quasar/design/target/scala-2.12/classes/vsrc/uart_receiver.v

476 lines
17 KiB
Verilog

//////////////////////////////////////////////////////////////////////
//// ////
//// uart_receiver.v ////
//// ////
//// ////
//// This file is part of the "UART 16550 compatible" project ////
//// http://www.opencores.org/cores/uart16550/ ////
//// ////
//// Documentation related to this project: ////
//// - http://www.opencores.org/cores/uart16550/ ////
//// ////
//// Projects compatibility: ////
//// - WISHBONE ////
//// RS232 Protocol ////
//// 16550D uart (mostly supported) ////
//// ////
//// Overview (main Features): ////
//// UART core receiver logic ////
//// ////
//// Known problems (limits): ////
//// None known ////
//// ////
//// To Do: ////
//// Thourough testing. ////
//// ////
//// Author(s): ////
//// - gorban@opencores.org ////
//// - Jacob Gorban ////
//// - Igor Mohor (igorm@opencores.org) ////
//// ////
//// Created: 2001/05/12 ////
//// Last Updated: 2001/05/17 ////
//// (See log for the revision history) ////
//// ////
//// ////
//////////////////////////////////////////////////////////////////////
//// ////
//// Copyright (C) 2000, 2001 Authors ////
//// ////
//// This source file may be used and distributed without ////
//// restriction provided that this copyright statement is not ////
//// removed from the file and that any derivative work contains ////
//// the original copyright notice and the associated disclaimer. ////
//// ////
//// This source file is free software; you can redistribute it ////
//// and/or modify it under the terms of the GNU Lesser General ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any ////
//// later version. ////
//// ////
//// This source is distributed in the hope that it will be ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
//// PURPOSE. See the GNU Lesser General Public License for more ////
//// details. ////
//// ////
//// You should have received a copy of the GNU Lesser General ////
//// Public License along with this source; if not, download it ////
//// from http://www.opencores.org/lgpl.shtml ////
//// ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: not supported by cvs2svn $
// Revision 1.29 2002/07/29 21:16:18 gorban
// The uart_defines.v file is included again in sources.
//
// Revision 1.28 2002/07/22 23:02:23 gorban
// Bug Fixes:
// * Possible loss of sync and bad reception of stop bit on slow baud rates fixed.
// Problem reported by Kenny.Tung.
// * Bad (or lack of ) loopback handling fixed. Reported by Cherry Withers.
//
// Improvements:
// * Made FIFO's as general inferrable memory where possible.
// So on FPGA they should be inferred as RAM (Distributed RAM on Xilinx).
// This saves about 1/3 of the Slice count and reduces P&R and synthesis times.
//
// * Added optional baudrate output (baud_o).
// This is identical to BAUDOUT* signal on 16550 chip.
// It outputs 16xbit_clock_rate - the divided clock.
// It's disabled by default. Define UART_HAS_BAUDRATE_OUTPUT to use.
//
// Revision 1.27 2001/12/30 20:39:13 mohor
// More than one character was stored in case of break. End of the break
// was not detected correctly.
//
// Revision 1.26 2001/12/20 13:28:27 mohor
// Missing declaration of rf_push_q fixed.
//
// Revision 1.25 2001/12/20 13:25:46 mohor
// rx push changed to be only one cycle wide.
//
// Revision 1.24 2001/12/19 08:03:34 mohor
// Warnings cleared.
//
// Revision 1.23 2001/12/19 07:33:54 mohor
// Synplicity was having troubles with the comment.
//
// Revision 1.22 2001/12/17 14:46:48 mohor
// overrun signal was moved to separate block because many sequential lsr
// reads were preventing data from being written to rx fifo.
// underrun signal was not used and was removed from the project.
//
// Revision 1.21 2001/12/13 10:31:16 mohor
// timeout irq must be set regardless of the rda irq (rda irq does not reset the
// timeout counter).
//
// Revision 1.20 2001/12/10 19:52:05 gorban
// Igor fixed break condition bugs
//
// Revision 1.19 2001/12/06 14:51:04 gorban
// Bug in LSR[0] is fixed.
// All WISHBONE signals are now sampled, so another wait-state is introduced on all transfers.
//
// Revision 1.18 2001/12/03 21:44:29 gorban
// Updated specification documentation.
