abstractaccelerator/opene906/smart_run/logical/ahb/ahb.v

353 lines
9.8 KiB
Coq
Raw Normal View History

2022-02-21 18:41:54 +08:00
/*Copyright 2020-2021 T-Head Semiconductor Co., Ltd.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
//SYS MEM
`define S1_BASE_START 32'h60000000
`define S1_BASE_END 32'h600fffff
//APB
`define S2_BASE_START 32'h40000000
`define S2_BASE_END 32'h4fffffff
//IMEM
`define S4_BASE_START 32'h00000000
`define S4_BASE_END 32'h0007ffff
//DMEM
`define S5_BASE_START 32'h20000000
`define S5_BASE_END 32'h2007ffff
// &Depend("environment.h"); @35
// &ModuleBeg; @36
module ahb(
biu_pad_haddr,
biu_pad_hburst,
biu_pad_hprot,
biu_pad_hsize,
biu_pad_htrans,
biu_pad_hwdata,
biu_pad_hwrite,
haddr_s1,
haddr_s2,
haddr_s3,
hburst_s1,
hburst_s3,
hmastlock,
hprot_s1,
hprot_s3,
hrdata_s1,
hrdata_s2,
hrdata_s3,
hready_s1,
hready_s2,
hready_s3,
hresp_s1,
hresp_s2,
hresp_s3,
hsel_s1,
hsel_s2,
hsel_s3,
hsize_s1,
hsize_s3,
htrans_s1,
htrans_s3,
hwdata_s1,
hwdata_s2,
hwdata_s3,
hwrite_s1,
hwrite_s2,
hwrite_s3,
pad_biu_hrdata,
pad_biu_hready,
pad_biu_hresp,
pad_cpu_rst_b,
pll_core_cpuclk,
smpu_deny
);
// &Ports; @37
input [31:0] biu_pad_haddr;
input [2 :0] biu_pad_hburst;
input [3 :0] biu_pad_hprot;
input [2 :0] biu_pad_hsize;
input [1 :0] biu_pad_htrans;
input [31:0] biu_pad_hwdata;
input biu_pad_hwrite;
input [31:0] hrdata_s1;
input [31:0] hrdata_s2;
input [31:0] hrdata_s3;
input hready_s1;
input hready_s2;
input hready_s3;
input [1 :0] hresp_s1;
input [1 :0] hresp_s2;
input [1 :0] hresp_s3;
input pad_cpu_rst_b;
input pll_core_cpuclk;
input smpu_deny;
output [31:0] haddr_s1;
output [31:0] haddr_s2;
output [31:0] haddr_s3;
output [2 :0] hburst_s1;
output [2 :0] hburst_s3;
output hmastlock;
output [3 :0] hprot_s1;
output [3 :0] hprot_s3;
output hsel_s1;
output hsel_s2;
output hsel_s3;
output [2 :0] hsize_s1;
output [2 :0] hsize_s3;
output [1 :0] htrans_s1;
output [1 :0] htrans_s3;
output [31:0] hwdata_s1;
output [31:0] hwdata_s2;
output [31:0] hwdata_s3;
output hwrite_s1;
output hwrite_s2;
output hwrite_s3;
output [31:0] pad_biu_hrdata;
output pad_biu_hready;
output [1 :0] pad_biu_hresp;
// &Regs; @38
reg busy_s1;
reg busy_s2;
reg busy_s3;
reg busy_s4;
reg busy_s5;
reg [31:0] pad_biu_hrdata;
reg pad_biu_hready;
reg [1 :0] pad_biu_hresp;
// &Wires; @39
wire arb_block;
wire [31:0] biu_pad_haddr;
wire [2 :0] biu_pad_hburst;
wire [3 :0] biu_pad_hprot;
wire [2 :0] biu_pad_hsize;
wire [1 :0] biu_pad_htrans;
