Hazard3/hdl/hazard3_regfile_1w2r.v

/*****************************************************************************\
|                      Copyright (C) 2021-2022 Luke Wren                      |
|                     SPDX-License-Identifier: Apache-2.0                     |
\*****************************************************************************/

// Register file
// Single write port, dual read port

`default_nettype none

module hazard3_regfile_1w2r #(
	parameter RESET_REGS = 0,	// Unsupported for FAKE_DUALPORT
	parameter N_REGS = 16,
	parameter W_DATA = 32,
	parameter W_ADDR = $clog2(W_DATA)	// should be localparam. ISIM...
) (
	input wire clk,
	input wire rst_n,

	input wire [W_ADDR-1:0] raddr1,
	output reg [W_DATA-1:0] rdata1,

	input wire [W_ADDR-1:0] raddr2,
	output reg [W_DATA-1:0] rdata2,

	input wire [W_ADDR-1:0] waddr,
	input wire [W_DATA-1:0] wdata,
	input wire              wen
);

generate
if (RESET_REGS) begin: real_dualport_reset
	// This will presumably always be implemented with flops
	reg [W_DATA-1:0] mem [0:N_REGS-1];

	integer i;
	always @ (posedge clk or negedge rst_n) begin
		if (!rst_n) begin
			for (i = 0; i < N_REGS; i = i + 1) begin
				mem[i] <= {W_DATA{1'b0}};
			end
			rdata1 <= {W_DATA{1'b0}};
			rdata2 <= {W_DATA{1'b0}};
		end else begin
			if (wen) begin
				mem[waddr] <= wdata;
			end
			rdata1 <= mem[raddr1];
			rdata2 <= mem[raddr2];
		end
	end
end else begin: real_dualport_noreset
	// This should be inference-compatible on FPGAs with dual-port BRAMs
	reg [W_DATA-1:0] mem [0:N_REGS-1];

	always @ (posedge clk) begin
		if (wen) begin
			mem[waddr] <= wdata;
		end
		rdata1 <= mem[raddr1];
		rdata2 <= mem[raddr2];
	end
end
endgenerate

endmodule

`default_nettype wire