// Added full 32-bit data bus interface, now as default.
// Address is 5-bit wide in 32-bit data bus mode.
// Added wb_sel_i input to the core. It's used in the 32-bit mode.
// Added debug interface with two 32-bit read-only registers in 32-bit mode.
// Bits 5 and 6 of LSR are now only cleared on TX FIFO write.
// My small test bench is modified to work with 32-bit mode.
//
// Revision 1.17 2001/11/28 19:36:39 gorban
// Fixed: timeout and break didn't pay attention to current data format when counting time
//
// Revision 1.16 2001/11/27 22:17:09 gorban
// Fixed bug that prevented synthesis in uart_receiver.v
//
// Revision 1.15 2001/11/26 21:38:54 gorban
// Lots of fixes:
// Break condition wasn't handled correctly at all.
// LSR bits could lose their values.
// LSR value after reset was wrong.
// Timing of THRE interrupt signal corrected.
// LSR bit 0 timing corrected.
//
// Revision 1.14 2001/11/10 12:43:21 gorban
// Logic Synthesis bugs fixed. Some other minor changes
//
// Revision 1.13 2001/11/08 14:54:23 mohor
// Comments in Slovene language deleted, few small fixes for better work of
// old tools. IRQs need to be fix.
//
// Revision 1.12 2001/11/07 17:51:52 gorban
// Heavily rewritten interrupt and LSR subsystems.
// Many bugs hopefully squashed.
//
// Revision 1.11 2001/10/31 15:19:22 gorban
// Fixes to break and timeout conditions
//
// Revision 1.10 2001/10/20 09:58:40 gorban
// Small synopsis fixes
//
// Revision 1.9 2001/08/24 21:01:12 mohor
// Things connected to parity changed.
// Clock devider changed.
//
// Revision 1.8 2001/08/23 16:05:05 mohor
// Stop bit bug fixed.
// Parity bug fixed.
// WISHBONE read cycle bug fixed,
// OE indicator (Overrun Error) bug fixed.
// PE indicator (Parity Error) bug fixed.
// Register read bug fixed.
//
// Revision 1.6 2001/06/23 11:21:48 gorban
// DL made 16-bit long. Fixed transmission/reception bugs.
//
// Revision 1.5 2001/06/02 14:28:14 gorban
// Fixed receiver and transmitter. Major bug fixed.
//
// Revision 1.4 2001/05/31 20:08:01 gorban
// FIFO changes and other corrections.
//
// Revision 1.3 2001/05/27 17:37:49 gorban
// Fixed many bugs. Updated spec. Changed FIFO files structure. See CHANGES.txt file.
//
// Revision 1.2 2001/05/21 19:12:02 gorban
// Corrected some Linter messages.
//
// Revision 1.1 2001/05/17 18:34:18 gorban
// First 'stable' release. Should be sythesizable now. Also added new header.
//
// Revision 1.0 2001-05-17 21:27:11+02 jacob
// Initial revision
//
//
`include "uart_defines.v"
module uart_receiver (clk, wb_rst_i, lcr, rf_pop, srx_pad_i, enable,
counter_t, rf_count, rf_data_out, rf_error_bit, rf_overrun, rx_reset, lsr_mask, rstate, rf_push_pulse);
input clk;
input wb_rst_i;
input [7:0] lcr;
input rf_pop;
input srx_pad_i;
input enable;
input rx_reset;
input lsr_mask;
output [9:0] counter_t;
output [`UART_FIFO_COUNTER_W-1:0] rf_count;
output [`UART_FIFO_REC_WIDTH-1:0] rf_data_out;
output rf_overrun;
output rf_error_bit;
output [3:0] rstate;
output rf_push_pulse;
reg [3:0] rstate;
reg [3:0] rcounter16;
reg [2:0] rbit_counter;
reg [7:0] rshift; // receiver shift register
reg rparity; // received parity
reg rparity_error;
reg rframing_error; // framing error flag
reg rparity_xor;