wire [31:0] biu_pad_hwdata;
wire biu_pad_hwrite;
wire [31:0] haddr_s1;
wire [31:0] haddr_s2;
wire [31:0] haddr_s3;
wire [2 :0] hburst_s1;
wire [2 :0] hburst_s2;
wire [2 :0] hburst_s3;
wire hmastlock;
wire [3 :0] hprot_s1;
wire [3 :0] hprot_s2;
wire [3 :0] hprot_s3;
wire [31:0] hrdata_s1;
wire [31:0] hrdata_s2;
wire [31:0] hrdata_s3;
wire [31:0] hrdata_s4;
wire [31:0] hrdata_s5;
wire hready_s1;
wire hready_s2;
wire hready_s3;
wire hready_s4;
wire hready_s5;
wire [1 :0] hresp_s1;
wire [1 :0] hresp_s2;
wire [1 :0] hresp_s3;
wire [1 :0] hresp_s4;
wire [1 :0] hresp_s5;
wire hsel_s1;
wire hsel_s2;
wire hsel_s3;
wire hsel_s4;
wire hsel_s5;
wire [2 :0] hsize_s1;
wire [2 :0] hsize_s2;
wire [2 :0] hsize_s3;
wire [1 :0] htrans_s1;
wire [1 :0] htrans_s2;
wire [1 :0] htrans_s3;
wire [31:0] hwdata_s1;
wire [31:0] hwdata_s2;
wire [31:0] hwdata_s3;
wire hwrite_s1;
wire hwrite_s2;
wire hwrite_s3;
wire pad_cpu_rst_b;
wire pll_core_cpuclk;
wire pre_busy_s1;
wire pre_busy_s2;
wire pre_busy_s3;
wire pre_busy_s4;
wire pre_busy_s5;
wire smpu_deny;
// Support AHB LITE
assign hmastlock = 1'b0;
// &Force("input","biu_pad_hbusreq"); @48
assign haddr_s1[31:0] = biu_pad_haddr[31:0];
assign hburst_s1[2:0] = biu_pad_hburst[2:0];
assign hprot_s1[3:0] = biu_pad_hprot[3:0];
assign hsize_s1[2:0] = biu_pad_hsize[2:0];
assign htrans_s1[1:0] = biu_pad_htrans[1:0];
assign hwrite_s1 = biu_pad_hwrite;
assign hwdata_s1[31:0] = biu_pad_hwdata[31:0];
assign haddr_s2[31:0] = biu_pad_haddr[31:0];
assign hburst_s2[2:0] = biu_pad_hburst[2:0];
assign hprot_s2[3:0] = biu_pad_hprot[3:0];
assign hsize_s2[2:0] = biu_pad_hsize[2:0];
assign htrans_s2[1:0] = biu_pad_htrans[1:0];
assign hwrite_s2 = biu_pad_hwrite;
assign hwdata_s2[31:0] = biu_pad_hwdata[31:0];
// &Force("nonport","hburst_s2"); @68
// &Force("nonport","hsize_s2"); @69
// &Force("nonport","htrans_s2"); @70
// &Force("nonport","hprot_s2"); @71
// &Force("bus","biu_pad_hprot",3,0); @72
assign haddr_s3[31:0] = biu_pad_haddr[31:0];
assign hburst_s3[2:0] = biu_pad_hburst[2:0];
assign hprot_s3[3:0] = biu_pad_hprot[3:0];
assign hsize_s3[2:0] = biu_pad_hsize[2:0];
assign htrans_s3[1:0] = biu_pad_htrans[1:0];
assign hwrite_s3 = biu_pad_hwrite;
assign hwdata_s3[31:0] = biu_pad_hwdata[31:0];
assign hready_s4 = 1'b0;
assign hrdata_s4[31:0] = 32'b0;
assign hresp_s4[1:0] = 2'b0;
// &Force("output","hsel_s4"); @95
assign hready_s5 = 1'b0;
assign hrdata_s5[31:0] = 32'b0;
assign hresp_s5[1:0] = 2'b0;
