][DCCM_FDATA_WIDTH-1:0]),
|
|
.ROP ( ),
|
|
// These are used by SoC
|
|
`LOCAL_DCCM_RAM_TEST_PORTS
|
|
.*
|
|
);
|
|
end
|
|
`endif
|
|
|
|
end : mem_bank
|
|
|
|
// Flops
|
|
rvdff #(DCCM_BANK_BITS) rd_addr_lo_ff (.*, .din(dccm_rd_addr_lo[DCCM_WIDTH_BITS+:DCCM_BANK_BITS]), .dout(dccm_rd_addr_lo_q[DCCM_WIDTH_BITS+:DCCM_BANK_BITS]), .clk(active_clk));
|
|
rvdff #(DCCM_BANK_BITS) rd_addr_hi_ff (.*, .din(dccm_rd_addr_hi[DCCM_WIDTH_BITS+:DCCM_BANK_BITS]), .dout(dccm_rd_addr_hi_q[DCCM_WIDTH_BITS+:DCCM_BANK_BITS]), .clk(active_clk));
|
|
|
|
`undef LOCAL_DCCM_RAM_TEST_PORTS
|
|
|
|
endmodule // lsu_dccm_mem
|
|
|
|
|