reg [7:0] counter_b; // counts the 0 (low) signals
reg rf_push_q;
// RX FIFO signals
reg [`UART_FIFO_REC_WIDTH-1:0] rf_data_in;
wire [`UART_FIFO_REC_WIDTH-1:0] rf_data_out;
wire rf_push_pulse;
reg rf_push;
wire rf_pop;
wire rf_overrun;
wire [`UART_FIFO_COUNTER_W-1:0] rf_count;
wire rf_error_bit; // an error (parity or framing) is inside the fifo
wire break_error = (counter_b == 0);
// RX FIFO instance
uart_rfifo #(`UART_FIFO_REC_WIDTH) fifo_rx(
.clk( clk ),
.wb_rst_i( wb_rst_i ),
.data_in( rf_data_in ),
.data_out( rf_data_out ),
.push( rf_push_pulse ),
.pop( rf_pop ),
.overrun( rf_overrun ),
.count( rf_count ),
.error_bit( rf_error_bit ),
.fifo_reset( rx_reset ),
.reset_status(lsr_mask)
);
wire rcounter16_eq_7 = (rcounter16 == 4'd7);
wire rcounter16_eq_0 = (rcounter16 == 4'd0);
wire [3:0] rcounter16_minus_1 = rcounter16 - 3'd1;
parameter sr_idle = 4'd0;
parameter sr_rec_start = 4'd1;
parameter sr_rec_bit = 4'd2;
parameter sr_rec_parity = 4'd3;
parameter sr_rec_stop = 4'd4;
parameter sr_check_parity = 4'd5;
parameter sr_rec_prepare = 4'd6;
parameter sr_end_bit = 4'd7;
parameter sr_ca_lc_parity = 4'd8;
parameter sr_wait1 = 4'd9;
parameter sr_push = 4'd10;
always @(posedge clk or posedge wb_rst_i)
begin
if (wb_rst_i)
begin
rstate <= sr_idle;
rcounter16 <= 0;
rbit_counter <= 0;
rparity_xor <= 1'b0;
rframing_error <= 1'b0;
rparity_error <= 1'b0;
rparity <= 1'b0;
rshift <= 0;
rf_push <= 1'b0;
rf_data_in <= 0;
end
else
if (enable)
begin
case (rstate)
sr_idle : begin
rf_push <= 1'b0;
rf_data_in <= 0;
rcounter16 <= 4'b1110;
if (srx_pad_i==1'b0 & ~break_error) // detected a pulse (start bit?)
begin
rstate <= sr_rec_start;
end
end
sr_rec_start : begin
rf_push <= 1'b0;
if (rcounter16_eq_7) // check the pulse
if (srx_pad_i==1'b1) // no start bit
rstate <= sr_idle;
else // start bit detected
rstate <= sr_rec_prepare;
rcounter16 <= rcounter16_minus_1;
end
sr_rec_prepare:begin
case (lcr[/*`UART_LC_BITS*/1:0]) // number of bits in a word
2'b00 : rbit_counter <= 3'b100;
2'b01 : rbit_counter <= 3'b101;
2'b10 : rbit_counter <= 3'b110;
2'b11 : rbit_counter <= 3'b111;
endcase
if (rcounter16_eq_0)
begin
rstate <= sr_rec_bit;
rcounter16 <= 4'b1110;
rshift <= 0;
end
else
rstate <= sr_rec_prepare;
rcounter16 <= rcounter16_minus_1;
end
sr_rec_bit : begin
if (rcounter16_eq_0)
rstate <= sr_end_bit;
if (rcounter16_eq_7) // read the bit
case (lcr[/*`UART_LC_BITS*/1:0]) // number of bits in a word
2'b00 : rshift[4:0] <= {srx_pad_i, rshift[4:1]};
2'b01 : rshift[5:0] <= {srx_pad_i, rshift[5:1]};
2'b10 : rshift[6:0] <= {srx_pad_i, rshift[6:1]};
2'b11 : rshift[7:0] <= {srx_pad_i, rshift[7:1]};
endcase
rcounter16 <= rcounter16_minus_1;
end
sr_end_bit : begin
if (rbit_counter==3'b0) // no more bits in word
if (lcr[`UART_LC_PE]) // choose state based on parity
rstate <= sr_rec_parity;
else
begin
rstate <= sr_rec_stop;
rparity_error <= 1'b0; // no parity - no error :)
end
else // else we have more bits to read
begin
rstate <= sr_rec_bit;
rbit_counter <= rbit_counter - 3'd1;
end
rcounter16 <= 4'b1110;
end
sr_rec_parity: begin
if (rcounter16_eq_7) // read the parity
begin
rparity <= srx_pad_i;
rstate <= sr_ca_lc_parity;
end
rcounter16 <= rcounter16_minus_1;
end
sr_ca_lc_parity : begin // rcounter equals 6
rcounter16 <= rcounter16_minus_1;
