EL2 SweRV RISC-V Core Chiselified Version from LAMPRO MELLON

This repository contains the SweRV-EL2 Core design in CHISEL

Background

Enter here

Directory Structure

├── project                             # 
│   ├── project                         #        
│   └── target                          #   
├── src
│   ├── main                            #
│       ├── resource                    #
│           └── vsrc                    #
│       └── scala                       #
│           ├── dbg                     #
│           ├── dec                     #               
│           ├── dmi                     #   
│           ├── exu                     #
│           ├── ifu                     #   
│           ├── include                 #   
│           ├── lib                     #   
│           ├── lsu                     #       
│           ├── snapshot                #   
│           ├── el2_dma_ctrl.scala      #   
│           ├── el2_pic_ctl.scala       # 
│           └── el2_swerv.scala         #       
│   └── test                            #   
│       └── scala                       #   
│           └── lib                     #   
├── rtl                                 #
│   ├── *****                           #   
│   └── *****                           #
├── target                              #
│   ├── scala-2.12                      #
│   └── streams                         #    
├── test_run_dir                        #
└── build.sbt                           #  Scala-based DSL  

Dependencies

• Verilator (4.020 or later) must be installed on the system if running with verilator
• RISCV tool chain (based on gcc version 7.3 or higher) must be installed so that it can be used to prepare RISCV binaries to run.
• Sbt (1.3.13 or later) must be installed on the system.

Quickstart guide

1. Clone the repository
2. Setup RV_ROOT to point to the path in your local filesystem
3. Determine your configuration {optional}
4. Run make with tools/Makefile

Configurations

This script derives the following consistent set of include files :

Building a model

while in a work directory:

1. Set the RV_ROOT environment variable to the root of the SweRV directory structure. Example for bash shell:
   export RV_ROOT=/path/to/swerv
   Example for csh or its derivatives:
   `setenv RV_ROOT /path/to/swerv

2. Create your specific configuration

Enter here

3. Running a simple Hello World program (verilator)

Enter here

The simulation produces output on the screen like:

Enter here

The simulation generates following files:

Enter here

You can re-execute simulation using:

Enter here

The simulation run/build command has following generic form:

Enter here

where,

Enter here

If you want to compile a test only, you can run:

Enter here

The $RV_ROOT/testbench/asm directory contains following tests ready to simulate:

hello_world      - default tes to run, prints Hello World message to screen and console.log
hello_world_dccm  - the same as above, but takes the string from preloaded DCCM.
hello_world_iccm  - the same as hello_world, but loads the test code to ICCM via LSU to DMA bridge and then executes
                  it from there. Runs on EL2 with AXI4 buses only. 
cmark             - coremark benchmark running with code and data in external memories
cmark_dccm        - the same as above, running data and stack from DCCM (faster)
cmark_iccm        - the same as above with preloaded code to ICCM. 

Building an FPGA speed optimized model: