1c7f51ed60
With arachne-pnr this circuit couldn't hit 60MHz, just barely under it. OTOH, nextpnr hits about ~68 MHz. So let's set it somewhere inbetween to make sure this is true over time! Signed-off-by: Austin Seipp <aseipp@pobox.com> |
||
|---|---|---|
| .. | ||
| .gitignore | ||
| Makefile | ||
| example.pcf | ||
| example.v | ||
| example_tb.v | ||
| firmware.S | ||
| firmware.c | ||
| firmware.lds | ||
| readme.md | ||
readme.md
To build the example LED-blinking firmware for an HX8K Breakout Board and get a timing report (checked against the default 12MHz oscillator):
$ make clean example.bin timing
To run all the simulation tests:
$ make clean example_sim synth_sim route_sim FIRMWARE_COUNTER_BITS=4
(You must run the clean target to rebuild the firmware with the updated
FIRMWARE_COUNTER_BITS parameter; the firmware source must be recompiled for
simulation vs hardware, but this is not tracked as a Makefile dependency.)