rparity_xor <= ^{rshift,rparity}; // calculate parity on all incoming data
rstate <= sr_check_parity;
end
sr_check_parity: begin // rcounter equals 5
case ({lcr[`UART_LC_EP],lcr[`UART_LC_SP]})
2'b00: rparity_error <= rparity_xor == 0; // no error if parity 1
2'b01: rparity_error <= ~rparity; // parity should sticked to 1
2'b10: rparity_error <= rparity_xor == 1; // error if parity is odd
2'b11: rparity_error <= rparity; // parity should be sticked to 0
endcase
rcounter16 <= rcounter16_minus_1;
rstate <= sr_wait1;
end
sr_wait1 : if (rcounter16_eq_0)
begin
rstate <= sr_rec_stop;
rcounter16 <= 4'b1110;
end
else
rcounter16 <= rcounter16_minus_1;
sr_rec_stop : begin
if (rcounter16_eq_7) // read the parity
begin
rframing_error <= !srx_pad_i; // no framing error if input is 1 (stop bit)
rstate <= sr_push;
end
rcounter16 <= rcounter16_minus_1;
end
sr_push : begin
///////////////////////////////////////
// $display($time, ": received: %b", rf_data_in);
if(srx_pad_i | break_error)
begin
if(break_error)
rf_data_in <= {8'b0, 3'b100}; // break input (empty character) to receiver FIFO
else
rf_data_in <= {rshift, 1'b0, rparity_error, rframing_error};
rf_push <= 1'b1;
rstate <= sr_idle;
end
else if(~rframing_error) // There's always a framing before break_error -> wait for break or srx_pad_i
begin
rf_data_in <= {rshift, 1'b0, rparity_error, rframing_error};
rf_push <= 1'b1;
rcounter16 <= 4'b1110;
rstate <= sr_rec_start;
end
end
default : rstate <= sr_idle;
endcase
end // if (enable)
end // always of receiver
always @ (posedge clk or posedge wb_rst_i)
begin
if(wb_rst_i)
rf_push_q <= 0;
else
rf_push_q <= rf_push;
end
assign rf_push_pulse = rf_push & ~rf_push_q;
//
// Break condition detection.
// Works in conjuction with the receiver state machine
reg [9:0] toc_value; // value to be set to timeout counter
always @(lcr)
case (lcr[3:0])
4'b0000 : toc_value = 447; // 7 bits
4'b0100 : toc_value = 479; // 7.5 bits
4'b0001, 4'b1000 : toc_value = 511; // 8 bits
4'b1100 : toc_value = 543; // 8.5 bits
4'b0010, 4'b0101, 4'b1001 : toc_value = 575; // 9 bits
4'b0011, 4'b0110, 4'b1010, 4'b1101 : toc_value = 639; // 10 bits
4'b0111, 4'b1011, 4'b1110 : toc_value = 703; // 11 bits
4'b1111 : toc_value = 767; // 12 bits
endcase // case(lcr[3:0])
wire [7:0] brc_value; // value to be set to break counter
assign brc_value = toc_value[9:2]; // the same as timeout but 1 insead of 4 character times
always @(posedge clk or posedge wb_rst_i)
begin
if (wb_rst_i)
counter_b <= 8'd159;
else
if (srx_pad_i)
counter_b <= brc_value; // character time length - 1
else
if(enable & counter_b != 8'b0) // only work on enable times break not reached.
counter_b <= counter_b - 8'd1; // decrement break counter
end // always of break condition detection
///
/// Timeout condition detection
reg [9:0] counter_t; // counts the timeout condition clocks
always @(posedge clk or posedge wb_rst_i)
begin
if (wb_rst_i)
counter_t <= 10'd639; // 10 bits for the default 8N1
else
if(rf_push_pulse || rf_pop || rf_count == 0) // counter is reset when RX FIFO is empty, accessed or above trigger level
counter_t <= toc_value;
else
if (enable && counter_t != 10'b0) // we don't want to underflow
counter_t <= counter_t - 10'd1;
end
endmodule