// &Force("output","hsel_s5"); @113
// &Force("output","hsel_s1"); @117
// &Force("output","hsel_s2"); @118
// &Force("output","hsel_s3"); @119
assign hsel_s1 = (biu_pad_htrans[1]==1'b1) && (biu_pad_haddr >= `S1_BASE_START) && (biu_pad_haddr <= `S1_BASE_END)
&& !arb_block && !smpu_deny;
assign hsel_s2 = (biu_pad_htrans[1]==1'b1) && (biu_pad_haddr >= `S2_BASE_START) && (biu_pad_haddr <= `S2_BASE_END)
&& !arb_block && !smpu_deny;
assign hsel_s3 = (biu_pad_htrans[1]==1'b1) && (!hsel_s1 && !hsel_s2 && !hsel_s4 && !hsel_s5
|| smpu_deny) && !arb_block;
assign hsel_s4 = 0;
assign hsel_s5 = 0;
assign pre_busy_s1 = hsel_s1 || busy_s1 && !hready_s1;
assign pre_busy_s2 = hsel_s2 || busy_s2 && !hready_s2;
assign pre_busy_s3 = hsel_s3 || busy_s3 && !hready_s3;
assign pre_busy_s4 = 1'b0;
assign pre_busy_s5 = 1'b0;
always @(posedge pll_core_cpuclk or negedge pad_cpu_rst_b)
begin
if(!pad_cpu_rst_b)begin
busy_s1 <= 1'b0;
busy_s2 <= 1'b0;
busy_s3 <= 1'b0;
busy_s4 <= 1'b0;
busy_s5 <= 1'b0;
end
else begin
busy_s1 <= pre_busy_s1;
busy_s2 <= pre_busy_s2;
busy_s3 <= pre_busy_s3;
busy_s4 <= pre_busy_s4;
busy_s5 <= pre_busy_s5;
end
end
assign arb_block = busy_s1 && !hready_s1 ||
busy_s2 && !hready_s2 ||
busy_s3 && !hready_s3 ||
busy_s4 && !hready_s4 ||
busy_s5 && !hready_s5;
//arbitration state machine
// &CombBeg; @182
always @( hresp_s3[1:0]
or hready_s5
or hresp_s1[1:0]
or busy_s3
or busy_s4
or hresp_s5[1:0]
or hrdata_s3[31:0]
or hready_s3
or busy_s2
or hrdata_s2[31:0]
or hrdata_s1[31:0]
or hresp_s4[1:0]
or busy_s5
or hready_s2
or busy_s1
or hrdata_s4[31:0]
or hready_s4
or hrdata_s5[31:0]
or hresp_s2[1:0]
or hready_s1)
begin
case({busy_s1,busy_s2,busy_s3,busy_s4,busy_s5})
5'b10000:
begin
pad_biu_hrdata[31:0] = hrdata_s1[31:0];
pad_biu_hready = hready_s1;
pad_biu_hresp[1:0] = hresp_s1[1:0];
end
5'b01000:
begin
pad_biu_hrdata[31:0] = hrdata_s2[31:0];
pad_biu_hready = hready_s2;
pad_biu_hresp[1:0] = hresp_s2[1:0];
end
5'b00100:
begin
pad_biu_hrdata[31:0] = hrdata_s3[31:0];
pad_biu_hready = hready_s3;
pad_biu_hresp[1:0] = hresp_s3[1:0];
end
5'b00010:
begin
pad_biu_hrdata[31:0] = hrdata_s4[31:0];
pad_biu_hready = hready_s4;
pad_biu_hresp[1:0] = hresp_s4[1:0];
end
5'b00001:
begin
pad_biu_hrdata[31:0] = hrdata_s5[31:0];
pad_biu_hready = hready_s5;
pad_biu_hresp[1:0] = hresp_s5[1:0];
end
default:
begin
pad_biu_hrdata[31:0] = 32'b0;
pad_biu_hready = 1'b1;
pad_biu_hresp[1:0] = 2'b0;
end
endcase
// &CombEnd; @221
end
// &ModuleEnd; @222
endmodule