abstractaccelerator/opene906/smart_run/tests/lib/clib/config.h

119 lines
3.2 KiB
C
Raw Normal View History

2022-02-21 18:41:54 +08:00
/*Copyright 2020-2021 T-Head Semiconductor Co., Ltd.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* file: config.h
*
* Some CPU configure infomation:
* Data type, Baudrate for UART;
* MGU, CACHE, SPM, System Frequency.
*
*/
#ifndef __DEMO_CONFIG_H
#define __DEMO_CONFIG_H
/******************************
* Data type.
*****************************/
#ifndef U32
#define U32 unsigned int
#define U8 unsigned char
#endif
/************************************
* UART Terminal
* (8 data bitbs, ODD, 1 stop bits)
***********************************/
#define BAUDRATE 19200
/*******************************
* Config System
*******************************/
/*
* Run on SPARK ?
* 0 -- run on board, 1 -- run on spark.
*/
#define CONFIG_SYS_SPARK 1
/* CPU frequence definition */
#define SYS_FREQ 100000000 /* MHz */
/* APB frequence definition */
#define APB_FREQ 100000000 /* MHz */
#define CLOCKS_PER_SEC APB_FREQ
/*******************************
* Config CPU cache
******************************/
/* 0 - rw; 1 - rwc; 2 - rwc; 3 - rw */
#define CONFIG_CK510_MGU_BLOCKS 0xff06
/* 0 - baseaddr: 0x0; size: 4G */
#define CONFIG_CK510_MGU_REGION1 0x3f
/* 1- baseaddr: 0x8000000; size: 8M */
#define CONFIG_CK510_MGU_REGION2 0x800002f
/* 2- baseaddr: 0x0; size: 64K */
#define CONFIG_CK510_MGU_REGION3 0x2f
/* 3- baseaddr: 0x0; size: 64k */
#undef CONFIG_CK510_MGU_REGION4
#define CONFIG_CK510_ICACHE 1
#define CONFIG_CK510_DCACHE 1
/*********************************
* Config CKCORE SPM
********************************/
/* Having SPM ? */
#define CONFIG_CKCORE_SPM 0
/* Enable SPM?*/
#define CONFIG_CKCORE_SPM_ENABLE 1
/* Uniform SPM ? */
#define CONFIG_CKCORE_SPM_UNIFORM 0
/*
* Instruction SPM start address mapping
* Data SPM start address mapping
* Fixed with ckcore.ld ?
*
* You can delete __ckcore_dspm from ckcore.ld,
* and define CONFIG_CKCORE_DSPM_ADDRESS with
* other value, such as stack base address.
*/
#if CONFIG_CKCORE_SPM_UNIFORM
#define CONFIG_CKCORE_SPM_ADDRESS __ckcore_ispm
#define CONFIG_CKCORE_ISPM_ADDRESS CONFIG_CKCORE_SPM_ADDRESS
#define CONFIG_CKCORE_DSPM_ADDRESS CONFIG_CKCORE_SPM_ADDRESS
#else
#define CONFIG_CKCORE_ISPM_ADDRESS __ckcore_ispm
#define CONFIG_CKCORE_DSPM_ADDRESS __ckcore_dspm
#endif
/*
* SPM Size
* Fixed with target.
* please modify ckcore.ld.
*/
#define CONFIG_CKCORE_ISPM_SIZE 16384
#define CONFIG_CKCORE_DSPM_SIZE 8192
/* SPM mode */
#define CONFIG_CKCORE_ISPM_MODE 1 /* 0 - Cache, 1 - Local memory */
#define CONFIG_CKCORE_DSPM_MODE 1 /* 0 - Cache, 1 - Local memory */
/* SPM Transfer ? */
#define CONFIG_CKCORE_ISPM_TRANSFER 1 /* 0 - NO, 1 - YES */
#define CONFIG_CKCORE_DSPM_TRANSFER 1 /* 0 - NO, 1 - YES */
#endif /* __DEMO_CONFIG_H */